Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8400BRV 24 is a 24 inch full-extension side-mount ball bearing drawer slide from KV's 8400 series, rated 100 lb per pair, with a self-close spring that pulls the drawer fully shut and a hold-in anti-rebound detent that keeps it there. The zinc finish integrates cleanly into cabinet interiors where a classic metallic look is standard. This slide is sold in a bulk-pack, making it a practical choice for shops outfitting multiple cabinets at once.
In a busy kitchen, utility room, or shop cabinet, drawers do not always get pushed all the way closed. The self-close spring on this slide solves that by pulling the drawer the last inch home once it is pushed into the capture zone. That means no drawers left ajar, no soft bumping into half-open boxes while working, and a tidier cabinet overall. The hold-in anti-rebound detent adds a second layer: when someone closes the drawer firmly, the detent stops it from bouncing back open. The two mechanisms work together — the spring pulls, the detent holds. Note that this is a spring-close mechanism, not a soft-close damper; the drawer closes positively rather than slowly and silently.
The slide is built from cold-formed steel with a zinc electroplate finish. Zinc is the segment's workhorse finish: it protects the steel members against everyday indoor moisture and wear, and it sits unobtrusively beside an open drawer. The zinc tone pairs naturally with raw or painted cabinet interiors without competing for attention the way a black or white finish sometimes does. Ball bearings in full-length raceways handle the load smoothly across the full 24 inch travel range.
The bulk-pack format is aimed at shops and contractors who install slides in volume. The 8400BRV is non-handed and works in frameless cabinets out of the box; in face-frame cabinets, support at the rear of the slide is required — add the matching KV rear mounting brackets, sold separately, before the back end of the slide is left unsupported. The 1/2 inch side clearance is standard for this series: build the drawer box 1 inch narrower than the cabinet opening so each slide has its full clearance. KV rates the 8400 series for drawer widths up to 24 inches.
Self-close. An integrated spring pulls the drawer fully shut once pushed into the capture zone. There is no damper — the close is positive and spring-driven, not slow and cushioned. If you need damped closing, look at the KV FM soft-close series instead.
It keeps the drawer from bouncing back open after a firm close. The detent is a mechanical catch — it holds the drawer in the closed position until intentionally pulled, but it does not assist closing and it does not lock the drawer.
No. The 8400BRV is non-handed, so both slides in the pair are identical. Order the quantity your drawer count calls for without worrying about handedness.
Full extension means the entire drawer box clears the cabinet opening — the back of the drawer comes all the way out to the face. The slide's nominal length is 24 inches; actual travel tracks closely to that on a full-extension slide, but slide length and drawer travel are separate specs.
Yes. In face-frame construction the cabinet side is set back from the face frame, so the back of the slide needs a bracket for support. KV rear mounting brackets for the 8400 series are sold separately and are series-specific.
When the application calls for a drawer that pulls itself fully shut and stays there, the 8400BRV in zinc delivers both behaviors in a non-handed, full-extension, 100 lb-rated package that is straightforward to install and available in volume quantities for production work.
Sold In: 10 Set
