DH Caster 3" Threaded Stem Mount Swivel Caster, Rubber, With Brake, 100 lb, C-L30T1RSB

DH Casters Swivel Caster For Mobile Fixtures

DH Casters swivel caster with 3 inch hard rubber wheel with brake gives office equipment, light medical stands and carts, chairs and stools, and store fixtures controlled movement under a defined load. The swivel type design lets the caster rotate as equipment is moved, which helps when positioning fixtures in tighter spaces on the job. A zinc plated finish provides corrosion resistance, which supports service in typical indoor work environments where moisture or cleaning chemicals may contact hardware. The 100 lb load capacity defines how much weight one caster is designed to carry, guiding how many units are used under a piece of equipment. A gray rubber wheel material provides a defined tread surface, which affects how the caster rolls across common floors in offices, stores, and medical areas. The threaded stem mount class organizes this caster with stem-mounted hardware used where a post-style connection is required.

Key Caster Details That Support Daily Use

• The 3 inch wheel diameter sets the contact size with the floor, which influences how easily office equipment, chairs, and store fixtures roll over typical small irregularities during repositioning.
• A tread width of 13/16 inch defines the footprint of the wheel on the floor, which affects how load is distributed on finished surfaces in commercial and shop environments.
• The wheel type is gray rubber, which determines the contact material against common hard floors in offices and medical settings and influences rolling feel under changing loads.
• A load capacity of 100 lb per caster provides a defined weight rating, which supports planning how many casters are used under light stands, carts, and fixtures.
• The swivel type uses a doubleball bearing swivel, which allows smooth rotation of the wheel assembly as equipment changes direction along aisles or around work areas.
• A riveted axle secures the wheel to the caster body, which creates a fixed rolling pivot point for repeatable movement under the specified load capacity.

Threaded Stem Mounting And Brake Function

This threaded stem mount caster uses a threaded stem in the 5/16-18 x 1 inch size, providing a defined interface for installations designed around that thread specification. The threaded stem mount product class groups this caster with hardware intended for threaded stem connections instead of plate mounting. A hard rubber wheel with brake allows the user to apply resistance at the wheel, which helps hold office equipment, light medical stands and carts, or store fixtures when stationary. The zinc plated finish on the caster body adds corrosion resistance around the stem and swivel components, which supports continued turning and braking performance in typical interior environments. The swivel configuration means that once threaded into the receiving component, the caster can still rotate freely under load for maneuvering.

Using This Threaded Stem Caster In Practice

Where This Threaded Stem Mount Caster Fits

This threaded stem mount caster is in the builders hardware category under stem mounted casters, placing it among components used to add mobility to equipment frames. The product class is threaded stem mount, aligning it with receiving parts that accept a 5/16-18 x 1 inch threaded stem. Applications listed for this caster are office equipment, light medical stands and carts, chairs and stools, and store fixtures, so its details support common rolling tasks in those environments. The 3 inch wheel diameter and 13/16 inch tread width pair to create a compact caster size suited to these types of fixtures without adding excessive height. Gray rubber wheel construction provides a defined tread material for contact with hard flooring in offices, stores, and medical areas, where smooth rolling and predictable tracking are important during repositioning.

Why These Swivel Caster Details Matter On The Job

The DH Casters swivel caster with 3 inch hard rubber wheel with brake uses a doubleball bearing swivel, which supports smoother pivoting as loaded fixtures change direction along aisles or around obstacles. A riveted axle keeps the wheel aligned to the caster body, supporting consistent rolling under the rated 100 lb load capacity. That 100 lb rating per caster gives installers and builders a clear reference when determining caster count for equipment within the light-duty range listed in the product description. Zinc plated construction adds corrosion resistance throughout the caster body and stem, which supports continued operation of the swivel and brake functions in typical building interiors. The 5/16-18 x 1 inch threaded stem size creates a repeatable mounting interface for frames and sockets tapped for that thread, which matters when replacing or standardizing casters across chairs, stools, or carts. The integrated brake on the hard rubber wheel gives users a way to restrict wheel movement once equipment is positioned, which helps maintain location for office equipment, light medical stands and carts, and store fixtures during use.

Common Questions About This DH Casters Caster

Selecting This Caster For Light-Duty Mobility

This DH Casters swivel caster with 3 inch hard rubber wheel with brake combines a 100 lb load capacity, gray rubber tread, and a 5/16-18 x 1 inch threaded stem for defined mounting and movement. For office equipment, light medical stands and carts, chairs and stools, and store fixtures built around threaded stem mounts, these specifications outline how the caster will behave under load and during repositioning. Use the listed dimensions, wheel type, and load rating as the basis for choosing this threaded stem mount caster when planning mobility for light-duty fixtures.