KV8414 16" Full Extension Hold-Out Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8414P 16

Knape And Vogt 16 Inch Drawer Slides For Work Surfaces

Knape and Vogt 16 inch drawer slides give you full extension travel, so the connected work surface or pull-out section can open its full designed length for clear access. These 8414 Series slides use a ball bearing design, which supports smoother motion along the length of travel and helps the work surface open and close in a more controlled way during repeated use. The slides are unhanded side mount, so each member can be installed on either side position of the cabinet or support structure without needing left- and right-specific parts, which simplifies layout on the job. A hold out feature is built in for work surfaces, and this feature is designed to lock and maintain the work surface in the extended open position, so the surface stays deployed for tasks instead of drifting back toward the cabinet.

Key Working Details Of The 8414P 16 Slides

• The 16 inch length sets the extension range, which lets you plan cabinet depth and work surface travel so the open position aligns with surrounding fixtures and gives usable workspace.
• The side mount design locates the slides on the cabinet sides, which keeps the bottom area clear and helps when coordinating with under-mount components or obstructions beneath the moving surface.
• A ball bearing construction supports the moving members, which helps the slide track stay more consistent under load during opening and closing over repeated cycles.
• The slides provide full extension, which allows the work surface or drawer to come fully forward so tools, materials, or equipment on the surface can be reached without leaning into the cabinet.
• The hold out feature is designed for work surfaces, which keeps the extended surface locked in place for tasks where a stable, non-retracting position is needed during use.
• The unhanded configuration allows each slide to work on either side, which reduces part sorting and streamlines installation when multiple work surfaces or slides are being installed in one run.

Installation Dimensions And Fastener Selection Details

The recommended side clearance is 1/2 inch plus or minus 1/32 inch on each side, which defines the space between the mounted slide and the moving member so the ball bearing action can operate without binding or excess play. The slide height is 1-13/16 inch, which helps when laying out vertical spacing in the cabinet and when coordinating with neighboring hardware such as adjacent slides or structural rails. A 32mm pattern is specified, which aligns the slide mounting to the common 32mm system for cabinet hole drilling and helps tie slide placement into existing line-bored layouts. The recommended fasteners are #7 x 5/8 inch Phillips pan head, which fit the mounting pattern and length requirement so the slide can be anchored to typical cabinet materials while keeping consistent head geometry in the recessed mounting areas.

Using 8414P 16 Slides For Stable Work Surfaces

Where These Side Mount Slides Are Applied

These Knape and Vogt 8414 Series side mount ball bearing slides are described for work surfaces, and the hold out feature is specifically designed to lock and maintain those surfaces in the extended open position, so pull-out work areas stay fully deployed while tasks are performed. With a 16 inch length and full extension operation, the slides carry the surface outward so it clears the cabinet front, which is useful when the working area needs to project into the room for comfortable reach. The specified 1/2 inch plus or minus 1/32 inch side clearance on each side defines the pocket size needed between the cabinet interior walls and the work surface supports, which allows planning of construction dimensions around existing casework. The 1-13/16 inch overall slide height provides a known profile when integrating these slides into stacked components, so vertical space can be allocated accurately.

Details That Support Repeatable Mounting And Results

The 32mm pattern on the 8414P 16 drawer slides ties the mounting holes to a standardized system, which supports repeatable hole drilling on line-boring equipment and helps align slide positions across multiple cabinets. The unhanded side mount design means each slide can serve on either the left or right side, which simplifies stocking and reduces time spent matching parts during installation on multi-bay workstations. The ball bearing mechanism in the slide supports smooth, guided travel along its full extension, which contributes to predictable feel when opening and closing and can help maintain alignment between the two sides of a wide work surface. Using the recommended #7 x 5/8 inch Phillips pan head fasteners matches the stated design, which supports consistent clamping of the slide flanges against typical cabinet side materials. The zinc finish identified in the description provides a metal surface treatment on the slides, which helps the components present a uniform appearance in exposed or semi-exposed locations.

Common Questions About KV 8414 Work Surface Slides

Selecting 8414P 16 Slides For Work Surface Projects

The Knape and Vogt 16 inch drawer slides with hold out feature bring together full extension travel, a 32mm mounting pattern, and unhanded side mount installation, so work surface projects can be laid out around known clearances and standardized drilling. With 1/2 inch plus or minus 1/32 inch side clearance, a 1-13/16 inch slide height, and ball bearing operation, these 8414 Series slides help support stable, repeatable motion for pull-out work surfaces. Selecting the 8414P 16 model lets projects use a documented Knape and Vogt configuration that is described for locking and maintaining work surfaces in the extended open position.