#8 x 2-3/4 flat head assembly screw describes a Wurth case hardened, lubricated screw built for wood working applications such as assembly, face frames, slides, hinges, and hardware, so a single fastener type can serve multiple shop tasks. The patented serrated tooth turbo thread allows for quick starting, which helps the screw bite into wood rapidly during driving. That same turbo thread design reduces splitting, so installers can fasten near edges and joints with less wood damage risk. The thread pattern also allows for less drive torque, which eases driving effort and helps extend tool life in repetitive fastening. This screw uses a sharp point, so it penetrates wood without pre-drilling in many woodworking setups. The flat head style lets the screw sit flush in countersunk holes, supporting clean cabinet and furniture assembly.
This Wurth screw uses a combo drive system: it uses #2 Square Drive bits to insert, and #2 Phillips Drive bits can be used for after market adjustment. That means installers can drive the screws with square drive bits for positive engagement, then later adjust with widely available Phillips #2 drivers if needed. The screw specification states that 3/4 inch and 1 inch lengths are threaded fully, while all other sizes are threaded two-thirds from the bottom of the screw, so this length follows the partial thread pattern that helps pull materials together without over-threading the upper shank. The flat head configuration seats into countersinks to create a flush surface, supporting smooth fit for hinges, slides, and hardware alignment.
This Wurth #8 x 2-3/4 inch flat head assembly screw is specified for use in all wood working applications, covering assembly, face frame construction, slides, hinges, and hardware. That broad application range lets shops standardize on one screw across many stations. In cabinet assembly, the sharp point and turbo thread support quick starting into face frame parts and case components. On slides and hinges, the flat head sits neatly in countersunk holes, supporting hardware alignment. The case hardened construction helps the screw handle driving stress during installation. Because this screw is lubricated, driving into various wood substrates remains smoother, which supports consistent seating depth across a run of cabinets or furniture pieces. The design aims at repetitive, production-minded woodworking scenarios where speed and consistency are important.
The patented serrated tooth turbo thread allows for quick starting, reduced splitting, and less drive torque, which directly affects daily workflow when many screws are driven per project. Quick starting reduces wandering at the bit tip, so fasteners hit their marks more reliably. Reduced splitting helps preserve strength when fastening near ends or into narrower rails and stiles. Less drive torque means drivers work less aggressively, supporting smoother control and potentially lowering user fatigue over repeated cycles. The combo drive design, using #2 Square Drive bits for insertion and allowing #2 Phillips Drive bits for after market adjustment, adds flexibility in the field or shop. Installers can rely on solid square drive engagement during production assembly, then perform later service or alignment with common Phillips tools when hardware or components require adjustment.
The Wurth #8 x 2-3/4 inch flat head assembly screw is specified for all wood working applications, including assembly, face frames, slides, hinges, and hardware, so it can serve many cabinet and furniture tasks.
The patented serrated tooth turbo thread allows for quick starting, reduced splitting, and less drive torque, which supports faster driving, cleaner edges, and smoother tool performance in repeated use.
The screw uses #2 Square Drive bits to insert, while #2 Phillips Drive bits can be used for after market adjustment, giving installers flexibility in both production and service situations.
The product data states 3/4 inch and 1 inch lengths are threaded fully and all other sizes are threaded two-thirds from the bottom, so this 2-3/4 inch length follows the partial-thread pattern.
The screw is case hardened and lubricated, which supports strength under driving loads while the lubrication promotes smoother insertion and more consistent seating into wood.
The screw uses a sharp point that penetrates wood readily, so it engages material quickly and supports efficient driving across general wood working applications.
This Wurth #8 x 2-3/4 inch flat head assembly screw with patented serrated tooth turbo thread is designed for all wood working applications, covering assembly, face frames, slides, hinges, and hardware. The case hardened, lubricated construction supports strength and smooth driving. The combo drive system using #2 Square Drive bits for insertion and allowing #2 Phillips Drive bits for after market adjustment provides flexibility in both shop and field work. For projects standardizing on a #8 x 2-3/4 inch length with turbo thread performance, this Wurth screw offers a consistent specification for repetitive cabinet and woodworking tasks.
Sold In: 1000 Each
