Berenson Andante 5-1/16" (128 mm) Center to Center Antique Pewter Pull, 3011-1AP-P

Berenson Andante Antique Pewter Cabinet Pull Use

Berenson Andante antique pewter pull is a zinc die cast handle designed for decorative cabinet and furniture applications, so it works as both a functioning pull and a visual detail on doors and drawers. The Andante collection identity keeps this pull consistent with other Andante pieces on the same project, which helps maintain a unified hardware look across a run of cabinets. The 5-1/16 inch (128 mm) center to center dimension matches standard drilling patterns, which lets installers line this pull up with common boring jigs for quicker layout. Overall length of 5-11/16 inch gives hand clearance across wider drawer fronts, improving grip when opening loaded drawers. Antique pewter finish brings a muted metallic appearance, which suits projects calling for a traditional tone rather than a bright reflective surface.

Key Details That Support Cabinet Hardware Work

• The zinc die cast material provides a solid metal pull body, which supports everyday use on frequently opened cabinet doors or drawers in kitchens, baths, or shop storage.
• The antique pewter finish creates a darker metallic look, which helps this pull coordinate with other antique pewter hardware on the same job for finish consistency.
• The 5-1/16 inch center to center measurement aligns with a common 128 mm drilling standard, which simplifies layout when using cabinet hardware templates or CNC-drilled fronts.
• The 5-11/16 inch overall length gives extra handle span, which offers more hand contact area across wider drawer fronts for a comfortable pull motion.
• The 1-1/4 inch projection sets the pull off the surface enough for fingers to wrap behind it, which helps users get a secure grip even on thicker cabinet doors.
• The 5/8 inch width and 5/8 inch base diameter keep the pull visually balanced on face frames and slab fronts, which supports clean alignment in both framed and frameless layouts.

Mounting And Alignment Details For This Pull

The 5-1/16 inch (128 mm) center to center dimension defines the hole spacing for this Berenson Andante pull, which lets installers drill or program consistent mounting points across multiple cabinet fronts. The specified 8-32 x 1 inch screw size matches a standard machine screw thread used in cabinet hardware, which fits typical door and drawer panel thicknesses encountered in many woodworking projects. The 1-1/4 inch projection keeps the working grip point at a practical distance from the cabinet face, which reduces knuckle contact with the surface when opening doors or drawers. With a 5/8 inch base diameter at each mounting point, the pull seats against the surface over a modest footprint, which helps cover the drilled hole edges while keeping the hardware visually light on narrower rails and stiles.

How This Berenson Andante Pull Fits Project Needs

Where The 5-1/16 Inch Pull Is Typically Used

This Berenson Andante Series pull is a decorative handle for cabinets and furniture, so it is suited to doors and drawers in kitchens, bathrooms, offices, or built-ins that need a metal pull with a defined center to center size. The 5-1/16 inch (128 mm) center to center spacing fits layouts already bored for that standard, which is common on many factory-built cabinets and custom shop jigs. Its 5-11/16 inch overall length helps it sit proportionally across medium and wider fronts, which keeps the pull from looking undersized on larger drawer faces. Antique pewter finish places this pull in projects that favor a softer look than bright chrome, so it aligns well with stained woods or painted finishes where a subdued tone is preferred.

Details That Support Consistent Installation Results

The defined 5-1/16 inch (128 mm) center to center measurement on the Andante pull allows repeatable drilling and installation, which helps maintain straight alignment of pulls along cabinet runs. Using the specified 8-32 x 1 inch screw size pairs the pull with a common fastener length and thread, which streamlines hardware selection across multiple doors and drawers of similar thickness. The 1-1/4 inch projection offers a stable grip point away from the cabinet surface, which can ease operation for users when opening heavier drawers. With a 5/8 inch width, the pull presents a consistent front profile, which helps installers visually line up multiple pulls to door and drawer edges during layout. The 5/8 inch base diameter at each contact point sets a defined bearing area where the pull meets the front, which supports a neat finished appearance around each drilled hole.

Common Questions About The Andante Pewter Pull

Choose This Pull For 128 Mm Layout Projects

The Berenson Andante antique pewter pull combines a 5-1/16 inch (128 mm) center to center layout, 5-11/16 inch overall length, and 1-1/4 inch projection, which supports practical cabinet door and drawer operation. When a project calls for zinc die cast construction with an antique pewter finish, this 3011-1AP-P pull lines up with standard 128 mm drilling while presenting a consistent 5/8 inch wide profile across the run.