
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Nexis adjustable face frame mounting plate describes a Grass America hinge mounting plate designed for face frame cabinets, so it gives you the dedicated interface between Nexis hinges and a face frame layout. The plate is part of the Nexis face frame adapter plates line, so its geometry matches the Nexis hinge clip-on connection for consistent engagement. The plate is nickel-plated, which provides a hard, corrosion-resistant surface that holds up during repeated hinge adjustments and door cycles. The body is made of die-cast steel, so you get a rigid base that resists flexing when doors are loaded. This version has a 4mm plate height, establishing the hinge-to-frame offset that sets your door reveal. As a hinge mounting plate in the Hinge Mounting Plates class, it serves as the fixed reference for door alignment on face frame cabinetry.
This Nexis face frame adapter plate mounts to the cabinet side on a face frame construction, giving the Nexis hinge a defined landing point tied directly to the frame. The clip-on design affixes the hinge to the plate, so you can connect or release the door at the plate without touching the screws holding the plate to the cabinet. Plus or minus 2 mm of height adjustment is built in through elongated screw holes, meaning you can slide the plate up or down relative to the cabinet side to refine top and bottom gaps. Using #6 x 5/8 inch flat head screws keeps the head flush in the slots, so the hinge sits flat on the plate and adjustment travel stays usable.
This Nexis adjustable face frame mounting plate with 4mm plate height sets the hinge-to-face frame spacing that establishes door overlay geometry on face frame cabinets. As part of the Nexis face frame adapter plates family, it is intended to work with Nexis hinges that attach through the clip-on design, so the plate becomes the fixed anchor while the hinge hardware handles door movement. The plate fastens to the cabinet side with #6 x 5/8 inch flat head screws, creating a secure link between the cabinet box and the hinge system across the life of the installation. Because the body is die-cast steel, the plate resists deformation at the clip-on area and around the screw holes, helping the assembly maintain alignment when doors are opened and closed repeatedly in typical cabinet use.
The plus or minus 2 mm of height adjustment built into the elongated screw holes lets you shift the Nexis face frame adapter plate relative to the cabinet side, so you can correct small layout variances and align door tops across a bank of cabinets. Nickel-plating on the mounting plate provides a durable finish at the adjustment slots and clip-on contact points, so screws and hinge clips bear on a hard surface that helps preserve smooth adjustment travel. The clip-on interface between plate and hinge concentrates connection at a defined zone on the die-cast steel body, so the hinge locks to a solid, non-flexing base that promotes repeatable door positioning when reinstalling a door onto the same plate. Set within the Hinge Mounting Plates category and branded by Grass America, the plate signals a purpose-built component sized and finished for cabinet hinge use where consistent adjustment and stable door support matter on every job.
The Nexis face frame adapter plate serves face frame cabinets, giving Nexis hinges a mounting interface tied to the frame so door reveals relate directly to the face frame layout.
The clip-on design lets the hinge affix to the plate without disturbing mounting screws, so doors can be hung or removed while keeping the plate location stable on the cabinet.
The face frame adapter plate provides plus or minus 2 mm of height adjustment through elongated screw holes, so you can fine-tune vertical door gaps against the face frame.
The Nexis adjustable face frame mounting plate attaches to the cabinet side using #6 x 5/8 inch flat head screws, so it works with a commonly stocked cabinet screw size.
The 4mm plate height sets the hinge position relative to the face frame, so it helps define the resulting door overlay and reveal pattern in a Nexis hinge installation.
The nickel-plated, die-cast steel construction gives a hard, corrosion-resistant, rigid base, so the hinge connection and adjustment slots stay stable during repeated cabinet use.
The Nexis adjustable face frame mounting plate from Grass America combines a 4mm plate height, clip-on hinge connection, and plus or minus 2 mm height adjustment, so it supports precise door reveals on face frame cabinets. Die-cast steel construction with a nickel-plated finish provides a solid, corrosion-resistant base tied to the cabinet side by #6 x 5/8 inch flat head screws, so the hinge connection remains stable. When a project calls for a Nexis face frame adapter plate that aligns directly with Nexis hinges and face frame layouts, this hinge mounting plate matches that role.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 30000 Each | WW54400 Mfr# 367000042096130000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 367000042096130000 - 30000/Box | ||||
Sold in: 1000 Each | WW41900 Mfr# 3670000121961 1000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000121961 1000 - 1000/Box | ||||
Sold in: 100 Each | BP606N100 Mfr# 606N-100 | Blum #6 x 5/8" Flat Head Wood Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 28004573 - 100/Box |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GF346.290.88.0015 Mfr# F061073275236 | Nexis Adjustable Face Frame Mounting Plate, Nickel-Plated, Screw-On, 0mm |