Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Studio Series cup pull gives cabinets a defined grip point using a recessed cup shape that is practical for frequent use. The zinc die cast material provides a solid metal body that supports routine opening and closing on active cabinet runs. The oil rubbed bronze highlighted finish presents a darker tone with highlighted edges that can coordinate with similarly finished hinges and other visible hardware. The 3 inch and 96mm center to center drilling options on this P3013-OBH pull allow it to align with two common hole spacings, which can simplify layout on new doors or drawer fronts. The 4-7/8 inch overall width spans a wider portion of the face of the workpiece, which helps visually balance wider drawer fronts. A 1 inch projection offers clearance for fingers while keeping the hardware close to the face, which is useful where door swing or drawer spacing is tight.
This Belwith Keeler cup pull uses 3 inch and 3-3/4 inch (76 mm and 96 mm) center to center hole spacing, so drilling can follow either measurement depending on the cabinet plan. The threaded interface is designed around 8-32 screw size, which is a common machine screw thread in cabinet hardware and fits standard boring for that pattern. The 1 inch projection defines how far the pull stands off the cabinet surface, which influences whether fronts can pass by each other in tight reveals. With a 4-7/8 inch overall length, this P3013-OBH pull can be positioned so edges align visually with rail or stile proportions. The 2 inch length or diameter dimension helps in confirming edge distances when setting up drilling jigs or spacing guides.
The Hickory Hardware Studio Series 3 inch (76 mm) center to center oil rubbed bronze highlighted cup pull is suited to cabinet and drawer fronts where a recessed grip style is desired. The 3 inch and 3-3/4 inch (76 mm and 96 mm) center to center drillings make this Belwith Keeler P3013-OBH pull useful in layouts that use either common spacing, so it can be applied in banks of drawers with varying widths while keeping a consistent hardware style. The oil rubbed bronze highlighted finish pairs with projects calling for a dark, aged-inspired look with lighter highlights on raised areas, supporting a coordinated hardware theme across a run of cabinets. The 4-7/8 inch width lays out well on medium to wider drawer faces, where the broader footprint helps the pull read as proportionate to the front. A 1 inch projection offers space for a hand to catch the bottom of the cup, which supports repeatable grip on frequently used drawers and doors.
The combination of 3 inch and 3-3/4 inch (76 mm and 96 mm) center to center sizing on this zinc die cast cup pull gives installers flexibility when working with existing holes or pre-bored fronts that follow those standards, which can reduce layout changes from job to job. The 8-32 thread specification works with typical cabinet hardware boring and tap patterns, which helps keep fastener selection consistent across different pulls and knobs in the same space. The zinc die cast construction produces a defined shape with stable dimensions, which aids in aligning multiple pulls in a straight line along a rail or across a drawer bank. The 2 inch length or diameter dimension and 4-7/8 inch overall width allow installers to reference specific edges when aligning jigs, supporting consistent setback and height across multiple faces. The oil rubbed bronze highlighted finish on the Studio Series design provides a repeatable visual match from one pull to the next, which matters when hardware is viewed in long runs. The 1 inch projection holds the working edge of the cup away from the door or drawer surface enough to grab, while staying relatively low profile to respect tight cabinet reveals or nearby obstacles.
The P3013-OBH is a Hickory Hardware Studio Series cup pull made by Belwith Keeler, so it functions as a recessed cabinet and drawer pull within that decorative hardware family.
This cup pull provides 3 inch and 3-3/4 inch (76 mm and 96 mm) center to center spacing, giving two drilling options that match common cabinet hardware layouts.
This Studio Series pull is zinc die cast with an oil rubbed bronze highlighted finish, combining a solid metal body with a dark tone and highlighted edges.
The P3013-OBH cup pull has a width of 4-7/8 inches, giving it a broader footprint that suits medium to wider cabinet drawer fronts.
This Belwith Keeler cup pull has a 1 inch projection, so it stands off the cabinet surface enough for finger clearance while remaining relatively low profile.
The P3013-OBH is designed around 8-32 screw size, aligning with common cabinet hardware threading for straightforward fastening into standard boring.
The Hickory Hardware Studio Series 3 inch (76 mm) center to center oil rubbed bronze highlighted cup pull, P3013-OBH, combines zinc die cast construction with dual 3 inch and 3-3/4 inch (76 mm and 96 mm) center to center spacing. That mix supports projects calling for a consistent cup pull style across cabinets and drawers that share those common drilling patterns. The 4-7/8 inch width and 1 inch projection round out the working dimensions so layouts can be planned confidently around grip clearance and visual proportion. For cabinet runs designed around 8-32 threaded hardware and these drilling measurements, this Belwith Keeler cup pull offers a defined, repeatable option.
Sold In: 1 Each
