
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice hinge mounting plate describes a clip-on 2-cam adjustable wing mounting plate from Salice America, so it serves as the interface between the cabinet side and compatible Salice hinges for dependable door positioning in cabinet builds and repairs. The plate is part of the hinge mounting plates class, which keeps hinge layout modular and allows consistent setups across multiple cabinet runs in a shop. Die-cast steel construction gives this plate a solid metal body, supporting long-term use in typical woodworking environments where hinges see repeated cycles. A nickel-plated finish resists corrosion on the plate surface, helping maintain smooth adjustment points over time in standard interior cabinet conditions. The 2mm plate height defines the reference distance from the cabinet mounting surface, which matters when matching other plates in a job for uniform reveals.
This hinge mounting plate fastens on the cabinet side using screw-in expanding 5 mm dowels, which are designed to expand into 5 mm bores so the plate seats firmly against the panel during installation. The Expando dowel style creates a secure hold in the cabinet side, supporting consistent hinge performance when doors are cycled. Two cam adjustment on the plate provides plus or minus 2 mm of cam height movement and cam depth movement from -0.5 mm to +2.8 mm, letting the installer shift the door position vertically and in depth relative to the cabinet face. This combination of height and depth ranges allows precise tuning of reveals and door-to-cabinet clearance when working with Salice hinges.
The manufacturer part number BAR4R29/16 identifies this clip-on 2mm hinge mounting plate, helping match it precisely when repeating a proven Salice setup across multiple cabinet jobs or when replacing an existing plate in service work. As a hinge mounting plate in the hinges and hinge base plates category, it serves as the cabinet-side base for compatible Salice hinges, giving a fixed 2mm mounting offset that keeps reveals consistent when the same plate is used throughout a run. The wing-style plate body spreads mounting points across the cabinet side, supporting stable hinge anchoring on standard cabinet constructions. Because the fastening method uses screw-in expanding 5 mm dowels, this plate suits cabinet sides drilled with 5 mm holes, tying into common European construction practices in shops using line boring or CNC drilling.
The two cam design on this hinge mounting plate provides cam height adjustment of plus or minus 2 mm at the plate, so the door can be moved up or down relative to the cabinet without shifting the cabinet drilling pattern. The same 2-cam system delivers cam depth adjustment from -0.5 mm to +2.8 mm, allowing the door to move closer to or further from the cabinet face to fine-tune gaps and flushness. This dual-range adjustment at the plate, combined with the clip-on hinge connection, allows installers to dial in reveals and alignment by turning the cams rather than redrilling or repositioning components. The nickel-plated die-cast steel body supports these adjustments by providing a stable, corrosion-resistant base, helping the cams operate smoothly over time. Because the plate is described as compatible with all Salice hinges, a shop can standardize on this part for many hinge styles while retaining the same familiar adjustment behavior.
The BAR4R29/16 plate is a clip-on 2-cam adjustable wing hinge mounting plate, so it provides the cabinet-side base that supports compatible Salice hinges during cabinet construction or repair.
This hinge mounting plate uses screw-in expanding 5 mm dowels that expand inside 5 mm bores in the cabinet side, creating a secure, tight fit that holds the plate firmly during door operation.
The two cams on this plate provide cam height adjustment of plus or minus 2 mm and cam depth adjustment from -0.5 mm to +2.8 mm, allowing vertical and depth tuning of cabinet doors.
The 2mm plate height defines the offset between the cabinet side and hinge, so using the same height across a job keeps door reveals consistent from cabinet to cabinet.
This hinge mounting plate is constructed of die-cast steel with a nickel-plated finish, providing a solid metal base with corrosion-resistant plating for typical interior cabinet environments.
This mounting plate is described as compatible with all Salice hinges, so it can support various Salice hinge models while keeping one plate style in the shop.
This Salice hinge mounting plate from Wurth Baer Supply combines a 2mm plate height, Expando screw-in expanding 5 mm dowels, and two cam adjustments, giving cabinet professionals a repeatable base for aligning doors. The die-cast steel, nickel-plated construction supports long-term cam function in typical cabinet environments. For projects standardized on Salice hinges, using this clip-on 2-cam plate helps keep drilling, mounting, and adjustment behavior consistent from job to job.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UBBAR4R6916 Mfr# BAR4R69/16 | Domi 2-Way Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 6mm | ||||
Sold in: 1 Each | UBBAR4R0916 Mfr# BAR4R09/16 | Domi 2-Way Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 0mm | ||||
Sold in: 1 Each | UBBAR4R3916 Mfr# BAR4R39/16 | Clip-On 2-Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 5mm |