Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster is a stem mounted caster with a 2 inch rubber wheel and brake, so it supports small cabinets or fixtures that need smooth rolling and positive stopping in tight shop or jobsite spaces. The threaded stem mount is part of the threaded stem mount product class, so this caster is designed to fasten into a mating threaded component for a secure connection that resists loosening under normal rolling loads. The DH Casters brand and C-L20T1RSB part number identify a consistent, repeatable caster spec, which matters when matching existing units or planning multi-point mounting layouts. The wheel is available in rubber in black and non-marking rubber in gray, giving options between traditional rubber and a floor-friendly gray tread when marking is a concern. This caster is listed with a 77lb capacity, so it suits light-duty applications where each mounting point carries modest loads.
This threaded stem swivel caster belongs to the threaded stem mount product class, so mounting is based on engaging the stem into a compatible threaded component rather than a plate. The web description specifies two stem sizes: 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length, so projects can be planned around either stem diameter and thread detail when aligning with pre-tapped material or threaded inserts. The stem mount style keeps the footprint compact at each corner of a cabinet or frame, which helps when clearance around corners or legs is limited. Because the caster is stem mounted and swivel type, once the stem is secured, the assembly can rotate to follow the direction of travel without changing the mounting orientation.
The C-L20T1RSB part from DH Casters is categorized under stem mounted casters, so it suits installations where a threaded socket or similar receiver is already part of the cabinet, fixture, or frame design. The available stem sizes of 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length help match typical threaded provisions found in light-duty woodworking or fixture bases. The 2 inch rubber wheel size keeps overall height modest, which can be important when casters are added under existing cabinets or carts where working height must stay close to original dimensions. The combination of a swivel yoke and brake lets a single caster both steer and hold position, so small work carts or shop fixtures can be repositioned and then stabilized in the same footprint.
The caster is described as a swivel caster with brake and a 2 inch rubber wheel, so the wheel can rotate for directional changes while the brake adds holding force once the piece is in place. The embossed zinc plated yoke means the swivel housing is zinc plated, so the rotating joint and fork are better protected from surface rust in typical indoor conditions, which supports smoother swiveling over time. The 77lb capacity rating gives a concrete per-caster load figure, which helps when planning how many casters support a light-duty cabinet or small cart frame. Because the wheel options are black rubber and non-marking gray rubber, the same basic caster format can be applied in areas where dark marks on finished floors are a concern or where a darker wheel appearance is preferred. The threaded stem mount class also means that once the mating thread is selected, caster removal and replacement revolve around simply unthreading and threading the stem, which can streamline future fixture changes that keep the same thread standard.
The C-L20T1RSB caster part number identifies a DH Casters swivel caster with 2 inch rubber wheel, brake, and threaded stem mount, so repeat orders match the same configuration.
The 77lb caster capacity defines the load this swivel caster is designed to support, guiding how many casters are used under light-duty cabinets or fixtures.
The threaded stem mount lets the caster screw into a matching threaded component, creating a compact connection that secures the swivel caster to the structure.
This caster is available with stems in 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length for different threaded interfaces.
The wheel is available in black rubber and non-marking gray rubber, so installers can match either a traditional tread or a floor-friendly gray wheel in finished areas.
The embossed zinc plated yoke gives the caster a zinc-coated swivel housing, helping the metal resist surface corrosion and supporting ongoing smooth rotation.
This DH Casters swivel caster with 2 inch rubber wheel, brake, and threaded stem mount brings together a defined 77lb capacity, zinc plated yoke, and specific stem sizes, so light-duty cabinets, carts, or fixtures can be planned around a known mounting thread and load rating. By choosing between black rubber and non-marking gray rubber wheel options, the same base caster format can support shop fixtures or finished interior pieces while addressing flooring appearance and movement control needs.
Sold In: 1 Each
