
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Wurth 18 gauge 1 inch staple describes an 18 gauge fastener with a 1 inch leg length, so you get a light-duty staple sized for common cabinet building tasks where a thinner wire is preferred. The 7/32 inch crown identifies a narrow crown profile, which concentrates holding power in a tight strip and is useful when fastening parts where visible fastener width needs to stay small. The product is identified as a staple in the staples fastener class, which places it in a familiar category for installers who already use narrow crown staplers in their workflow. The manufacturer part number EBSX5035-25 provides an exact reference, which helps match existing shop standards and reorder the same staple when projects repeat.
The web description states that this staple fits Bostitch S32SX, T40SX-CT, SB-150SX and similar models, so installers using those tools can select this fastener as a matched fit for their staplers. That direct fit information means the 18 gauge, 7/32 inch crown geometry aligns with the magazine and drive channel of those Bostitch tools, helping the tool cycle properly during production runs. The fit with named models also gives a practical reference point when choosing compatible staplers with similar specifications, because tools designed around the same staple profile will generally feed and drive this fastener smoothly in the shop.
The web description lists cabinet building as an application, so this staple serves for fastening cabinet components during case assembly and related operations. Underlayment is also noted as an application, which ties the 1 inch leg length to securing sheet goods over sublayers in flooring or panel build-ups. Moldings are identified as another use, meaning the narrow 7/32 inch crown works on trim pieces where a compact fastener head helps control visible marks. Because it is categorized as a staple in the fasteners group, the product is positioned for general woodworking fastening tasks where an 18 gauge, narrow crown pattern fits the job requirements.
The combination of 18 gauge wire and 1 inch leg length delivers a consistent penetration profile, so repeated shots in cabinet building and underlayment work behave predictably from piece to piece. The 7/32 inch crown dimension defines a stable bearing surface, which spreads force along a narrow strip and helps hold moldings and thin parts flat against their substrate during installation. Matching the staple to tools such as the Bostitch S32SX, T40SX-CT, and SB-150SX means the fastener geometry is tuned to established stapler designs, supporting reliable feeding and driving during high-volume work. Using the specific part number EBSX5035-25 across projects standardizes this staple choice, which helps crews align on one fastener specification for repeat jobs and reduces variation in finished fastening results.
The staples are described for cabinet building, underlayment, and moldings, so they cover typical woodworking fastening tasks in those three application areas.
The 18 gauge designation indicates a relatively thin staple wire, which creates smaller holes in cabinet materials and trim while still delivering mechanical hold.
The 7/32 inch crown defines a narrow head width, so the staple grips along a tight line that is easier to hide on moldings and visible cabinet faces.
The web description lists Bostitch S32SX, T40SX-CT, SB-150SX and similar models, so these tools share the staple profile used by this product.
The staples have a 1 inch leg length, which reaches through cabinet parts, underlayment sheets, or moldings into the substrate for holding power.
The staple is identified by manufacturer part number EBSX5035-25, so using that code keeps future orders aligned with this exact size.
This Wurth 18 gauge x 7/32 inch crown x 1 inch staple ties a specific gauge, crown width, and leg length to applications in cabinet building, underlayment, and moldings, so you can align the fastener with those tasks. Fit with Bostitch S32SX, T40SX-CT, SB-150SX and similar models connects directly to common staplers on the bench. Using the EBSX5035-25 part number standardizes that choice, helping jobs stay consistent whenever this staple is specified for woodworking work.
Sold In: 1 Box
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Box | WWS18075N Mfr# S18075N | Würth 18 Gauge x 7/32" Crown x 3/4"L Staple, S18075N - 5000/Box | ||||
Sold in: 1 Box | WWS18119N Mfr# EBSX5035-30 | Würth 18 Gauge x 7/32" Crown x 1-3/16"L Staple, EBSX5035-30 - 3000/Box | ||||
Sold in: 1 Box | WWS18125N Mfr# EBSX5035-32 | Würth 18 Gauge x 7/32" Crown x 1-1/4"L Staple, EBSX5035-32 - 3000/Box |