Plastic shelf supports provide a simple way to hold cabinet or storage shelves in place when the cabinet side panels are drilled for support pins. This Rev-A-Shelf shelf supports product is a plastic locking shelf support clip made for 1/4 inch bores and sold in a 1000 pack. The clear shelf supports finish helps the clip stay less visible in many cabinet interiors. These plastic locking shelf support clips are described for use with 1/2 inch, 5/8 inch, and 3/4 inch shelves, and the shelf rest area measures 1/2 inch long by 3/4 inch wide. For buyers replacing worn 1/4 shelf support clips or planning larger production runs, this pack is aimed at full box quantity purchasing.
Key specs to confirm: This Rev-A-Shelf plastic shelf support clip is identified for a 1/4 inch bore and is described for 1/2 inch, 5/8 inch, and 3/4 inch shelves. The shelf rest area is 1/2 inch long by 3/4 inch wide, and the finish is clear. Buyers should confirm the cabinet hole diameter, shelf thickness, and whether a locking clip style matches the cabinet design. The product name also references 5mm and 1/4 inch bores, so buyers should verify the exact bore requirement for their application before purchase. Load rating, compliance, and any safety-related limits are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified included quantity is one full box of 1000 plastic locking shelf support clips. No other components are confirmed in the provided product data.
What to verify before ordering: Confirm your bore size, shelf thickness, required finish, and whether you need locking shelf supports rather than standard shelf pins. Also confirm that full box quantity purchasing fits your job scope and inventory plan.
When a cabinet shelf starts shifting, tilting, or lifting off a basic support pin, buyers often look for a replacement part that matches the existing hole pattern and shelf thickness without changing the cabinet box. Locking shelf support clips are commonly considered in those situations because the buyer is not just replacing a missing pin. The buyer is trying to restore shelf position in a way that better matches the original hardware style.
This Rev-A-Shelf shelf supports item fits that kind of repair and production use when the cabinet side uses a 1/4 inch bore and the shelf falls within the listed 1/2 inch, 5/8 inch, or 3/4 inch thickness range. The clear plastic body is useful when the support should stay less noticeable inside a finished cabinet, closet panel, or utility storage unit. For installers replacing 1/4 shelf support clips across multiple units, the 1000 pack format also makes sense for shop stock, route trucks, and repeated service calls.
Buyers searching for shelf supports for 1/4 bore or shelf supports for 5/8 shelves usually need more than a generic pin. They need to confirm fit at three points: the cabinet hole size, the shelf thickness, and the support contact area. Here, the verified shelf rest area is 1/2 inch long by 3/4 inch wide, which gives a measurable reference when comparing against the shelf edge and cabinet interior clearance. If your project references 5mm shelf supports, confirm whether the cabinet drilling is truly 5mm or 1/4 inch before ordering, because the product naming and description reference both dimensions and exact interchangeability is not stated in the verified data.
This product is also useful for new cabinet construction or fixture assembly where a buyer wants a consistent bulk quantity of Rev-A-Shelf plastic shelf supports. Because it is sold in full box quantities only, it is especially practical for woodworking shops, closet fabricators, and maintenance teams that standardize parts across many cabinets. If your job requires load data, special compliance details, or a confirmed installation method for a specific cabinet material, those details should be checked in manufacturer documentation before final purchase.
When comparing plastic shelf supports, the most important difference is usually not appearance. It is fit. Buyers should compare bore size, supported shelf thickness, support style, and the visible footprint inside the cabinet. A locking clip style is different from a plain shelf pin because the buyer is selecting a support intended for a more controlled shelf hold. That matters in repair work where the original shelf hardware was designed to do more than simply rest under the panel.
Clear shelf supports can also be preferable when a visible support should blend into lighter or finished interiors. In other settings, buyers may prefer white, but this specific item is verified as clear. The Rev-A-Shelf brand identification helps buyers keep part selection consistent when matching existing hardware or standardizing purchasing across repeated cabinet builds.
Another practical comparison point is pack size. Some shelf support products are suited to one-off household replacement, while this item is verified as a 1000 pack sold in full box quantities only. That makes it a better match for trade buyers, production environments, and planned maintenance stock. Before ordering, compare your required bore size and shelf thickness first, then confirm whether a locking shelf support clip is the right hardware type for your cabinet design.
This shelf support is verified for a 1/4 inch bore. Buyers should confirm cabinet hole size before ordering.
This locking shelf support clip is described for 1/2 inch, 5/8 inch, and 3/4 inch shelves.
This Rev-A-Shelf product is a plastic locking shelf support clip, not a plain non-locking shelf pin.
These clear shelf supports are verified as clear in the product data.
This product is sold as a 1000 pack and is listed for full box quantities only.
The shelf rest area is verified as 1/2 inch long by 3/4 inch wide.
This product name references 5mm and 1/4 inch bores, so buyers should confirm the exact cabinet hole size in manufacturer documentation before purchase.
Load ratings and compliance details are not provided in the verified data. Follow manufacturer installation guidance and local building requirements where applicable.
The verified data confirms the 1000 pack of shelf supports. Other included items are not specified and should be confirmed before ordering.
Plastic shelf supports are a practical choice when you need a clear locking clip for cabinets or storage units drilled for a 1/4 inch bore. This Rev-A-Shelf item is sold as a 1000 pack and is described for 1/2 inch, 5/8 inch, and 3/4 inch shelves with a 1/2 inch by 3/4 inch rest area. Before purchase, confirm bore size, shelf thickness, and that a locking clip style matches your cabinet design. Also verify whether any unlisted accessories, load details, or technical requirements apply to your installation.
Sold In: 1000 Each
