Clip-On 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 5mm

Salice Hinge Mounting Plate For Adjustable Fit

Salice hinge mounting plate BAR4R39/16 is a die-cast steel hinge mounting plate with nickel plating, so the plate provides a solid base while resisting corrosion in typical cabinet environments. As a clip-on 2-cam adjustable wing mounting plate, it works with clip-on Salice hinges and allows cam-based fine tuning, which helps dial in door alignment after the hinges are set. Being part of the hinge mounting plates class, it serves as the interface between cabinet side and hinge arm, giving you a repeatable reference point across multiple doors. The lifetime warranty backs this mounting plate for long-term cabinet use, which supports repeat service work without changing your hardware choice. Sold in both broken and full box quantities, it fits small jobs and larger runs, while a discount on full box orders supports cost control on production projects.

Key Mounting Plate Details That Help Jobs

• This premium two cam adjustable hinge mounting plate is compatible with all Salice hinges, so one plate style can serve a range of Salice hinge installations in the same shop or job.
• Construction in die-cast steel with nickel plating resists corrosion, helping maintain smooth hinge function and a consistent appearance over years of cabinet use.
• Two cam adjustment provides cam height adjustment of plus or minus 2 mm, so you can correct reveal differences vertically without remounting the plate.
• Cam depth adjustment from -0.5 mm to +2.8 mm lets you move the door in or out at the hinge, which helps flush doors to the cabinet face and reduce racking.
• The cabinet side fastening method uses screw-in expanding 5 mm dowels, giving a tight, repeatable fit in 5 mm system holes that suits cabinet production layouts.
• A lifetime warranty on this Salice America mounting plate supports long-term service work, because the same part number can be used confidently on future adjustments or replacements.

5mm Dowel Mounting Plate Installation Details

This hinge mounting plate uses screw-in expanding 5 mm dowels for the cabinet side fastening method, so it seats securely in standard 5 mm system holes without relying only on wood thread bite. The expanding dowels tighten as they are screwed, which helps lock the plate in place and maintain consistent positioning under door load. As a screw-on style plate, it is designed to be mechanically fastened, giving a solid connection between cabinet side and plate that supports repeated cam adjustments. When used with all Salice hinges, the consistent dowel layout and fastening style help keep drilling patterns uniform across cabinets, which streamlines production and field installation workflows.

Using This Salice Plate In Real Cabinet Work

Where This Clip-On Hinge Plate Is Applied

This clip-on 2-cam adjustable wing mounting plate is used wherever Salice hinges are installed and a precise mounting interface is needed between hinge arm and cabinet side, such as frameless cabinet runs that rely on system holes. Being compatible with all Salice hinges, it supports mixing different Salice hinge models on the same project while holding a common mounting reference, which simplifies layout. The 3 mm specification from the SAP description ties into its functional height in the hinge stack, so door positioning follows Salice drilling patterns tied to that plate height. In production shops working in batches, using the same die-cast steel, nickel-plated plate across jobs gives a consistent datum for jig settings, which supports faster setup and fewer alignment issues.

Adjustment And Results From The Two Cams

The two cam system on this hinge mounting plate provides cam height adjustment of plus or minus 2 mm, letting you move the door up or down at the plate instead of redrilling, which speeds up final fitting. Cam depth adjustment from -0.5 mm to +2.8 mm allows controlled in-and-out movement at the hinge side, which helps align door faces in a run so gaps look uniform. Because the plate is die-cast steel with nickel plating, the cams operate against a rigid, corrosion-resistant body, so the adjustments remain consistent over time. When combined with screw-in expanding 5 mm dowels, the adjusted position is supported by a tight cabinet-side connection, which helps prevent door sag that could otherwise undo fine cam settings.

Common Questions About This Salice Hinge Plate

Choose This Plate For Salice Hinge Projects

This Salice America hinge mounting plate combines die-cast steel strength, nickel-plated corrosion resistance, and two cam adjustability, giving solid control over door position. With compatibility across all Salice hinges and screw-in expanding 5 mm dowels, it supports both shop production and on-site work. The lifetime warranty and availability in both broken and full box quantities let you match order size to the job while keeping one dependable part number in your hardware lineup.