Würth 18 Gauge x 7/32" Crown x 1-1/4"L Staple, EBSX5035-32 - 3000/Box

Wurth 18 Gauge 7/32 Crown Staple For Cabinet Work

Wurth 18 gauge 7/32 crown staple Wurth EBSX5035-32 is a 1-1/4 inch long staple used where a narrow crown and fine wire help hold parts without a wide footprint. This size and gauge work well in cabinet building, so case parts and stretchers can be fastened with a light, controlled footprint along joints. The same staple is specified for underlayment, giving a consistent hold pattern across floor panels where a narrow crown reduces surface disruption before finish layers. It is also listed for moldings, so light trims can be secured without an oversized crown telegraphing through the face. Using one staple that covers cabinets, underlayment, and moldings helps keep fastener choices simple on the job when working across different stages of a project.

Key Staple Details That Support Wood Projects

• The 18 gauge wire size gives a relatively fine shank that penetrates cabinet materials, underlayment, and moldings with less displacement, which matters when working near edges or thinner stock.
• The 7/32 inch crown width creates a narrow profile on the surface, so cabinet faces, moldings, and exposed areas show less fastener line while still spreading load across the staple legs.
• The 1-1/4 inch leg length reaches deeper into substrates used in cabinet building and underlayment work, which supports stronger holding power where sheet goods and framing meet.
• The staple is used for cabinet building, underlayment, and moldings, so one fastener size serves multiple tasks and keeps setup consistent across those applications.
• The EBSX5035-32 designation ties directly to this staple, which helps match fasteners to documentation or repeat the same product when reordering for similar jobs.

Staple Fit With Bostitch Fine Wire Tools

The staple fits tools listed as Bostitch S32SX, T40SX-CT, SB-150SX and similar models, which ties the staple geometry to common Bostitch fine wire staplers used in shops. Matching this staple to these tools keeps drive consistency the same on cabinet building, underlayment, and moldings, so fastening patterns stay predictable across multiple passes. When a stapler such as the Bostitch S32SX or SB-150SX is already in use, using a staple specified to fit those models helps maintain depth control and penetration in the materials these tools are designed to handle.

Using This Wurth Staple In Woodworking Tasks

Where This 18 Gauge Staple Is Applied

The web description lists cabinet building as a primary application, so this 18 gauge, 7/32 crown, 1-1/4 inch long staple is suited to assembling cabinet components and related parts. Underlayment is another named application, so it can be used to fasten panels over subfloors, tying the staple length and gauge to floor preparation work. Moldings are specifically called out, meaning the narrow crown helps hold trims where a smaller surface footprint is useful for a cleaner appearance. With these three uses specified together, this single Wurth staple supports several stages of woodworking projects, from building cabinets to preparing floors and attaching finish trims in the same workflow.

How Verified Details Support Consistent Results

The 18 gauge wire size, combined with the 7/32 inch crown, shapes how the staple enters cabinet materials, underlayment, and moldings, giving a balance between penetration and surface mark size that supports repeatable fastening. The 1-1/4 inch leg length defines how deep the staple can seat into sheet goods and backing materials, which matters when the same fastener is used across cabinets and underlayment where consistent grip is needed. The stated fit with Bostitch S32SX, T40SX-CT, SB-150SX and similar models ties the staple dimensions directly to staplers many woodworkers already run, which supports consistent driving action over long runs of cabinets or panel work. The defined applications and matching tool list together help standardize fastener choice, so fastening patterns and depth behavior remain stable from one project to the next when this EBSX5035-32 staple is used.

Common Questions About EBSX5035-32 Wood Staples

Select EBSX5035-32 Staples For Wood Projects

The Wurth EBSX5035-32 18 gauge, 7/32 inch crown, 1-1/4 inch long staple is defined for cabinet building, underlayment, and moldings, so one fastener size can cover those woodworking tasks. Its specified fit with Bostitch S32SX, T40SX-CT, SB-150SX and similar models connects directly to staplers already used in many shops. Choosing this staple keeps dimensions, applications, and tool fit aligned under a single part number when planning cabinet, floor underlayment, or molding runs.