PRO Value PRO100 10-Pair Box 20" Side Mount Full Extension 100 lb Ball Bearing Drawer Slide, Zinc, 0684075046961 10

Zinc-Finished Full-Extension Slides Built for Volume Cabinet Work

The Pro Value PRO 100 is a 20 inch full-extension side-mount ball bearing drawer slide, sold as a pair, rated 100 lb per pair. It is the straightforward choice for production cabinet shops and contractors who need a reliable full-extension slide in quantity without paying for features they do not need.

Key Features

• Full extension brings the entire drawer out to the cabinet face so nothing in the back stays hidden.
• 100 lb weight rating per pair covers a loaded kitchen, bath, or utility drawer with room to spare.
• Steel ball bearings run in full-length raceways for smooth, consistent travel cycle after cycle.
• Non-handed design means both slides in the pair are identical — no sorting left from right on the bench.
• Bright zinc finish protects the steel members for years of indoor service without adding visible bulk.
• Standard motion — no closing mechanism — so the drawer stays exactly where you leave it.

Where These Slides Fit Best

A 20 inch slide length suits cabinet runs where drawer depth is in the 18 to 20 inch range — typical for base cabinets and utility drawers in kitchens, baths, laundry rooms, and light commercial millwork. The 100 lb per pair rating handles everyday loads: pots and pans, tools, hardware bins, or a bathroom vanity drawer. Because the slide is full extension, the whole interior opens up at the cabinet face, which matters in base cabinets where the back of the drawer is otherwise hard to reach. Standard motion means there is no self-close or soft-close mechanism working against you — a practical choice in shops where push-to-open retrofits or custom closing solutions will be added later.

Materials and Finish

The members are cold-rolled steel with a bright zinc electroplate finish. Zinc is the working standard for this slide class: it resists the corrosion of a dry indoor environment and keeps the members moving cleanly without adding surface roughness or visible weight. The finish is functional rather than decorative — these slides sit beside the drawer box and are mostly out of sight once the drawer is installed. This is an indoor slide; it is not rated for exterior, damp, or wet environments.

The Right Fit for Production Volume

Cabinet shops running production quantities benefit from a non-handed slide that installs the same way every time. The PRO 100 ships as a complete pair with mounting hardware on the 32mm hole pattern, so it drops straight onto line-bored panel work in frameless cabinets. In face-frame cabinets, rear mounting brackets are required to support the back of the slide — these are sold separately and are series-specific. The 1/2 inch side clearance per side is standard for this class: build the drawer box 1 inch narrower than the opening and both slides seat correctly. The lever disconnect lets the drawer be removed without tools for finishing, delivery, or service.

Common Questions

A Pair That Keeps the Job Moving

Full extension, 100 lb capacity, non-handed, zinc finish, standard motion: the PRO 100 covers the core spec for most production cabinet drawers in a single line item, so the shop floor spends less time sorting hardware and more time installing it.