Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 18 inch drawer slides provide a full extension ball bearing solution that lets RV drawers open their full length, so contents are easy to reach during service or daily use. The side mount design fits standard cabinet construction where a drawer member rides on cabinet-mounted slides, giving predictable motion and support on each side. An unhanded configuration allows each slide to be used on either left or right, which simplifies layout when installing multiple drawers. The RV version of the 8400 Series builds in a heavy duty stay close feature with a self closing spring that holds the drawer in the shut position, so drawers are designed to remain closed during movement of the RV. A zinc finish on these slides provides a clean metal surface suitable for typical cabinet environments where metal hardware is exposed at the side of the drawer. The 8400BRV 18 model designation identifies this specific 18 inch length in the series.
These Knape and Vogt 8400BRV 18 slides specify a side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side, so drawers can be sized to that allowance for a consistent fit in the opening. The slide height of 1-13/16 inch defines how much vertical space the hardware occupies on the drawer side, which helps plan drawer box height and reveal lines in the cabinet. A 32 mm pattern is listed, providing hole spacing that works with systems laid out on 32 mm increments to streamline drilling and alignment in production or shop settings. The recommended fasteners are #7 x 5/8 inch Phillips pan head, giving a specific screw size and head style that matches the slide holes for secure mounting into cabinet sides and drawer members.
The KV Model 8400RV RV version with heavy duty stay close feature is designed for RVs, so it is suited to drawers in RV kitchens, baths, or storage bays where motion can work drawers open. The self closing spring is designed to keep the drawer in the shut position, so once the drawer is pushed closed it is held there by spring force during travel. The 18 inch length fits cabinet sections built around that slide travel, which works well in many mid-depth RV cabinets and galley layouts. The side mount drawer slide configuration matches cabinet designs that provide 1/2 inch plus 1/32 inch minus 0 inch side clearance per side, so drawer boxes can be sized and built to that standard for repeatable installations. The 1-13/16 inch slide height gives a known hardware profile, allowing builders to coordinate drawer side height so the slide sits properly within the case opening while maintaining clearances.
The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch each side gives a clear target when sizing drawer widths, which supports consistent fits across a run of cabinets using the same slide model. The 32 mm pattern works with cabinet systems that follow 32 mm line boring, allowing installers to use existing jigs or line-bored panels so slides register consistently front to back. The unhanded side mount design means a single slide type works on both left and right, so orientation is straightforward during assembly and reduces the chance of pulling the wrong part. The full extension ball bearing action allows drawers to extend completely while staying guided, supporting smooth travel even under typical drawer loads. The recommended #7 x 5/8 inch Phillips pan head fasteners match the slide hole design, so the head seats correctly against the steel and helps hold the slide firmly to wood cabinet sides or drawer members. A zinc finish on the slides provides a stable metal surface in common woodworking environments, aligning with other visible metal hardware in cabinet interiors.
The 8400BRV 18 designation and manufacturer part number 8400BRV 18 identify this specific 18 inch length in Knape and Vogts 8400 Series, helping match slides to design documents.
The heavy duty self closing spring is designed to keep the drawer in the shut position, so pushed-closed drawers remain shut during RV motion or vibration.
These side mount ball bearing slides specify 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, guiding drawer width sizing for a predictable fit in the opening.
The 32 mm pattern matches systems laid out on 32 mm increments, so line-bored cabinet sides or jigs using that spacing can position the slides consistently.
Knape and Vogt recommends #7 x 5/8 inch Phillips pan head fasteners, which are sized and headed to seat properly in the slides mounting holes.
The KV Model 8400RV RV version with heavy duty stay close feature is designed for RVs, matching RV drawer applications where movement could push drawers open.
The Knape and Vogt 18 inch drawer slides in the 8400BRV 18 RV version combine full extension travel, side mount ball bearing guidance, and a heavy duty stay close self closing spring designed to keep drawers shut in RV use. The specified 1/2 inch plus 1/32 inch minus 0 inch side clearance and 1-13/16 inch slide height provide clear sizing references when planning drawer boxes and openings. With a 32 mm pattern and recommended #7 x 5/8 inch Phillips pan head fasteners, these slides align with common cabinet construction methods. For RV drawer projects built around 18 inch full extension slides, this model offers defined dimensions and features that support consistent cabinet layouts.
Sold In: 10 Set
