Würth 18 Gauge x 7/32" Crown x 1-3/16"L Staple, EBSX5035-30 - 3000/Box

Wurth 18 Gauge 7/32 Crown Staple For Woodwork

Wurth 18 gauge 7/32 crown staple is a narrow crown, 1-3/16 inch long staple designed for cabinet building, underlayment, and moldings, so one staple style can serve several typical shop framing and trim tasks. The 18 gauge wire size creates a relatively small footprint in wood, which helps limit visible fastener marks on finished cabinet faces and moldings. The 7/32 inch crown concentrates holding power in a narrow strip, which supports fastening in tighter spots such as face frames and light trim. The 1-3/16 inch leg length drives deeper into substrates used in underlayment work, giving more bite where sheet goods need secure fastening. This staple works with Bostitch S32SX, T40SX-CT, SB-150SX and similar models, which ties directly into tools already common in many cabinet and finish carpentry shops.

Key Staple Details For Woodworking Jobs

• The 18 gauge construction keeps the staple profile small, which helps reduce surface repair around fastener points on cabinets and moldings while still delivering dependable penetration in typical woodworking materials.
• The 7/32 inch crown creates a narrow fastening line, which fits well along slim moldings and cabinet parts where wider crowns could telegraph through or crowd the available fastening area.
• The 1-3/16 inch leg length reaches deeper into underlayment and cabinet components, which supports stronger pull-out resistance when fastening sheet goods or joining thicker stock in shop or jobsite work.
• Applications listed as cabinet building, underlayment, and moldings define the staple for both structural assembly and light trim fastening, which helps standardize fasteners across multiple woodworking tasks.
• Fit to Bostitch S32SX, T40SX-CT, SB-150SX and similar models lets crews run this staple in common staplers, which simplifies fastener stocking and reduces changeover time between tools in the same gauge and crown family.

Fastener Size And Tool Fit For Installation

This staple is specified as 18 gauge with a 7/32 inch crown and 1-3/16 inch length, so installers can match it directly to stapler magazines and depth settings intended for this combination. The narrow crown format aligns with staplers designed around the Bostitch S32SX, T40SX-CT, and SB-150SX families, which helps keep drive performance consistent during cabinet building and molding installation. With leg length fixed at 1-3/16 inch, depth control on the stapler can be tuned to seat the staple flush without over-driving through underlayment or thinner trim pieces, supporting a clean surface ready for further finishing steps.

Using This Staple In Cabinet, Floor, And Trim Work

Where This 18 Gauge Staple Performs Best

This Wurth 18 gauge 7/32 crown staple is specified for cabinet building, which positions it for assembling boxes, attaching backs, and securing internal components where a narrow crown fastener is preferred. The same staple is listed for underlayment, so it supports fastening sheet goods to substructures in flooring or similar applications where leg length and gauge must balance holding strength with controlled penetration. Moldings are also identified as a target application, tying the narrow 7/32 inch crown directly to holding small or medium profiles without leaving a wide fastener track. Because it fits Bostitch S32SX, T40SX-CT, SB-150SX and similar models, the staple slots naturally into pneumatic or similar staplers already set up for this fastener family in cabinet and finish carpentry environments.

Why These Fastener Details Support Consistent Results

The 18 gauge size on this staple provides a compromise between strength and reduced surface disruption, which is important when cabinet building demands solid joints that still finish smoothly. The 7/32 inch narrow crown focuses clamping along a slim line, which helps pull face frames, moldings, and underlayment tight without spreading the load too broadly across visible areas. With a fixed 1-3/16 inch leg, the staple can reach into both thin and moderate-thickness materials used in cabinets, floors, and trim, which simplifies choosing a single length for many recurring fastening points. Tool fit for Bostitch S32SX, T40SX-CT, SB-150SX and similar staplers links these dimensions directly to proven driving platforms, which supports repeatable penetration and seating from one project to the next in a professional woodworking setting.

Common Questions About This Wurth EBSX5035-30 Staple

Select This Staple For Focused Woodworking Tasks

This Wurth 18 gauge 7/32 crown, 1-3/16 inch long staple ties its size, crown width, and leg length directly to cabinet building, underlayment, and molding work, giving shops a single fastener ready for these identified tasks. Tool fit with Bostitch S32SX, T40SX-CT, SB-150SX and similar staplers connects those applications to familiar tools. Choosing this EBSX5035-30 staple keeps fastener selection aligned with the specified woodworking uses, supporting consistent results across assembly and trim runs.