Nexis Adjustable Face Frame Mounting Plate, Nickel-Plated, Screw-On, 0mm

Nexis Mounting Plate For Face Frame Hinges

Nexis Adjustable Face Frame Mounting Plate is a die-cast steel hinge base plate designed for Grass America Nexis hinges, giving cabinets a solid mounting interface on a face frame. The 0mm plate height keeps the door position tight to the frame, which matters when matching reveals across a run of doors. The screw-on design fastens directly to the cabinet side, so installers can rely on a familiar workflow with standard tools. The nickel-plated finish covers the die-cast steel body, providing a clean, neutral look inside the cabinet that coordinates with typical hinge finishes. The elongated screw holes in the plate provide plus or minus 2 mm of height adjustment, so the door position can be fine-tuned without moving the hinge cup in the door. This face frame adapter plate uses a clip-on connection to the hinge, allowing the Nexis hinge arm to be attached or removed at the plate quickly during fitting, drilling, or door alignment work.

Key Nexis Plate Details That Support Installers

• The Nexis face frame adapter plate is made of die-cast steel, giving the mounting point a rigid base that resists flexing when doors are opened repeatedly and when heavier door constructions are used.
• The 0mm plate height keeps the hinge interface close to the cabinet face frame, which supports tight, even reveals when layout demands doors sit nearer to the frame without extra build-up.
• The face frame adapter plate provides plus or minus 2 mm of height adjustment through elongated screw holes, so vertical door alignment can be dialed in after hanging without reboring or shifting the hinge cup.
• The plate attaches to the cabinet side via #6 x 5/8 inch flat head screws, giving installers a clear fastener size and length that works with typical cabinet side material thicknesses.
• The hinge affixes to the mounting plate by a clip-on design, which speeds installation and allows doors to be removed and re-hung during finishing, transport, or later service without disturbing screw positions.
• The nickel-plated finish on the die-cast steel body creates a consistent metal surface that pairs visually with common hinge finishes and helps maintain a professional appearance inside the cabinet.

Screw-On Nexis Plate Setup And Alignment

This Grass America hinge mounting plate is a screw-on style, so it fastens directly into the cabinet side with #6 x 5/8 inch flat head screws, giving a positive mechanical connection into wood or typical panel material. The elongated mounting holes in the plate allow plus or minus 2 mm of vertical travel, so the installer can loosen the screws, shift the plate slightly, and retighten to move the door up or down. Because the plate height is 0mm, there is no built-in rise between the frame surface and the hinge arm, which supports installations where the hinge geometry already accounts for face frame thickness. The clip-on interface between the Nexis hinge arm and the face frame adapter plate means doors can be hung after plates are set, which supports a step-by-step workflow for drilling, mounting, and final gap tuning.

Using This Nexis Plate In Cabinet Projects

Where This Nexis Face Frame Plate Fits Best

This Nexis face frame adapter plate is part of the Grass America Nexis hinge system, so it serves as the link between the hinge arm and a face frame construction. The 0mm plate height suits layouts where the hinge system is engineered to place the door close to the frame without additional offset from the plate. Because it mounts to the cabinet side with #6 x 5/8 inch flat head screws, it works well in typical face frame cabinets where side panels provide enough depth for those fasteners. The nickel-plated, die-cast steel construction keeps the plate compact while still giving a solid mounting surface behind the hinge arm, which is important in narrow face frame rails and stiles where space is limited.

How Nexis Adjustment And Clip-On Help Alignment

The plus or minus 2 mm height adjustment built into the elongated screw holes makes this height adjustable hinge base plate practical for refining door gaps after initial hanging. Instead of relocating a hinge cup, the installer can shift the plate slightly to bring multiple doors into line along a face frame. The clip-on attachment between the Nexis hinge and the face frame mounting plate lets doors be removed quickly during finishing work or access, then reattached to the same positions without disturbing the adjusted screw settings. The 0mm plate height also simplifies repeatable layout, because every plate in a run shares the same zero-rise reference, supporting consistent drilling patterns and predictable overlay results when using Nexis hinges. Together, these details help reduce rework during cabinet installation because vertical alignment and removal are handled at the plate, not at the door.

Common Nexis Face Frame Plate Questions

Selecting This Nexis Plate For Face Frame Work

The Nexis Adjustable Face Frame Mounting Plate brings together a 0mm plate height, screw-on mounting, plus or minus 2 mm height adjustment, and a clip-on connection to Nexis hinges, so it supports precise door alignment on face frame cabinets. The die-cast steel, nickel-plated construction gives a solid, consistent base plate for Grass America Nexis hardware across a run of cabinets. When a project calls for Nexis hinges on face frames with controlled reveals, this hinge mounting plate offers the defined geometry and adjustment needed to hit those layout goals efficiently.