PRO Value PRO100 10-Pair Box 10" Side Mount Full Extension 100 lb Ball Bearing Drawer Slide, Zinc, 0684075041961 10

Pro Value PRO 100 Zinc Drawer Slides for Compact Cabinet Drawers

The Pro Value PRO 100 is a 10 inch full-extension side-mount ball bearing drawer slide, rated 100 lb per pair, finished in zinc. Built for shallow drawers in face-frame and frameless cabinets, this slide brings full rear access to spice pullouts, small utility drawers, and compact storage compartments where a longer slide simply will not fit.

Key Features

• Full extension brings the entire drawer out to the cabinet face, so nothing hides at the back of a shallow box.
• 100 lb weight rating per pair handles loaded small drawers without overspecifying hardware.
• Steel ball bearings in full-length raceways deliver smooth, consistent travel even in a compact slide profile.
• Non-handed design means both slides in the pair are identical — no sorting left from right on the bench.
• Zinc finish provides standard indoor corrosion resistance on a side-mount slide that sees everyday use.
• 1/2 inch side clearance per side matches the standard drawer box formula for side-mount installations.

Where a 10 Inch Slide Does the Job

Not every drawer is deep. Spice drawers, knife blocks, tray storage, and shallow utility compartments call for a short slide that delivers real full-extension performance without wasted hardware. At 10 inches, this slide suits cabinet runs where the interior depth is limited and a standard 18 or 22 inch slide would overhang the back panel. The PRO 100 series uses the 32mm system hole pattern, so it drops straight onto a line-bored panel in a frameless cabinet. In face-frame construction, plan for rear mounting bracket support at the back of the slide — those brackets are sold separately and are series-specific.

Steel Construction and Zinc Finish

The slide members are cold-rolled steel with a bright zinc finish. Zinc is the working standard for indoor side-mount ball bearing slides: it protects the steel through years of cycling without adding bulk or changing the 1/2 inch clearance requirement. This is a functional finish on hardware that sits beside the drawer box, mostly out of sight once the drawer is in. The standard-motion design means there is no closing mechanism — no self-close spring, no soft-close damper. The drawer rides the bearings and stays where it is left.

The Right Fit for Volume Cabinet Work

The PRO 100 is the face-frame-ready variant in the Pro Value side-mount line. Its front slotted hole allows direct mounting to a face frame when the layout calls for it. Cabinet shops running high drawer counts in compact furniture, vanities, or utility cabinets can standardize on this slide for all the short-drawer positions in a project and keep ordering simple. Because the slide is non-handed and sold as a pair, there are no handed components to track and no minimum order complexity beyond the pair count the job requires.

Full-Extension Performance Where Space Is Short

A 10 inch full-extension ball bearing slide solves the problem that longer slides cannot: it fits the shallow cabinet and still pulls the whole drawer clear. The PRO 100 delivers that in zinc-finished steel at a 100 lb rating, with no left-right complexity and a face-frame-ready front slot built in.