DH Casters Swivel Caster With 3" Rubber Wheel With Brake, Threaded Stem Mount 100lb Capacity - C-L30T1MSB

DH Casters Swivel Caster For Light-Duty Loads

DH Casters swivel caster with 3 inch rubber wheel with brake gives you a light-duty caster that supports up to 100 lb, so it handles office equipment, light medical stands, carts, chairs, stools, and store fixtures within that load range. The swivel type design lets the wheel rotate for maneuvering equipment in tight spaces where direction changes are frequent. A gray rubber wheel provides a non-marking wheel surface, so floors in offices, clinics, and retail spaces stay cleaner during regular movement. The wheel diameter of 3 inches combines easy rolling with a compact profile, which matters when working under cabinets or fixtures with limited clearance. A tread width of 13/16 inch creates a narrow contact patch, helping carts track predictably in tight aisles. This caster is zinc plated for corrosion resistance, so the metal components better handle typical indoor environments where moisture or cleaning can be present.

Key Caster Details That Support Daily Use

• Zinc plated construction resists corrosion, so the caster housing and stem stand up better over time in indoor environments that see cleaning or occasional moisture.
• A 3 inch wheel diameter balances low rolling resistance with compact size, so equipment moves smoothly while fitting under lower frames and stands.
• The gray rubber wheel type supplies a non-marking wheel surface, so rolling on finished floors reduces visible marks and helps maintain appearance in offices and stores.
• A tread width of 13/16 inch provides focused ground contact, so the caster tracks consistently and helps keep light carts and stands from feeling loose during movement.
• The integrated brake works with the swivel caster, so equipment can be held in place once positioned, which matters for stands, stools, or fixtures that should stay put.
• A 100 lb load capacity defines the working range, so this caster fits light-duty applications such as office equipment, light medical stands, carts, chairs, stools, and store fixtures.

Threaded Stem Mounting For Straightforward Fit

The threaded stem mounting type defines how this caster attaches, using a threaded stem mount instead of a plate, which suits frames designed with a threaded receiver or matching nut. A threaded stem size of 5/16-18 x 1 inch specifies the interface, so installers can match the stem to tapped holes or brackets cut for that thread and length. The threaded stem mount product class places this caster in the threaded stem mount category, so it pairs naturally where a stem-based solution is already in use. The swivel design with doubleball bearing swivel aids smooth rotation around the stem, which matters when aligning wheels under multi-leg equipment during installation and later repositioning. This combination lets installers focus on thread engagement and depth while the swivel assembly handles directional changes in daily service.

Using This Threaded Stem Caster In Real Projects

Where This 3 Inch Swivel Caster Performs Well

This caster belongs to the builders hardware and stem mounted casters category, so it suits equipment builds and retrofits where stem mounts are standard. Applications specifically listed are office equipment, light medical stands and carts, chairs and stools, and store fixtures, so it fits common rolling furniture and light support stands in commercial interiors. The gray rubber non-marking wheel helps protect office, clinical, and retail flooring, which matters where rolling paths cross visible customer or patient areas. A 100 lb capacity keeps it in the light-duty caster range, so it aligns with smaller stands or fixtures rather than heavy industrial carts. The brake feature gives extra control once equipment is in position, which supports tasks where movement during use would be a problem, such as on stools or narrow stands.

Details That Support Consistent Rolling And Positioning

The doubleball bearing swivel construction supports smooth turning around the stem, so equipment changes direction more easily and responds more predictably to pushes or pulls. A riveted axle secures the wheel to the caster fork, which provides a fixed pivot point for the wheel and supports consistent rolling over time. Zinc plated for corrosion resistance describes the finish on the metal parts, so the swivel and stem are better protected from rust in indoor environments that see cleaning chemicals or humidity. The gray rubber wheel with its 13/16 inch tread width helps balance grip and maneuverability, so equipment can roll and then hold position better when the brake is applied. The defined 3 inch wheel diameter and threaded stem 5/16-18 x 1 inch dimensions give installers clear reference points, which simplifies selecting matching sockets or brackets when standardizing casters across multiple pieces of equipment.

Common Questions About This DH Casters Swivel Caster

Selecting This Caster For Your Next Build

The DH Casters swivel caster with 3 inch gray rubber wheel, brake, and threaded stem 5/16-18 x 1 inch gives installers a light-duty, stem mounted solution ready for office equipment, light medical stands and carts, chairs, stools, and store fixtures. The zinc plated construction, riveted axle, and doubleball bearing swivel work together to support smooth rolling and directional changes in daily use. The non-marking gray rubber wheel and 100 lb capacity align well with typical commercial interiors and lighter loads. For projects using threaded stem mount hardware, this caster offers a clearly defined interface and application range, so it can be specified with confidence across matching equipment.