Berenson Andante 2-1/2" (64 mm) Center to Center Dull Bronze Cup Pull, 3009-1DBZ-P

Berenson Andante Cup Pull For Cabinet Projects

Berenson Andante cup pull defines this cabinet handle as part of the Berenson Andante Series, so it matches other pieces from the same collection on coordinated jobs. The dull bronze finish gives the pull a muted metal look, which suits projects needing a darker tone without high reflectivity. The zinc die cast material forms a solid pull body, providing a consistent shape that supports repeatable placement across multiple fronts. A center to center dimension of 2-1/2 inches, or 64 mm, sets the drilling pattern, helping layouts line up across doors and drawers. The overall length of 4-1/16 inches creates finger space across the pull, which matters when users open wider or heavier drawers. A projection of 1 inch sets how far the pull stands off the surface, affecting knuckle clearance and cleaning access. The 1-1/4 inch width defines its front face coverage on the cabinet.

Key Berenson Andante Cup Pull Details

• The Andante Series designation ties this cup pull to a defined Berenson collection, which helps when a project calls for consistent styling across multiple cabinet areas or follow-up replacements.
• The dull bronze finish applies a subdued metallic tone, which helps the pull visually blend with warm cabinet finishes and minimizes glare under task lighting along counters.
• The zinc die cast construction forms the pull as a single, solid component, which supports reliable handling during installation and helps maintain uniform dimensions from piece to piece.
• The 2-1/2 inch, or 64 mm, center to center dimension sets a standard mounting spread, which streamlines drilling setups and simplifies repeating the same layout on several fronts.
• The 4-1/16 inch overall length offers extended edge coverage on drawer or door faces, which can assist in lining the pull visually with rail profiles and panel proportions.
• The 1 inch projection and 1-1/4 inch width define the grip envelope, which affects finger clearance behind the cup and the pull's visual weight on narrower drawer fronts.

Mounting And Fit Details For This Cup Pull

The 64 mm, or 2-1/2 inch, center to center measurement governs where mounting holes land, so shop jigs and templates can be set once and reused across an entire run of cabinets. The 8-32 x 1 inch screw size defines the threaded interface, aligning with common cabinet door and drawer construction that accepts this thread standard. The 4-1/16 inch overall length influences how the pull spans stile or drawer front width, guiding placement when balancing margins from edges. With a 1 inch projection, the pull extends enough from the face to allow a hand to catch the underside of the cup, shaping the feel when opening heavier drawers. The 1-1/4 inch width sets how much vertical space the pull occupies on the face, which can be important when working around narrow rails or decorative edge profiles.

Using The Dull Bronze Cup Pull In Work

Where This Dull Bronze Cup Pull Fits Best

The dull bronze finish on this Berenson Andante cup pull suits cabinet layouts that favor warmer, quieter tones over bright metal surfaces, so it works naturally with many stained woods and painted finishes. As a decorative hardware and moldings component in the handles and pulls class, it plays the role of a primary touch point on drawers and doors. The overall length of 4-1/16 inches helps it sit comfortably on standard kitchen and bath drawer fronts, providing enough spread to look proportional on mid-size cabinetry. Because the center to center dimension is 64 mm, or 2-1/2 inches, this pull aligns with common small-to-medium drawer layouts typically drilled on that spread. The 1-1/4 inch width keeps the profile compact, which is useful on fronts with narrow rails or detailed routing where a taller pull could crowd the design.

Details That Support Consistent Cabinet Results

The 2-1/2 inch, or 64 mm, center to center spacing gives installers a repeatable reference for jig set-up, helping maintain straight lines of pulls across multiple cabinet banks. The zinc die cast construction delivers a uniform casting, which supports consistent screw alignment when driving into pre-bored fronts. The 8-32 x 1 inch screw specification defines the fastening standard for this pull, allowing fabrication plans to account for screw length relative to door or drawer material thickness. With a projection of 1 inch, the pull establishes a predictable standoff from the cabinet face, which can be factored into clearances near adjacent doors, appliances, or side walls. The dull bronze finish provides a controlled sheen level, which keeps reflections consistent from pull to pull under under-cabinet or ceiling lighting. The Andante Series identity anchors this pull within Berenson's decorative hardware lines, which can simplify future matching when a space is expanded or fronts are replaced.

Common Questions About This Berenson Cup Pull

Selecting This Cup Pull For Your Next Job

The Berenson Andante Series 2-1/2 inch center to center dull bronze cup pull brings a defined 64 mm drilling spread, zinc die cast construction, and a 4-1/16 inch length to cabinet projects. These dimensions give installers a predictable pattern for laying out fronts, while the 1 inch projection and 1-1/4 inch width define a compact, functional grip zone. The dull bronze finish offers a warm, subdued appearance suitable for many wood tones. For projects calling for a coordinated cup pull with known measurements and mounting details, this model provides clear, job-ready information for specifying and ordering through Wurth Baer Supply.