Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
plastic locking shelf clip provides a simple way to support and retain cabinet or closet shelving that uses a 5mm bore. This Rev-A-Shelf shelf clip is a plastic shelf support made for 3/4 shelf clip applications and is supplied in a white finish. The product is described as a locking shelf support clip, which helps buyers looking for a plastic shelf rest that stays positioned in drilled side-panel holes. Rev-A-Shelf shelf supports in this style are available for 1/2, 5/8 and 3/4 shelves, and this specific version is identified for 3/4 inch shelves. The shelf rest area is listed as 1/2 inch long by 3/4 inch wide. This item is sold in full box quantities only, with a 1000 pack configuration shown in the verified product data.
Key specs to confirm: This 5mm shelf support is identified as a plastic locking shelf clip for 3/4 inch shelves with a white finish. Verify that your cabinet, closet, or garage organization panel uses a 5mm bore before ordering. Confirm your shelf thickness is 3/4 inch for this specific item. The verified shelf rest area is 1/2 inch long by 3/4 inch wide, so buyers should also check that this contact area suits the shelf edge and panel layout. If load capacity, material grade, or compliance details are required for your project, those details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified data identifies this item as a 1000 pack of white plastic locking shelf support clips sold in full box quantities only.
What to verify before ordering: Confirm 5mm hole size, 3/4 inch shelf thickness, white finish preference, required box quantity, and whether your application needs a locking shelf support rather than a standard non-locking shelf rest.
Buyers typically look for a shelf support clip when replacing missing hardware, setting up new cabinet interiors, or stocking parts for closet and garage organization work. In those cases, the main risk is ordering a clip that fits the wrong bore size or the wrong shelf thickness. This Rev-A-Shelf shelf clip addresses that issue by clearly identifying two important fit points in the verified data: a 5mm bore and use with 3/4 inch shelves.
That makes this item useful for installers, cabinet shops, and maintenance teams that need a white shelf support clip for drilled side panels. The locking style can also matter in day-to-day use. A shelf locking support clip is often chosen when the buyer wants the clip to stay seated in the panel while positioning the shelf. For replacement work, the white finish helps when matching visible shelf hardware in light-colored interiors.
The verified web description also notes that this product family is available for 1/2 inch, 5/8 inch, and 3/4 inch shelves. That is helpful when a buyer is standardizing hardware across several casework sizes, but it also means the shelf thickness must be checked carefully so the correct version is ordered. If your project includes mixed shelf thicknesses, confirm which cabinet sections use 3/4 inch material before purchase.
For production environments, the 1000 pack format supports bulk purchasing and repeat installs. For smaller jobs, buyers should note that this item is sold in full box quantities only. If your project needs only a few clips, confirm whether the box count aligns with your purchasing plan. If shelf load, exact locking geometry, or detailed installation instructions are important to your application, those details should be reviewed in manufacturer documentation before final approval.
When comparing shelf support options, buyers usually focus on four points: bore size, shelf thickness, finish, and whether the clip uses a locking design. This Rev-A-Shelf shelf supports item gives clear verified information in each of those areas except performance rating. It is a plastic shelf rest style clip, it fits a 5mm bore, it is intended for 3/4 inch shelves, and it comes in white.
That combination helps narrow fit without relying on assumptions. A generic shelf clip may look similar in photos, but if the bore size or shelf thickness is off, installation can be loose, tight, or unsuitable. The listed shelf rest area of 1/2 inch long by 3/4 inch wide also gives buyers another reference point when checking how the clip will sit under the shelf edge.
Brand identification matters for replacement and repeat ordering as well. A Rev-A-Shelf shelf clip gives buyers a clear manufacturer reference when matching prior orders, internal parts lists, or shop standards. For visible applications, the white finish can be a practical match for melamine, painted interiors, or closet systems where hardware appearance is noticeable. Before ordering, buyers should still verify panel hole size, shelf thickness, and total quantity needed, especially because this item is supplied as a full 1000 pack.
This plastic locking shelf clip is identified for 3/4 inch shelves. Buyers should confirm shelf thickness before ordering.
This 5mm shelf support is made for a 5mm bore. Check your cabinet or closet side panel hole size before purchase.
This Rev-A-Shelf shelf clip is described as a plastic locking shelf support clip.
This white shelf support clip has a white finish for light cabinet, closet, or storage interiors.
This shelf support is listed in shelf, closet and garage organization, but buyers should confirm panel bore size and shelf thickness for their system.
This plastic shelf rest has a verified support area of 1/2 inch long by 3/4 inch wide.
This Rev-A-Shelf shelf support item is identified as a 1000 pack and sold in full box quantities only.
This shelf locking support clip listing does not provide a load rating. Confirm capacity with the manufacturer or technical documentation.
This shelf support clip should be matched to 5mm bores, 3/4 inch shelves, and the correct quantity. Follow manufacturer installation guidance and local building requirements where applicable.
white shelf support clip is easiest to buy correctly when you confirm the three main fit points first: 5mm bore, 3/4 inch shelf thickness, and the need for a locking plastic shelf support. This Rev-A-Shelf shelf clip is sold as a 1000 pack in a white finish, with a verified shelf rest area of 1/2 inch long by 3/4 inch wide. Before purchase, make sure your project calls for full box quantity, verify the panel drilling, and confirm that a locking shelf support clip matches your cabinet or closet hardware layout.
Sold In: 1000 Each
