Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt PSF sink tip out tray identifies this unit as part of KV's line of plastic sink tip-out trays, so it is designed to turn a fixed sink false front into shallow, usable storage. The PSF11-W model is described as an 11 inch long, 2 inch deep, 3 inch high sink tip-out tray, so it fits typical narrow sink cabinet openings where a shallow recess is needed rather than full drawers. The tray is made from plastic, which keeps moisture-sensitive items off the cabinet surface and supports use in normal sink environments. This PSF11-W tray is part of the PSF Series, which offers Slim 1-5/8 inch and Standard 2 inch depths, giving flexibility when matching tray profile to available space behind the false front. The white color provides a clean look that blends with many light interiors and helps small items stand out visually.
The PSF11-W tray description as a sink tip-out tray ties it directly to mounting behind a sink false front, so it is suited to that hinged-forward motion rather than drawer slide travel. With its 11 inch length, the tray aligns naturally between two sink tip-out hinges, allowing a centered storage space behind the panel. The 2 inch Standard depth gives room for common slim items behind the false front while preserving clearance around typical sink basins and supply lines. The 3 inch height pairs with many cabinet rail dimensions, helping the front lip sit comfortably within the opening when the panel is closed. The note that sink tip-out hinges are sold separately shows that the tray works with dedicated hinge hardware in the same general product group.
The PSF11-W is identified as an 11 inch long, 2 inch deep, 3 inch high plastic sink tip-out tray, so it fits best in compact sink base cabinets where the false front span is close to that 11 inch width. Being part of Knape and Vogt's line of plastic sink tip-out trays places it in kitchen and bath cabinet layouts that rely on a tilt-forward motion for access, which is common in residential sink bases. The 2 inch Standard depth lets the tray occupy the shallow zone between the back of the false front and the sink or reinforcement rails, so it takes advantage of space that otherwise stays unused. Its 3 inch height allows the tray wall to rise behind the panel opening, helping keep contents against the tray and away from the hinge path during tipping.
The PSF Series is described as available in Slim 1-5/8 inch and Standard 2 inch depths, across widths from 8-5/8 inch to 30-1/4 inch, which means the PSF11-W shares geometry with matching trays in longer or shorter spans. That consistency lets a shop repeat the same drilling patterns and front layout across several cabinet sizes while changing only the tray length. The white finish mentioned in the series description supports use in lighter interior schemes where installers want the tray color to align with common white cabinet interiors or other white Knape and Vogt fittings.
KV's note that this product is part of a line of plastic sink tip-out trays and hinges means the PSF11-W is built around a defined system, so dimensions like the 2 inch Standard depth are consistent from one cabinet to the next. That consistency lets a shop set up jigs or CNC programs around PSF Series geometry and then rely on the 11 inch version dropping into the same workflow, supporting predictable clearances behind the false front. The available Slim 1-5/8 inch and Standard 2 inch depths within the same family give designers a clear choice between minimal projection and slightly larger capacity while keeping hinge relationships familiar.
The series range from 8-5/8 inch to 30-1/4 inch widths places the PSF11-W toward the smaller end of the catalog, so it becomes a practical option when dealing with narrow sink cabinets or divided front panels. Because sink tip-out hinges are identified separately within the same line, the PSF11-W can be planned as the tray component in a coordinated tip-out assembly, making it simpler to assign tray sizes to specific openings in a run of cabinets. The use of plastic construction across KV's line supports use in typical kitchen and bath sink environments, where trays are expected to contact damp items without affecting the cabinet structure beneath.
The PSF11-W sink tip-out tray is identified as 11 inches long, 2 inches deep, and 3 inches high, so it suits shallow storage behind a sink false front in that approximate opening width.
The 2 inch Standard depth matches the PSF Series Standard profile, giving enough room for small items while staying shallow enough to clear typical sink bowls and bracing behind the false front.
The PSF11-W is part of KV's line of plastic sink tip-out trays, so its plastic construction suits normal kitchen or bath sink environments where occasional moisture contact is expected.
Series information lists White and Almond options, and the PSF11-W designation specifies the white version, which coordinates with many light cabinet interiors and other white components.
The PSF11-W is described as a sink tip-out tray, so it is typically mounted behind a sink false front panel to provide shallow storage accessed by tipping the front outward.
The PSF Series spans 8-5/8 inch to 30-1/4 inch widths, so the PSF11-W fits into a coordinated size family that lets shops match tray lengths to different cabinet openings.
The PSF11-W sink tip-out tray combines an 11 inch length with a 2 inch Standard depth and 3 inch height, so it addresses typical narrow sink false fronts needing shallow, organized storage. Its role within Knape and Vogt's PSF Series means the geometry is coordinated with other Slim and Standard depth trays from 8-5/8 inch to 30-1/4 inch wide, supporting repeatable layouts across a full cabinet run. Selecting this white plastic model aligns the tray with common interior finishes while taking advantage of a system built specifically for sink tip-out applications.
Sold In: 1 Each
