PRO Value PRO100 10-Pair Box 16" Side Mount Full Extension 100 lb Ball Bearing Drawer Slide, Zinc, 0684075044961 10

Zinc Finish and Full-Extension Fit in a 16 Inch Workhorse Slide

The Pro Value PRO 100 is a 16 inch full-extension side-mount ball bearing drawer slide with a bright zinc finish, rated 100 lb per pair. It brings the entire drawer out to the cabinet face and stays out of the way — no decorative finish to worry about matching, just a clean zinc-plated steel slide that does its job in kitchen, bath, office, or shop builds.

Key Features

• Full extension brings the complete drawer clear of the cabinet opening, so nothing stays hidden at the back.
• 100 lb weight rating per pair handles a loaded kitchen or utility drawer with headroom to spare.
• Bright zinc finish provides indoor corrosion resistance on a slide that sits beside the drawer box where finish consistency matters less than durability.
• Non-handed design means both slides in the pair are identical, cutting sorting time on the bench.
• Standard motion — no self-close, no soft-close, and no detent — so the drawer stays wherever it is left.
• Ball bearing construction on steel members delivers smooth, consistent travel run after run.

Where the 16 Inch Length Fits

A 16 inch slide suits shallow cabinet runs: bathroom vanity drawers, base cabinets with a smaller footprint, and desk pedestals where the interior depth is limited. The slide's nominal 16 inch length sets the outer dimension — the cabinet interior needs to be deep enough to seat it, and the drawer box is built to match. Full extension means every inch of that drawer is reachable when open, which matters in a shallow drawer where nothing should get buried. For face-frame cabinets, the rear of the slide needs support: add the appropriate rear mounting brackets, sold separately, to carry the back end of the slide where the cabinet side is set back from the frame.

Steel and Zinc Built for Indoor Work

Cold-formed steel members carry a bright zinc electroplated finish — the standard material and finish combination across production cabinet hardware. Zinc protects the steel through years of daily cycling in a dry indoor environment. It is not a decorative finish and it is not rated for wet or outdoor conditions, which makes it the right call for interior cabinetry where the slide is tucked beside the drawer box and rarely seen. The ball bearings ride in full-length formed raceways so travel stays smooth under load without maintenance.

The Right Slide for Volume Cabinet Work

Cabinet shops and contractors running production builds reach for the PRO 100 when the spec calls for a reliable 100 lb full-extension side mount at a consistent price point. At 16 inches, this is the length for vanity banks, shallower base cabinets, and smaller office drawers. Homeowners retrofitting a drawer in an existing cabinet will find the non-handed format forgiving — one pair covers both sides without ordering a left and a right. The standard-motion format also makes this slide a solid base for push-to-open retrofit hardware, since there is no closing mechanism to work against.

A Dependable Pair Ready for the Next Drawer

The Pro Value PRO 100 at 16 inches gives production shops and careful DIYers a full-extension, 100 lb rated side-mount slide in zinc — straightforward specs, honest capacity, and a non-handed format that keeps the install moving.