Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Pro Value PRO 100 is a 26 inch full-extension side-mount ball bearing drawer slide rated 100 lb per pair, finished in bright zinc. At 26 inches, this is the length that suits deep base cabinets, pantry pull-outs, and storage drawers where shorter slides leave the back of the drawer unreachable. Sold as a pair, it arrives ready to install on either side of the box.
Deep base cabinets, tall pantry units, and full-depth utility drawers are where a 26 inch slide pays off over a shorter length. With full extension, the intermediate member carries the drawer box completely clear of the cabinet opening, putting the rear contents within reach without stretching. That matters most in a base cabinet run where a shorter slide would leave the back quarter of the drawer inside the case. Standard motion keeps things straightforward on drawers that are opened and left in use — a workshop parts bin, a pantry roll-out, or a base cabinet drawer that stays open while you work.
The PRO 100 is cold-rolled steel with a bright zinc electroplate. Zinc is the standard protective finish for side-mount ball bearing slides: it guards the steel through years of indoor service without adding bulk or changing the fit. This is a functional, visible-when-open finish — it is not decorative and not rated for damp or outdoor environments. The slide members are sized to work with the 1/2 inch clearance that is standard across this load class.
Cabinet shops building deep base runs, contractors fitting pantry units, and homeowners tackling a full kitchen renovation all reach for a 26 inch slide when the cabinet depth calls for it. The PRO 100 is the volume-friendly choice: full extension and a 100 lb rating at value pricing, non-handed so one part number covers both sides, and inventoried locally for reliable availability. The PRO 100 also carries a slotted front mounting hole suited to face-frame cabinet work; in face-frame installs, rear mounting brackets are required and sold separately. For frameless cabinets, the slide mounts directly to the side panel.
The 26 inches is the closed slide length. Because this is a full-extension slide, the drawer member travels approximately the full slide length, bringing the whole drawer out to the cabinet face — those are related but separate specs.
Neither. The PRO 100 is a standard-motion slide — the drawer rides the ball bearings freely and stays where it is left. There is no damper, spring, or detent. If you need soft-close on a 26 inch side-mount slide, look at the Fulterer FR 5001 or Knape and Vogt FM soft-close series.
Build the drawer box 1 inch narrower than the cabinet opening to leave 1/2 inch clearance for each slide. The PRO 100 series recommends a maximum drawer width of 24 inches; for wider drawers, step up to a slide rated for a wider span.
One pair of slides — both members identical since the design is non-handed.
Yes. In face-frame construction the cabinet side is set back from the face, so the back end of the slide needs support. The PRO 100 accepts fixed and floating rear mounting brackets sold separately; for frameless cabinets no brackets are needed.
When the cabinet is deep and the drawer needs to come all the way out, the 26 inch PRO 100 pair is the straightforward choice — full extension, 100 lb rating, zinc finish, and a non-handed design that simplifies both ordering and installation.
Sold In: 10 Pair
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 2 Each |  DSPRO100RB Mfr# 0684075051961 100 | PRO Value PRO100 Rear Mounting Bracket, 0684075051961 100 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW46000 Mfr# 3670000235961 1000 | Würth #8 x 7/16" Truss Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000235961 1000 - 1000/Box |
