Domi 2-Way Cam Adjustable Wing Mounting Plate, Nickel-Plated, Screw-On, 0mm

Domi 2-Way Cam Adjustable Wing Mounting Plate Use

Domi 2-Way Cam Adjustable Wing Mounting Plate identifies this Salice America hinge mounting plate as a two-cam adjustable wing base, so it handles precise door alignment where a separate hinge arm connects to the cabinet. The 0mm plate height keeps the door position referenced closely to the cabinet side, which is useful when the hinge geometry is already set for a zero-height base. Being part of the Hinge Mounting Plates class means it serves as the interface between the cabinet and compatible Salice hinges, so hinge arms lock to a consistent datum. The web description states that these two cam adjustable hinge mounting plates are compatible with all Salice hinges, which lets one plate style work across a range of Salice hinge models on a job. The wing style layout gives a broad footprint on the cabinet side, spreading load across the surface for stable support in everyday door use.

Key Mounting Plate Details For Cabinet Work

• The product is constructed of die-cast steel, which provides a rigid base for the hinge connection so doors stay aligned under regular opening and closing loads.
• The nickel plating is described as resisting corrosion, so the plate keeps its surface and function in typical cabinet environments where humidity or cleaning can reach the hardware.
• Two cam adjustment provides cam height adjustment of plus or minus 2 mm, giving vertical fine-tuning at the plate so reveals around the door can be aligned after the hinges are installed.
• The same two cam system provides cam depth adjustment of minus 0.5 mm to plus 2.8 mm, allowing the door-to-cabinet gap to be tuned at the plate without repositioning the cabinet drilling pattern.
• The cabinet side fastening method is screw-in expanding 5 mm dowels, which lock into 5 mm holes in the cabinet side so the plate seats firmly without shifting during hinge adjustment.

Mounting And Adjustment Details For Installers

The cabinet side fastening method is described as screw-in expanding 5 mm dowels, which means the plate is drawn tight into 5 mm bore holes as the dowels are screwed, anchoring the base securely to the side panel. That dowel approach supports efficient line-boring layouts, because the same 5 mm pattern can be repeated across runs of cabinets. The two cam system offers cam height adjustment of plus or minus 2 mm at the plate, so vertical door alignment can be set by turning the cams rather than redrilling holes. The cams also provide depth adjustment from minus 0.5 mm to plus 2.8 mm, letting the installer bring the door closer to or farther from the cabinet front to dial in consistent gaps along a bank of doors.

How This Salice Hinge Mounting Plate Works

Where This 0mm Salice Mounting Plate Fits

The SAP description identifies this part as DIECST MGT PLT, KNOCK-IN, 0MM, 2 CAM, which ties directly to its role as a die-cast mounting plate with two cam adjustments and a 0mm height reference. The product name adds that it is a Domi 2-Way Cam Adjustable Wing Mounting Plate, so it functions as a wing-style base plate in a Domi-style Salice hinge system. The web description states that these two cam adjustable hinge mounting plates are compatible with all Salice hinges, allowing the same base plate to be used across different Salice hinge models specified on a cabinet run. Being in the Hinge Mounting Plates category shows that it is designed to sit between the cabinet side and the hinge arm, defining how the hinge geometry references the cabinet. The 0mm height specification means the plate does not raise the hinge arm off the cabinet surface, which is important when the hinge cup drilling and arm choice are based on a zero-height plate for proper overlay or inset relationships.

Why Two-Cam Adjustment Supports Consistent Results

The web description notes that two cam adjustment provides cam height adjustment of plus or minus 2 mm, giving an installer or shop finisher a 4 mm vertical window to correct minor drilling variance or door warp without altering the cabinet. This same two cam system is also specified with cam depth adjustment of minus 0.5 mm to plus 2.8 mm, which allows the door-to-face alignment to be tailored by turning the cams until the front sits where it needs to be. Constructed of die-cast steel with nickel plating to resist corrosion, the plate keeps both strength and surface protection as these adjustments are made and maintained over time. The cabinet side fastening method is screw-in expanding 5 mm dowels, so once the plate is anchored in 5 mm bored holes, the cams can be adjusted without the base creeping on the panel. The presence of a lifetime warranty in the description indicates that the manufacturer stands behind this hinge mounting plate over the life of the installation, adding confidence when it is specified for multiple projects or long service applications.

Common Questions About This Salice Mounting Plate

Choose This Plate For Adjustable Salice Hinge Runs

The web description notes that these premium two cam adjustable hinge mounting plates are compatible with all Salice hinges, so one part number can support multiple Salice hinge selections on a project. The die-cast steel construction with nickel plating to resist corrosion provides a solid, protected base for long-term hinge operation. Two cam adjustment with specified height and depth ranges lets you dial in door alignment directly at the plate. With a cabinet side fastening method of screw-in expanding 5 mm dowels and a 0mm height reference, this Salice America plate offers a consistent setup for repeatable cabinet runs.