DH Casters swivel caster with 2 inch rubber wheel and threaded stem mount gives carts and fixtures a compact, pivoting wheel that turns easily under load, so cabinets, jigs, and shop equipment can be positioned without dragging or lifting.
The caster is identified as DH Casters Swivel Caster With 2 inch Rubber Wheel No Brake, Threaded Stem Mount 77lb Capacity - C-L20T1RS, which defines it as a no-brake, swivel-only wheel designed to carry up to 77 pounds, keeping light-duty shop and builder projects mobile while staying within a clearly defined load rating.
The SAP description notes 2 inch threaded stem, swivel, rubber, 100lbs, tying the 2 inch wheel and rubber material directly to weight handling and rolling feel, so small carts and stands move more predictably on typical hard shop floors.
The caster sits in the Stem Mounted Casters category with a Product Class of Threaded Stem Mount, so it relies on a threaded stem interface rather than a top plate, which suits tube frames, wood blocks, or fixtures drilled to accept a threaded post connection.
The Web Description states that it is available in rubber (black) and non-marking rubber (gray), so installations can be matched either to darker shop fixtures or to applications where reducing visible floor marks from rolling is a priority.
The same Web Description also states it is sold in both broken and full box quantities, which supports small one-off cabinet or jig projects as well as higher volume fixture builds using the same caster specification.
The Product Class is Threaded Stem Mount, and the Web Description lists two stem sizes of 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length, so the caster is designed to mount by engaging either of these stem dimensions into a matching threaded or gripped hole.
That threaded stem approach means the load transfers through a central post instead of a plate, which can help when installing casters into the ends of legs on shop fixtures or cabinet bases drilled or tapped to those diameters and lengths.
The SAP description identifies the caster as swivel and rubber, meaning the wheel rotates around a vertical axis and rolls on a rubber tread, so a cart or stand can pivot in tight spaces while still relying on the rubber contact edge for traction on typical hard surfaces.
The Product Name specifically notes no brake, so the caster is intended to roll and swivel freely without a stop mechanism, which suits utility carts and movable fixtures where frequent repositioning matters more than holding in a locked position.
The Category entry Builders Hardware|Stem Mounted Casters and the Product Class of Threaded Stem Mount place this caster squarely in the stem mounted casters group, making it suited to shop-built carts, rolling cabinets, and fixtures arranged around woodworking tools.
The Web Description and SAP Description combine to show a 2 inch rubber swivel caster with threaded stem in either 3/8 inch or 5/16 inch diameter stem sizes, which lines up well with legs or frames designed with drilled or threaded holes sized to those stem dimensions for a controlled fit.
The 2 inch rubber wheel from the Product Name and SAP Description provides a small rolling radius, so stands under benchtop tools or compact cabinets stay close to the floor, which can help keep work surfaces at familiar heights while still allowing movement.
The rubber and non-marking rubber (gray) options called out in the Web Description match different floor expectations: rubber (black) suits general shop and utility work, while non-marking rubber (gray) suits situations where visible marks on lighter or finished floors are less acceptable.
The embossed zinc plated yoke in the Web Description defines the swivel housing as zinc plated metal, so the turning joint that links stem to wheel benefits from this finish in typical woodworking environments where humidity and dust are present.
The 77lb capacity noted in the Product Name and the 100lbs value in the SAP Description both associate the caster with light-duty loads, so when multiple casters are used under a cart, the overall load range stays in a clear, lighter-weight project bracket.
The Web Description lists the two specific stem sizes as 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length, giving defined diameter and length figures that guide how deep and wide a receiving hole or threaded insert needs to be for the stem.
Those stem length values tie directly to how much engagement the caster can have inside a leg or frame member, so fixture builders can plan material thickness and reinforcement around the stated 1-1/4 inch and 1 inch stem lengths.
The combination of 3/8 inch and 5/16 inch diameters provides two mounting size patterns within the same caster group, which helps standardize on one caster family across different fixtures that may be drilled for either of these common stem diameters.
The swivel designation from the SAP Description indicates the yoke turns around the stem, so once the stem is secured, the wheel can rotate 360 degrees under the load, which helps carts and stands change direction without needing large turning aisles.
The Product Name describes the caster as no brake, which means there is no brake mechanism to adjust or account for when planning handle positions or edge clearances, simplifying layouts where casters sit close to cabinet sides or frame corners.
The Web Description states the caster is sold in both broken and full box quantities, which allows project planners to specify exact caster counts for prototypes, one-off shop fixtures, or larger production runs while keeping the caster specification consistent.
The C-L20T1RS caster uses a 2 inch rubber wheel, keeping fixtures low while still giving enough diameter for smooth rolling around woodworking tools and shop benches.
The threaded stem mount uses either a 3/8 inch or 5/16 inch diameter stem that seats into a matching hole or insert, so the load transfers through a central post connection.
This DH Casters swivel caster is identified with a 77lb capacity in the Product Name, guiding how much weight each caster is intended to carry under light-duty carts or fixtures.
The Product Name lists the caster as No Brake, so it is designed to swivel and roll freely without a braking mechanism for applications that prioritize frequent repositioning.
The Web Description lists two stem sizes: 3/8 inch diameter x 16 gauge x 1-1/4 inch length and 5/16 inch diameter x 18 gauge x 1 inch length for different mounting patterns.
The Web Description specifies rubber (black) and non-marking rubber (gray) options, so the rolling surface can be matched to general shop floors or lighter, mark-sensitive floors.
The DH Casters swivel caster with 2 inch rubber wheel, threaded stem mount, and no brake design brings a compact, light-duty wheel into builders hardware projects where a stem mounted caster is preferred over a plate.
With defined 3/8 inch and 5/16 inch stem sizes, a stated 77lb capacity, and rubber or non-marking rubber options, it aligns well with carts, cabinets, and fixtures built around threaded stem casters.
For woodworking and shop projects that call for a 2 inch rubber swivel caster in the C-L20T1RS configuration, this stem mounted caster provides a consistent specification to design around.
Sold In: 1 Each
