Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster 3 inch gives you a compact, stem mounted caster from Wurth Baer Supply that supports up to 100lb capacity, so light carts, fixtures, or cabinets roll smoothly without overloading the hardware in normal shop or jobsite use. The caster uses a threaded stem mount in the threaded stem mount product class, which lets the wheel secure directly into a compatible threaded receiver on your project instead of needing a separate plate, simplifying layouts where space around the mounting point is tight. The caster is a swivel type, so the wheel rotates around a vertical axis and allows easy changes in direction when moving equipment through tight aisles or around benches. The SAP description calls out 3'THRDED STEM,NON-MARKING,SWIVEL 100LBS, tying together the 3 inch wheel size, non-marking wheel material, swivel action, and load rating into one matched caster choice.
The web description specifies two stem sizes available: 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length, so stem dimensions can match common threaded receivers or inserts in light-duty furniture or carts. Because the product class is threaded stem mount, the stem is the primary connection point, which concentrates the load through the threaded interface and helps keep the caster centered under the leg or frame member. Being a swivel caster, the vertical stem axis also serves as the rotation point, so correct stem fit helps the caster track cleanly when changing direction or pivoting equipment. The category listing as stem mounted casters underscores that this caster is intended for applications built around a stem mounting pattern rather than a top plate layout.
The product sits in the builders hardware category under stem mounted casters, so it fits into general hardware use around woodworking shops or similar environments where light mobile bases or cabinets benefit from threaded stem mounts. The SAP description identifies the caster as 3'THRDED STEM,NON-MARKING,SWIVEL 100LBS, so it targets lighter-duty uses where a 3 inch wheel and 100lb capacity provide adequate support for individual corners of small carts, display pieces, or jigs. The web description notes availability with or without brakes, indicating the caster series can support both free-rolling and braked positions where control at rest matters, such as locking a cart during machining or assembly. The mention of rubber and non-marking rubber (gray) means the caster line addresses both general-purpose and mark-sensitive floors, so the same product family suits varied shop or finished-room locations.
The product class of threaded stem mount means the stem threads carry both vertical load and side forces as the caster swivels, so matching the stem size to the receiving thread helps keep the caster firmly aligned and reduces unwanted play at the mounting point. The web description lists stem sizes of 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length, dimensions that align with common tapped inserts and brackets, which helps installers standardize drilled holes and inserts across multiple pieces. The web description also calls out an embossed zinc plated yoke, so the caster frame has a zinc finish that resists normal shop humidity and handling, which matters for maintaining smooth swivel function over time. The 100lb capacity stated in both the product name and SAP description clarifies the rated load per caster, so load planning for small fixtures can allocate weight across casters with a clear numeric target.
The C-L30T2MS caster uses a threaded stem mount in the threaded stem mount product class, so the caster installs by threading the stem into a compatible receiver instead of using a top plate.
The DH Casters swivel caster 3 inch is rated for 100lb capacity, so each caster can support up to 100lb when distributing weight on a light-duty cart or cabinet corner.
The web description lists two stem sizes: 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length, covering two common threaded stem dimensions.
The non-marking rubber (gray) option described in the web description is designed to roll without leaving marks, which is useful on finished or decorative floor surfaces.
The SAP description identifies the caster as SWIVEL, so the wheel rotates around a vertical axis, helping equipment turn or pivot in tight shop or room layouts.
The web description notes an embossed zinc plated yoke, so the caster frame has a zinc coating that supports resistance to typical shop moisture and handling.
The DH Casters swivel caster 3 inch combines a threaded stem mount, 100lb capacity, and a non-marking rubber option, so it aligns with light-duty carts or cabinets that need directional swivel and floor-friendly rolling. With stem sizes listed as 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length, the caster connects to common threaded receivers, which streamlines matching casters to existing legs or brackets. For projects built around stem mounted casters, the embossed zinc plated yoke and non-marking option create a practical hardware choice when specifying casters through Wurth Baer Supply.
Sold In: 1 Each
