Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Studio Series pull gives you a 5-1/16 inch center to center grip that lines up with common cabinet drilling, so you can match existing layouts on doors and drawers without changing hole spacing. The Belwith Keeler design uses zinc die cast construction, which provides a solid-feeling handle that helps doors and drawers open with a confident pull in everyday use. Its oil rubbed bronze highlighted finish adds a darker tone with lighter edge accents, so the pull can visually tie together face frames, doors, and drawer fronts in coordinated installations. With an overall length of 6-1/8 inches, the pull visually spans typical cabinet rail widths, helping handles look proportionate on standard kitchen and bath fronts. A projection of 1-3/8 inches sets the hand clearance off the face of the cabinet, which supports a comfortable grip while reducing the chance of fingers rubbing against the door or drawer surface.
This P3012-OBH cabinet pull from the Studio Series is defined by its 5-1/16 inch center to center spacing, so drilled holes align in a straight line for clean mounting on doors or drawers. The base diameter of 1-1/8 inches gives each mounting point a defined footprint, helping the pull sit flat against the cabinet face and cover the drilled hole edges for a finished look. With a 1-3/8 inch projection off the surface, the pull provides working space between fingers and the cabinet, which supports smooth operation on doors and drawers used many times a day. The 6-1/8 inch length and 1-1/4 inch width work together to create a handle that feels substantial across the hand, which is helpful on larger fronts where a small pull can look undersized.
The 5-1/16 inch (128 mm) center to center measurement on this Belwith Keeler Studio Series pull matches a common drilling pattern, so it fits well on standard cabinet doors and drawers in kitchens, baths, and built-ins that follow this spacing. Its 6-1/8 inch overall length extends slightly beyond the drilling points, giving a balanced look on medium-width drawers and doors where very short pulls can feel out of scale. The 1-1/4 inch width provides a defined gripping surface, so hands find the pull easily along a row of fronts, which helps in busy work areas. With a 1-1/8 inch base diameter at each end, the pull covers the hole area with a consistent round footprint, supporting a clean transition between hardware and cabinet surface across multiple installations.
The defined 128 mm center to center spacing on the P3012-OBH cabinet pull supports repeatable layout, since installers can rely on a single measurement when drilling multiple fronts. This measurement also works well with common drilling jigs designed around 5-1/16 inch spacing, which helps maintain straight, level runs across a bank of doors or drawers. The 1-3/8 inch projection creates consistent stand-off from the cabinet face, so doors and drawers open with similar finger clearance throughout a project. A 1-1/4 inch width paired with the 6-1/8 inch length gives a predictable feel every time the pull is grabbed, which is useful when matching hardware across several rooms. The oil rubbed bronze highlighted finish remains the same part to part, supporting visual continuity when many pulls are used in one installation.
The Hickory Hardware Studio Series pull has a 5-1/16 inch (128 mm) center to center size, so mounting holes are spaced to match this common cabinet drilling dimension.
The P3012-OBH cabinet pull measures 6-1/8 inches in overall length, which helps it span a useful portion of typical cabinet doors and drawers.
The Studio Series pull is made from zinc die cast material, giving a formed metal body that provides a consistent feel in daily cabinet use.
This oil rubbed bronze highlighted pull has a projection of 1-3/8 inches, creating space between the cabinet face and hand for comfortable gripping.
The Hickory Hardware Studio Series pull has a width of 1-1/4 inches, offering enough face area for a secure handhold on doors and drawers.
Each mounting point on this cabinet pull has a base diameter of 1-1/8 inches, which helps cover drilled holes and define a clean contact area.
This Belwith Keeler Hickory Hardware Studio Series pull pairs a 5-1/16 inch (128 mm) center to center layout with a 6-1/8 inch length, so it fits common cabinet drilling while looking proportional on doors and drawers. The zinc die cast construction and 1-3/8 inch projection work together to provide a solid, comfortable grip that supports regular opening and closing in kitchens, baths, and built-ins. The oil rubbed bronze highlighted finish and 1-1/4 inch width give the pull a defined visual presence on the cabinet face. For projects built around 128 mm spacing that call for an oil rubbed bronze highlighted handle, this P3012-OBH pull is a direct, dimensioned option.
Sold In: 1 Each
