Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 28 inch drawer slides in the 8400BRV 28 model provide a full extension ball bearing slide that lets a 28 inch drawer open its full travel, giving access to stored items along the entire drawer length. The side mount design positions the slides on the drawer sides, which suits cabinets laid out for side mount hardware in RV installations and similar casework. The unhanded configuration means the same slide works on either side, simplifying layout and reducing part sorting during installation. A heavy-duty self closing spring is designed to keep the drawer in the shut position, which helps drawers stay closed as an RV moves. The stay close feature is specifically described as an RV version, so it addresses movement and vibration in that environment. The zinc finish provides a standard metal surface that matches common drawer slide finishes in many woodworking and cabinet projects.
The 8400BRV 28 slide is described as a side mount model, so it fits cabinets built for slides fastened to the drawer sides and case sides. The specified side clearance of 1/2 inch plus or minus 1/32 inch each side defines the operating gap, guiding drawer box width so the ball bearings run correctly. The slide height of 1-13/16 inch helps determine drawer side height and vertical layout when stacking drawers. A 32 mm pattern is called out, which aligns fastener positions with 32 mm system holes on cabinet sides. Recommended fasteners are #7 x 5/8 inch Phillips pan head, which matches common cabinet construction materials where this slide will typically be attached.
The web description identifies this model as KV 8400RV, an RV version with a heavy duty stay close feature designed for RVs, so it is aimed at vehicle-based cabinetry where drawer movement must be controlled. The heavy-duty self closing spring is described as designed to keep the drawer in the shut position, which supports applications where vibration and motion are part of normal use. At 28 inch length and full extension, the slide serves deeper drawers often found in galley, storage, or utility cabinets, where full access is needed along the entire depth. Being unhanded means one model number covers both left and right mounting positions, which simplifies stocking for installers who service multiple cabinets in the same RV or similar mobile installation.
The specified side clearance of 1/2 inch plus or minus 1/32 inch each side gives a clear sizing target for drawer width relative to the opening, which supports consistent slide performance across a cabinet run. The 32 mm pattern allows the slide to align with pre-drilled 32 mm system holes, which speeds layout and helps maintain parallel alignment on production or shop-built cases. The full extension ball bearing design lets the drawer extend to its full 28 inch length, which improves access and reduces the need to reach into the cabinet for items at the back. The unhanded configuration means installers can pull from the same slide stock for either side, which can reduce installation time by removing left/right sorting steps.
The 8400BRV 28 is a Knape and Vogt 28 inch full extension ball bearing side mount drawer slide, so it supports long drawer travel and mounts to the drawer and cabinet sides.
The heavy-duty self closing spring is designed to keep the drawer in the shut position, which helps drawers remain closed during RV movement and vibration.
The 8400BRV 28 requires 1/2 inch side clearance plus or minus 1/32 inch on each side, which guides drawer box sizing relative to the cabinet opening.
The slide is specified with a 32 mm pattern, which aligns with 32 mm system drilling on cabinet sides for consistent, repeatable mounting positions.
The slide height is listed as 1-13/16 inch, which helps determine drawer side heights and vertical spacing when stacking multiple drawers.
Recommended fasteners for the 8400BRV 28 are #7 x 5/8 inch Phillips pan head, matching typical cabinet materials used with this type of side mount slide.
The Knape and Vogt 8400BRV 28 side mount drawer slides combine full extension, 28 inch length, and a heavy-duty stay close self closing spring designed for RVs, so they address long drawer access and movement control. The 1/2 inch plus or minus 1/32 inch side clearance and 1-13/16 inch height give clear layout dimensions when planning drawer boxes and cabinet openings. With a 32 mm pattern and recommended #7 x 5/8 inch Phillips pan head fasteners, the slides fit comfortably into 32 mm system casework and standard shop installation practices, supporting clean, repeatable drawer action on RV and similar cabinetry builds.
Sold In: 190 Set
