Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Plastic shelf supports provide a simple way to support cabinet, closet, and storage shelves where a locking clip style is needed. This Rev-A-Shelf Corporation product is a plastic shelf locking support clip designed for 5mm and 1/4 inch bores, with the listed item configured as clear shelf supports in a full box quantity. The product name identifies these as Rev-A-Shelf shelf supports for 5mm bores, and the web description states they are used with 1/2 inch, 5/8 inch, and 3/4 inch shelves. Buyers looking for shelf support clips or plastic locking shelf supports can use this item when the bore size, shelf thickness, and finish match the job. The shelf rest area is listed as 1/2 inch long by 3/4 inch wide, which helps when checking shelf contact area before ordering.
Key specs to confirm: Plastic shelf supports like this item must match the bore size in the cabinet side, the shelf thickness, and the finish needed for the project. This Rev-A-Shelf shelf support is identified for 5mm and 1/4 inch bores, and the web description states compatibility with 1/2 inch, 5/8 inch, and 3/4 inch shelves. The shelf rest area is listed as 1/2 inch long by 3/4 inch wide. Before purchase, confirm whether your casework is drilled for 5mm or 1/4 inch supports and whether the locking style matches your existing hardware. Load rating, compliance details, and any application limits are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: This listing is for plastic locking shelf support clips in clear, sold in a 1000 pack full box quantity. Included accessories or extra hardware are not specified in the verified data.
What to verify before ordering: Check bore size, shelf thickness, required finish, locking clip style, and whether your job calls for a full box quantity. Confirm that the shelf edge and cabinet drilling pattern match the support design before ordering replacement or new install hardware.
Locking shelf support clips are often chosen when a buyer wants a shelf support that does more than simply rest under the panel. In cabinet shops, closet builds, and garage organization work, the usual concern is fit. A support may look similar to another clip, but the wrong bore size or the wrong shelf thickness range can slow installation and create rework. That is why product identity matters. This item is a Rev-A-Shelf Corporation plastic locking shelf support clip for 5mm and 1/4 inch bores, and the verified web description states use with 1/2 inch, 5/8 inch, and 3/4 inch shelves.
For a buyer replacing damaged hardware, the most useful checks are straightforward. Measure the cabinet side hole first. Then confirm the shelf thickness and compare the visible finish if appearance matters. Buyers searching for 5mm shelf supports or shelf supports for 1/2 shelves usually need an exact fit rather than a close substitute. The listed shelf rest area of 1/2 inch by 3/4 inch is also worth checking when the shelf edge profile or support contact area matters.
This item can also make sense for production environments because it is sold in full box quantities only and listed as a 1000 pack. That format may suit shops, installers, and maintenance teams that keep clear shelf supports on hand for repeated cabinet work. If you are ordering for a one-time repair, verify that the box quantity aligns with your purchasing needs. If you are ordering for a larger run, confirm that the locking style matches the cabinet line or shelving system already in use. Where load requirements or special project conditions apply, those details are not provided here, so they should be checked with manufacturer guidance before installation. Follow manufacturer installation guidance and local building requirements where applicable.
When buyers compare plastic shelf supports, the most important differences are usually not cosmetic. Bore size, shelf thickness range, support contact area, and pack quantity often matter more than general appearance. A locking shelf support clip must align with the hole size in the case side and the shelf it is meant to hold. This Rev-A-Shelf shelf support gives several verified fit points: 5mm and 1/4 inch bore compatibility, use with 1/2 inch, 5/8 inch, and 3/4 inch shelves, and a shelf rest area measuring 1/2 inch long by 3/4 inch wide.
That kind of information helps buyers compare options on practical terms. If your project already uses clear shelf supports, the listed clear finish may help maintain a consistent look. If your shop buys in volume, the full box quantity and 1000 pack format may fit stocking needs better than smaller packs. If your project needs a different finish, a different bore size, or a different shelf support style, those details should be checked before purchase rather than assumed from a similar-looking clip.
Brand also matters when matching replacement parts. Rev-A-Shelf Corporation shelf supports give a specific manufacturer reference that can help buyers align with prior installs or approved shop hardware lists. For professional buyers and serious DIY users, the safest comparison method is to match the bore, shelf thickness, support style, finish, and quantity required for the job. That approach reduces ordering mistakes and makes installation more predictable.
This plastic shelf support is listed for 5mm and 1/4 inch bores. Confirm your cabinet side hole size before ordering.
This locking shelf support clip is described for 1/2 inch, 5/8 inch, and 3/4 inch shelves.
This listed item is a clear plastic shelf support. The broader product description also mentions clear and white finishes.
The shelf rest area for this Rev-A-Shelf shelf support is listed as 1/2 inch long by 3/4 inch wide.
This product listing identifies a 1000 pack and states that it is sold in full box quantities only.
These shelf support clips can work as replacements when the bore size, shelf thickness, locking style, and finish match your existing hardware.
These plastic locking shelf supports will not fit every system. Confirm bore size, shelf thickness, and clip style before purchase.
Load rating information is not provided in the verified data. Confirm weight limits with the manufacturer or technical documentation.
This shelf support requires matching bore size, shelf thickness, and support style. Follow manufacturer installation guidance and local building requirements where applicable.
Plastic shelf supports are easiest to buy correctly when you confirm the bore size, shelf thickness, finish, and quantity before checkout. This Rev-A-Shelf Corporation item is a clear locking shelf support clip for 5mm and 1/4 inch bores, described for 1/2 inch, 5/8 inch, and 3/4 inch shelves, and sold as a full box 1000 pack. Review what is included, match the clip style to your cabinet or closet system, and verify any load or application limits with manufacturer documentation before purchase.
Sold In: 1000 Each
