DH Casters Swivel Caster With 3" Hard Rubber Wheel No Brake, Threaded Stem Mount 100lb Capacity - C-L30T1RS

DH Casters Swivel Caster For Light Duty Mobility

DH Casters swivel caster with a 3 inch hard rubber wheel provides directional flexibility for light duty rolling applications, which helps move equipment smoothly in tight or frequently used spaces. The threaded stem mount is a threaded stem design in the threaded stem mount product class, so you can fasten it into a matching 5/16-18 tapped socket for a secure connection on carts or stands. A load capacity of 100 lb sets a clear working range for office equipment, light medical stands and carts, chairs and stools, and store fixtures where light duty support is appropriate. The gray rubber wheel type defines how the caster contacts the floor, which matters where a firm but somewhat compliant tread is preferred. This caster is part of the stem mounted casters category, so it suits builds where you prefer a vertical stem instead of a top plate.

Key Light Duty Caster Details For Projects

• The swivel type is a swivel caster design, which lets equipment rotate and change direction without lifting, helping carts and fixtures maneuver around obstacles and through busy areas.
• The 3 inch wheel diameter sets the rolling height and clearance, which helps installers plan platform heights and step-in transitions on office equipment, chairs, stools, and store fixtures.
• The tread width of 13/16 inch defines the contact patch of the gray rubber wheel, which affects how the load is distributed on the floor and how the caster tracks under lighter loads.
• The mounting type is a threaded mounting type with a 5/16-18 x 1 inch thread size, so fabricators can match this stem to a properly sized threaded insert or nut in their frames.
• The load capacity of 100 lb specifies the intended working load per caster, which helps builders size the number of casters needed to support office equipment and light medical carts.
• The caster is categorized as a light duty caster, which aligns it with applications where moderate movement and frequent repositioning matter more than heavy static loading.

Threaded Stem Swivel Mounting And Fit Details

The mounting type for this caster is a threaded stem design in the threaded stem mount class, so you thread the 5/16-18 x 1 inch stem into pre-tapped holes or matching nuts to secure the caster. This threaded stem interface centralizes the load through the stem, which suits tube frames or fixtures where a vertical attachment point already exists. The swivel construction is a doubleball bearing swivel, which allows the caster fork to turn smoothly under load as you push or pull equipment. A riveted axle holds the 3 inch gray rubber wheel in the fork, which keeps the wheel centered for consistent tracking in regular movement cycles. The wheel type is gray rubber with a hard rubber description, giving a firm rolling surface in common shop or facility environments.

Using This Stem Mounted Caster In Real Builds

Where This DH Casters Swivel Caster Fits Best

This caster is listed for applications such as office equipment, light medical stands and carts, chairs and stools, and store fixtures, so it suits projects where equipment is repositioned frequently but stays within a light duty load profile. The 100 lb load capacity per caster helps designers distribute weight when planning multi-caster bases for these pieces, supporting predictable performance when stands or fixtures are fully outfitted. The 3 inch wheel diameter keeps overall unit height modest, which is useful on chairs, stools, and low carts where seating height or reach needs to stay within familiar ranges. The gray rubber wheel type offers a distinct tread material compared to metal or plastic, which matters where a rubber wheel style is preferred on facility floors. Being part of the stem mounted casters category, this design fits builds that already use vertical stem sockets rather than top plate mounting hardware.

Why These Caster Details Support Consistent Results

The doubleball bearing swivel construction helps the caster rotate under load, which reduces steering resistance when moving carts or stands through tight spaces or around equipment. A riveted axle secures the 3 inch wheel in the fork, which keeps the wheel firmly positioned for repeatable rolling behavior over the caster's working life. The threaded 5/16-18 x 1 inch stem size defines the exact interface for the mounting point, letting fabricators standardize holes and fittings across multiple units of office equipment or medical carts. Zinc plating provides corrosion resistance on the metal components, which supports performance in typical indoor environments where occasional moisture or cleaning solutions are present. The combination of gray rubber wheel type, tread width of 13/16 inch, and light duty classification focuses this caster on everyday movement rather than heavy industrial loads, which supports smoother rolling in the listed applications. The absence of a brake on this swivel caster simplifies the design, which suits installations where free-rolling movement and quick positioning are more important than wheel locking.

Common Questions About This DH Casters Swivel Caster

Selecting This Caster For Light Duty Mobility

The DH Casters swivel caster with a 3 inch hard rubber wheel, 5/16-18 x 1 inch threaded stem, and 100 lb load capacity offers a clear set of parameters for light duty mobility projects. When building or updating office equipment, light medical stands and carts, chairs and stools, or store fixtures within this load range, this threaded stem mount design pairs swivel capability with gray rubber tread and zinc plated metal components. For projects matching these dimensions and applications, this caster provides a defined option for consistent movement.