#8 x 2-1/2 washer head screw describes a sharp point, round washerhead screw sized for common woodworking assembly, so it matches typical cabinet and furniture build dimensions while spreading load at the head. The round washerhead is typically used in soft woods to prevent the head from sinking into the wood, which helps maintain clamping pressure without crushing the surface. This screw is case hardened and lubricated, so it resists wear at the drive interface and drives more easily into material during production runs. The patented serrated tooth turbo thread allows for quick starting, reduced splitting, and less drive torque, giving smoother insertion into soft woods and engineered panels. Uses #2 square drive bits to insert, so installers can drive with positive engagement, while #2 Phillips drive bits can be used for after market adjustment when fine tuning hardware.
Uses #2 square drive bits to insert, so drivers seat firmly in the recess and transfer torque efficiently in cabinet, casework, or furniture builds. #2 Phillips drive bits can be used for after market adjustment, which allows later repositioning of face frames, hinges, slides, or other hardware without changing screw style. The sharp point works with the patented serrated tooth turbo thread to start quickly in wood, which is useful when running long screws into soft woods or typical woodworking substrates. 3/4" and 1" lengths are threaded fully, while all other sizes are threaded two-thirds from the bottom of the screw, so the 2-1/2" length uses a partial thread that can draw parts together as the unthreaded shank passes through the first component.
This Wurth washer head assembly screw is used in all woodworking applications: assembly, face frame, slides, hinges and hardware, so it suits cabinet carcass work and detailed hardware mounting with the same drive style. The round washerhead is typically used in soft woods to prevent the head from sinking into the wood, which keeps hinge leaves, slide brackets, and brackets seated flat against the surface. In face frame assembly, the washerhead profile spreads bearing area at the joint, which helps hold frame members tight while the turbo thread locks into the substrate. For slides and hinges, the sharp point and patented serrated tooth turbo thread allow for quick starting, so installers can set screws accurately without walking across the hardware slot. Used across assembly, face frame, slides, hinges and hardware, this one fastener type supports a consistent approach on benches and in field installation.
The patented serrated tooth turbo thread reduces splitting and lessens required drive torque, which matters when fastening near board edges or into narrow face frame stock. Reduced splitting helps maintain the integrity of soft woods and typical cabinet materials, especially at pre-drilled or close-to-edge locations. Less drive torque allows tools to run at moderate settings, which supports consistent depth without overdriving the washerhead into the material. Case hardened, lubricated construction lets the screw cut into wood efficiently while helping the drive recess resist rounding during high-volume work. Uses #2 square drive bits to insert, so bit engagement is positive and slippage is reduced during overhead or awkward driving angles. #2 Phillips drive bits can be used for after market adjustment, which supports later alignment of face frames, slides, hinges and hardware while staying with the same screw pattern.
The round washerhead is typically used in soft woods to prevent the head from sinking into the wood, which helps protect softer substrates and keeps mounted hardware seated flat.
The patented serrated tooth turbo thread allows for quick starting, reduced splitting, and less drive torque, which speeds installation and supports cleaner results near edges in woodworking applications.
The screw uses #2 square drive bits to insert, providing solid torque transfer, and #2 Phillips drive bits can be used for after market adjustment when repositioning hardware.
The screw is used in all woodworking applications: assembly, face frame, slides, hinges and hardware, so it covers many cabinet and furniture fastening tasks.
All sizes except 3/4 inch and 1 inch are threaded two-thirds from the bottom of the screw, so the 2-1/2 inch length has a partial thread for drawing parts together.
The screw is case hardened and lubricated, which helps the threads cut into wood smoothly and supports long-lasting drive recess performance during repeated use.
This Wurth washer head assembly screw combines a #8 x 2-1/2 washer head format, sharp point, and patented serrated tooth turbo thread, so it fits typical woodworking assembly, face frame, slides, hinges and hardware tasks with one specification. The round washerhead is typically used in soft woods to prevent the head from sinking into the wood, which supports consistent clamping of hardware and joints. Uses #2 square drive bits to insert and accepts #2 Phillips drive bits for after market adjustment, so installers and shops can match existing driver setups while maintaining a single screw style across many stations.
Sold In: 2000 Each
