Rev-A-Shelf 5WB2 Chrome 11-3/4" 2-Shelf Pullout Organizer with Standard Slides, 5WB2-1218CR-1

Choose a Rev-A-Shelf wire shelf pullout organizer

Rev-A-Shelf wire shelf pullout organizer gives base cabinets easier access with a two-tier chrome wire shelf design and a bracket-mounted pull-out format. This Rev-A-Shelf base cabinet organizer is the 5WB2-1218CR-1 model, built for base cabinet use with heavy gauge wire construction and standard slides. The Rev-A-Shelf 2-shelf pullout organizer installs inside the cabinet and fastens to a U-shaped support bracket that is included. The bracket adjusts shelf height up and down and uses a telescoping rear mount to improve fit during installation. Chrome wire pull out shelves help keep stored items visible, while full extension ball bearing slides support smooth access. If you plan to add a cabinet door connection, note that a door mount kit is sold separately.

Use a base cabinet pull-out system efficiently

• Two-tier shelf system - The Rev-A-Shelf pullout organizer creates two storage levels so base cabinet contents are easier to separate and reach.
• Heavy gauge wire construction - The wire shelf pullout organizer uses a sturdy frame style that supports everyday kitchen and bath cabinet storage.
• Chrome wire finish - Chrome wire pull out shelves provide open visibility, making it easier to see stored items without unloading the cabinet.
• Precision full extension ball bearing slides - The base cabinet pull-out system extends fully so items at the back are easier to access.
• Slides rated at 100 lb - The Rev-A-Shelf organizer is built for substantial cabinet storage loads when installed as directed.
• U-shaped support bracket included - The included bracket gives the pullout organizer a defined mounting method for cabinet base installation.
• Adjustable shelf height - The bracket lets the shelves move up or down, helping installers position the organizer for the stored items.
• Telescoping rear mount - The rear mount improves adjustability during installation inside the cabinet.
• Door mount kit sold separately - Buyers can plan for a separate door mounting accessory if their installation requires it.

Confirm fit for chrome wire pull out shelves

Key specs to confirm: This Rev-A-Shelf 2-shelf pullout organizer is described as an 11-3/4 inch by 18 inch unit and is intended for base cabinet installation. Before ordering, confirm your cabinet interior width, usable depth, door opening, and any obstructions that could interfere with the U-shaped bracket or slide travel. The product uses precision full extension ball bearing slides rated at 100 lb. If you need additional load, compliance, or technical details beyond that rating, those details should be confirmed with the manufacturer or technical documentation.

What's included: The package includes the two-tier organizer and the U-shaped support bracket. The bracket includes a telescoping rear mount. Standard slides are part of the organizer assembly. A door mount kit is not included and is sold separately.

What to verify before ordering: Confirm cabinet type is a base cabinet, check that the interior can accept an 11-3/4 inch by 18 inch organizer, verify clearance for full slide extension, and decide whether your installation needs a separate door mount kit.

Compare Rev-A-Shelf base cabinet organizer details

Match the pullout organizer to daily storage

A base cabinet pull-out system like this is typically chosen when stored items are getting lost behind fixed shelves. In a kitchen, that often means oils, wraps, containers, or cleaning items placed deep in the cabinet. In a bath or utility area, it can mean bottles and supplies that are hard to reach from the back. The Rev-A-Shelf wire shelf pullout organizer addresses that access problem with two open wire shelves mounted on a pull-out frame.

The open wire design matters because it keeps contents visible from the front. Instead of kneeling and reaching into a dark cabinet cavity, the user can pull the organizer out on full extension ball bearing slides and bring stored items forward. The two-tier layout also helps separate taller and shorter items, especially when the installer uses the included U-shaped support bracket to adjust shelf height up or down.

For installers, the included bracket is a practical detail. The organizer fastens within the cabinet to the bracket, and the telescoping rear mount improves adjustability during setup. That can help when cabinet interiors vary slightly or when the installer needs to fine-tune placement. Buyers searching by model reference such as RS5WB2-1218-CR, revashelf, or rev a shelf often want to match an existing organizer footprint or replace a worn pull-out with the same general format. This page supports that need by clearly identifying the product as a two-tier chrome wire pullout organizer for base cabinets.

If your project calls for attaching the cabinet door to the pullout, remember that the door mount kit is sold separately. That detail is important because some buyers expect all mounting hardware to be in one carton. Also confirm cabinet depth and door opening before purchase, since smooth operation depends on clear travel space for the organizer and slides.

Compare chrome wire pull out shelves wisely

When comparing pullout shelves in this category, buyers usually focus on three practical points: mounting style, access, and adjustability. This Rev-A-Shelf base cabinet organizer uses an included U-shaped support bracket that mounts to the cabinet base, rather than relying on a loose shelf insert format. That gives installers a defined mounting path and a clear way to position the unit inside the cabinet.

Access is another key difference. The precision full extension ball bearing slides help bring the full organizer outward, which is useful when the cabinet stores smaller items that would otherwise stay hidden at the back. The verified 100 lb slide rating gives buyers a concrete reference point when planning what the organizer will hold. For projects where load, code, or other technical criteria matter beyond the listed rating, those details should be checked in manufacturer documentation.

Adjustability also affects long-term usability. The included bracket allows shelf height adjustment, and the telescoping rear mount improves fit flexibility during installation. That can make the organizer easier to align in real cabinet conditions. Buyers comparing generic pullout options often want a product with clearly stated included parts, a known brand, and a straightforward installation approach. This Rev-A-Shelf 2-shelf pullout organizer provides those verified details without requiring assumptions about unlisted accessories or unverified performance claims.

Ask fit questions before installing pullout shelves

Order the right Rev-A-Shelf pullout organizer

Rev-A-Shelf base cabinet organizer is a practical choice when you need two-tier pull-out access, an included U-shaped bracket, and full extension ball bearing slides in a chrome wire format. Before purchase, confirm your cabinet interior size, usable depth, and door clearance for an 11-3/4 inch by 18 inch organizer. Check whether your project needs only the included bracketed organizer or also requires the separately sold door mount kit. Matching those details first helps avoid fit issues at installation.