Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters swivel caster 2 inch non-marking rubber is a threaded stem mounted wheel with a 66lb capacity that supports light-duty carts or fixtures where marking the floor is not acceptable. The non-marking rubber gray wheel rolls without leaving dark tracks, which helps keep finished floors or work areas looking clean after repeated passes. The swivel design allows the caster to rotate as direction changes, so small carts or stands can be maneuvered into tight spaces without dragging. As a threaded stem mount caster, it installs into a compatible threaded socket or nut, creating a compact connection above the wheel that suits cabinets, fixtures, and light equipment legs. The 66lb capacity rating defines how much load one caster is designed to carry, which matters when planning total support across multiple contact points on a project.
This threaded stem mount caster belongs to the threaded stem mount product class, so it secures by threading the stem into a matching female thread instead of using a top plate. The stem option of 3/8 inch diameter by 16 gauge by 1-1/4 inch length suits applications needing a longer, slightly larger threaded engagement, which can help when mounting into deeper wood or metal receivers. The alternate stem of 5/16 inch diameter by 18 gauge by 1 inch length works where a slimmer, shorter stem is appropriate, which can be useful in lighter frames or shallower threaded inserts. Using the stated stem diameter and length values helps match the caster to an existing threaded hole so the connection seats fully and the yoke rests properly against the mounting surface.
This caster is part of the stem mounted casters category, so it is suited to applications where a threaded stem connection is already planned or present. The 2 inch non-marking rubber gray wheel works well for light carts, cabinets, or fixtures that move across finished floors, because it provides rolling support while minimizing visible floor marks. The available stem sizes of 3/8 inch diameter by 16 gauge by 1-1/4 inch length and 5/16 inch diameter by 18 gauge by 1 inch length give options for different threaded hole sizes, so the caster can match either a larger, deeper mounting point or a smaller, shallower one on a project. The embossed zinc plated yoke supports the wheel and swivel action, which matters where the caster is visible under furniture or shop fixtures and needs a neat metal appearance to match other hardware.
The threaded stem mount design lets the caster center itself as it is threaded into place, which can help keep the wheel aligned so carts track straight when multiple casters are installed. The defined stem diameters of 3/8 inch and 5/16 inch indicate the specific thread size range this caster is built around, which allows the installer to match the correct receiver so the yoke seats firmly against the mounting surface. The stem lengths of 1-1/4 inch and 1 inch provide enough engagement for common cabinet and light equipment legs, which supports a solid connection without excess projection beyond the mating material. The 66lb capacity figure guides how many casters are appropriate under a given load, which helps avoid overloading individual swivel points so the caster continues to roll and pivot smoothly. The non-marking rubber gray wheel composition provides grip while reducing the chance of leaving dark streaks, which is useful in retail, office, or residential spaces that rely on clean flooring around movable fixtures.
This DH Casters swivel caster is rated at 66lb capacity, which defines how much weight one caster is designed to support on a light-duty cart or fixture.
The non-marking rubber gray wheel rolls without typical black rubber streaks, which helps maintain cleaner-looking light or finished floors during regular movement.
This caster uses a threaded stem mount, so it fastens by threading the stem into a compatible female thread on furniture, carts, or frames.
This DH Casters model is available with a 3/8 inch diameter by 16 gauge by 1-1/4 inch stem or a 5/16 inch diameter by 18 gauge by 1 inch stem for different threaded holes.
The embossed zinc plated yoke supports the wheel and swivel action while providing a clean metal finish that suits exposed hardware on cabinets or fixtures.
This product line offers casters with or without brakes, allowing selection based on whether the application needs rolling only or rolling plus wheel locking.
The DH Casters swivel caster 2 inch combines a threaded stem mount, non-marking rubber gray wheel, and 66lb capacity, which suits light-duty cabinets, fixtures, and carts using threaded receivers. The embossed zinc plated yoke and defined stem options support consistent mounting and appearance across multiple units on the same build. For projects needing a compact, maneuverable stem mounted caster in this capacity range, this C-L20T1MS model from Wurth Baer Supply offers a focused fit for threaded stem applications.
Sold In: 1 Each
