DH Casters Swivel Caster With 3" Rubber Wheel No Brake, Threaded Stem Mount 100lb Capacity - C-L30T1MS

DH Casters Swivel Caster For Mobile Stands

DH Casters swivel caster is a threaded stem-mounted swivel caster built for light-duty loads up to 100 lb, so carts, stands, and fixtures in that range move smoothly without overloading the wheel. The 3 inch wheel diameter gives a compact footprint that still rolls easily on typical hard facility floors. A 13/16 inch tread width concentrates the load enough for easy pivoting, which helps when positioning office equipment or small medical stands in tight spaces. The gray rubber wheel material is non-marking, so floors under office equipment, store fixtures, or stools stay cleaner as units are repositioned during daily use. The caster design uses a swivel type top, allowing full rotation so equipment can be steered or spun into place without lifting. This caster has no brake, which suits applications where frequent repositioning is more important than locking the wheel.

Practical Caster Details That Support Daily Use

• The 100 lb load capacity keeps this caster squarely in the light-duty range, matching typical weights of office equipment, chairs, and small carts so movement stays controlled without overbuilding the hardware.
• The gray rubber, non-marking wheel tread lets carts and stands travel across finished floors while reducing streaks during repeated moves in offices, exam rooms, or sales areas.
• The riveted axle holds the 3 inch wheel on a fixed center, so the wheel tracks consistently as the doubleball bearing swivel turns under load during frequent direction changes.
• The doubleball bearing swivel allows smooth rotation under light loads, which helps stands and fixtures pivot accurately into position around desks, counters, or exam equipment.
• The zinc-plated construction provides corrosion resistance, which supports service life when the caster is used on equipment that sees regular cleaning or exposure to indoor humidity.

Threaded Stem Swivel Mounting And Fit Details

This threaded stem swivel caster uses a 5/16-18 x 1 inch thread size, giving a defined mounting interface wherever that stem specification is used on office equipment, chairs, or light stands. The threaded stem mounting style lets the caster fasten into a threaded socket, which creates a compact, centered mounting point under tubular frames or brackets. The swivel type allows the wheel assembly to rotate around the stem, so once the stem is secured, the caster can turn freely without altering the mounting connection. The 3 inch wheel diameter paired with the tread width and gray rubber composition supports a balance of rollability and floor contact for typical light-duty indoor routes. Without a brake mechanism, the caster stays free-rolling, suiting installations where the priority is repositioning equipment quickly rather than holding it in a fixed spot.

Using This Light-Duty Caster In Real Applications

Where This 3 Inch Threaded Caster Works Best

This light-duty threaded stem swivel caster fits applications with loads up to 100 lb, such as office equipment that needs to roll out for service or cleaning. On light medical stands and carts, the 3 inch gray rubber wheel supports maneuvering around beds or instruments while remaining non-marking, which matters in clinical spaces that require clean-looking floors. Store fixtures benefit from the swivel type because displays can be rotated during layout changes, while the threaded mount supports a neat connection into frames that already use a 5/16-18 x 1 inch stem. Chairs and stools using a compatible stem socket can take advantage of the compact wheel diameter, which keeps seating height changes modest while still allowing the base to glide over hard surfaces.

Why These Swivel And Wheel Details Matter

The doubleball bearing swivel under this DH Casters swivel caster supports smooth pivoting, so operators can angle carts and fixtures with less effort during repeated small adjustments throughout a shift. A riveted axle keeps the 3 inch gray rubber wheel secure on its centerline, which helps the wheel track predictably as the swivel assembly turns, reducing wandering when pushing or pulling equipment. The 13/16 inch tread width gives a precise feel when turning because the contact patch stays narrow enough to reduce scrub in tight rotations. Zinc plating on the metal components offers corrosion resistance in normal indoor environments, which supports consistent swivel action when equipment is wiped down or exposed to humidity. The non-marking wheel construction directly supports use on finished flooring, so repeated rolling under chairs, stools, or store fixtures can occur without leaving dark tracks during typical repositioning.

Common Questions About The C-L30T1MS Caster

Choose This Swivel Caster For Light-Duty Mobility

The DH Casters swivel caster with 3 inch gray rubber wheel, threaded 5/16-18 x 1 inch stem, and 100 lb capacity ties directly to light-duty carts, fixtures, and seating that benefit from non-marking, swivel-mounted mobility. When those applications align with its specified load range and mounting thread, selecting this caster lets equipment roll, pivot, and relocate efficiently while maintaining a compact overall height and corrosion-resistant construction suitable for typical indoor environments.