Domi 2-Way Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 6mm

Domi 2-Way Cam Adjustable Wing Mounting Plate Use

Domi 2-Way Cam Adjustable Wing Mounting Plate defines this Salice America hinge mounting plate as a die-cast steel solution that supports precise hinge positioning, which helps installers dial in consistent cabinet door gaps on demanding jobs. The 6mm mounting plate height sets the hinge relationship to the cabinet side, giving a known reference plane that supports repeatable layouts across multiple openings. Nickel plating over the die-cast steel provides resistance to corrosion, so the plate maintains appearance and function in typical cabinet environments over long-term service. Being part of the hinge mounting plates product class means this component forms the interface between Salice hinges and the cabinet, allowing you to tailor hinge locations to your construction method. Positioning this plate correctly lets the hinge do its job smoothly, giving doors controlled motion that matches the rest of the hardware on the project.

Key Mounting Plate Details For Cabinet Projects

• This hinge mounting plate is compatible with all Salice hinges, so it supports a unified hinge program across a shop and simplifies hardware selection on mixed cabinet runs.
• Die-cast steel construction gives the plate a solid body for the cams and hinge connection, creating a stable base that supports door alignment over repeated adjustments.
• Nickel plating over the steel helps resist corrosion in normal cabinet environments, preserving both function and appearance where humidity or cleaning can be present.
• The 6mm plate height establishes a consistent mounting level relative to the cabinet side, which aids in maintaining the same reveal from opening to opening on a run.
• This plate belongs to the hinges and hinge base plates category, so it integrates as a core part of the Salice hinge system rather than as a stand-alone component.

Mounting And Cam Adjustment Details For Installers

The cabinet side fastening method uses screw-in expanding 5 mm dowels, which let the plate anchor into 5 mm holes while expanding for a tight fit that supports accurate hinge positioning. Two cam adjustment on the plate provides cam height adjustment of plus or minus 2 mm, giving vertical tuning of the hinge location that can correct door sag or minor drilling variances within that range. The same two cam system provides cam depth adjustment from -0.5 mm to +2.8 mm, allowing controlled in-and-out movement of the door relative to the cabinet front to refine overlays or flush conditions. Because these cams are built into the plate, fine-tuning can be done at the cabinet after hanging doors, reducing time spent re-drilling or shifting base hole locations once the casework is assembled.

Why This Salice Hinge Mounting Plate Matters

Where This Hinge Mounting Plate Is Applied

This hinge mounting plate is designed as a wing mounting plate for Salice hinges, so it sits on the cabinet side and provides the fixed partner to the hinge arm in typical cabinet constructions. Being compatible with all Salice hinges means the same plate style can support different Salice hinge models on a project, which is useful when combining standard doors with special applications while keeping the mounting interface consistent. The 6mm plate height lets you build layouts around that dimension, since the door geometry will reference back to that fixed offset from the cabinet side, helping casework designers standardize boring patterns across multiple box sizes. In cabinet shops that rely on 5 mm system holes, the screw-in expanding 5 mm dowels tie directly into those holes, allowing the plate to be located off line-bored patterns that are already part of the production flow. This relationship between plate, hinge, and cabinet side turns the mounting plate into a predictable part of the hardware stack, supporting efficient planning from design through to final fit on site.

How Two-Way Cam Adjustment Supports Precise Results

The two cam adjustable design provides both height and depth cam adjustment, giving installers two independent ways to refine door fit once the plate is fastened to the cabinet. Cam height adjustment of plus or minus 2 mm lets you move the hinge connection up or down without shifting the mounting holes, which shortens the time needed to align doors across a bank after hanging. The cam depth range from -0.5 mm to +2.8 mm shifts the hinge position relative to the plate, enabling controlled front-to-back movement of the door that can correct minor construction tolerances while staying within the engineered adjustment window. Having these adjustments in the plate rather than only in the hinge arm spreads the tuning across components, which is useful when working with tight reveals where small changes at multiple points combine to achieve the final alignment. Because the plate is die-cast steel, the cams operate within a rigid body, supporting repeatable small movements without the base distorting as adjustments are made. When used across multiple cabinets, this consistent adjustment behavior helps maintain uniform reveals, reducing rework and callbacks once the installation is complete.

Common Questions About This Salice Mounting Plate

Selecting This Plate For Salice Hinge Projects

This die-cast steel, nickel-plated hinge mounting plate with 6mm height, two cam adjustment, and screw-in expanding 5 mm dowels gives cabinet shops a standardized interface for all Salice hinges. When a project calls for controlled adjustment and a consistent mounting reference, this Domi 2-way cam adjustable wing mounting plate supports that goal. For jobs built around Salice hardware, choosing this plate helps align design, boring patterns, and on-site fitting into a single, predictable hinge mounting approach.