Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
#8 x 1-3/4 flat head assembly screw gives you a case hardened fastener for structural assembly work, so joints stay tight under load in typical woodworking and cabinet applications. The sharp point coarse thread design lets the screw cut into material efficiently, which helps the screw pull parts together firmly during driving. The flat head profile seats flush with the surface when properly driven, which supports clean installations where a fastener should not sit proud. The lubricated finish helps the screw drive more smoothly into material, which can reduce driving torque during repetitive installation. This assembly screw is part of the Wurth fastener line, so it matches the product range many shops already use for woodworking projects. The screw is described as a combo drive style, so installers can choose a compatible driver based on the tooling already in service.
The threading detail notes that 3/4 inch and 1 inch lengths are fully threaded while other sizes are threaded two-thirds from the bottom of the screw, which affects how the screw clamps materials together across different thicknesses. This #8 x 1-5/8 flat head assembly screw follows that length-based threading pattern, so longer sizes use partial thread to help draw pieces tightly while still allowing movement near the head. The product description states that #2 square drive bits are used to insert the screw, which gives installers a positive engagement option for primary installation. It also notes that #2 Phillips drive bits can be used for aftermarket adjustment, which can be helpful when field service or minor repositioning is required using commonly available bits.
This Wurth #8 x 1-5/8 flat head assembly screw sits in the Fasteners and Screws category, which positions it for woodworking and cabinet-related fastening tasks. The sharp point coarse thread description means it is suited to driving into typical wood-based materials where a cutting tip and aggressive thread improve pull-down. The flat head layout lets the screw nest into countersunk holes, which supports applications where a covering material, hinge plate, or hardware component rests over the fastener location. Because the product is part of the Wurth Baer Supply offering to the woodworking industry, it aligns with the fastener expectations of professional shops already using Wurth screws and related products on production lines.
The case hardened specification gives this screw a harder surface layer, which supports consistent driving without rounding the drive recess as quickly under powered tools. The combo drive description, with #2 square bits for insertion and #2 Phillips bits usable for aftermarket adjustment, allows installers and service techs to work with the same screw using different common bit styles. The lubricated surface treatment reduces friction as the sharp point coarse thread advances, which helps maintain steady driving speed and can support more uniform seating depth across a run of fasteners. The defined threading scheme, where 3/4 inch and 1 inch lengths are fully threaded and other lengths are threaded two-thirds from the bottom, helps installers predict how the screw will clamp the joint and where unthreaded shank will sit inside the stack. Together, these verified details support repeatable fastening results across similar assemblies.
This Wurth #8 x 1-5/8 flat head assembly screw uses #2 square drive bits for insertion, which supports firm bit engagement during primary installation.
This assembly screw can be driven with #2 Phillips drive bits for aftermarket adjustment, which helps when service work relies on common Phillips tooling.
The product description notes that 3/4 inch and 1 inch lengths are fully threaded, while all other sizes are threaded two-thirds from the bottom of the screw.
This assembly screw is case hardened, giving a tougher outer layer that supports driving into material with reduced risk of deforming the head recess.
The lubricated description indicates a treated surface that reduces friction, which helps this screw drive more smoothly and consistently into typical woodworking materials.
The sharp point coarse thread layout suits this screw to wood-based assemblies, where the point cuts into the material and the coarse pitch pulls components together firmly.
This Wurth #8 x 1-5/8 flat head assembly screw combines a sharp point coarse thread, case hardened construction, and lubricated surface, so it supports efficient driving and firm pull-down in woodworking assemblies. The defined threading scheme across lengths and the combo drive capability with #2 square insertion and #2 Phillips aftermarket adjustment let installers and service teams work predictably with the same fastener. For shops drawing from the Wurth Baer Supply fastener range, this screw fits into an established product family used throughout the woodworking industry.
Sold In: 1000 Each
