Würth #8 x 2" Washer Head Assembly Screw Combo Drive - Sharp Point Turbo Thread Lubricated, 3670000232961 250 - 250/Box

A 2-Inch Assembly Screw Built for Deeper Cabinet Joints

The Würth #8 x 2" washer head assembly screw is a lubricated, turbo-thread fastener designed for wood panel assembly, cabinet box construction, and casework joints where 2-inch penetration gives the joint solid holding power. The washer head spreads clamping load across the material surface, and the combination drive accepts either a #2 Phillips or a #2 square bit so the screw fits the driver you already have on the bench.

Key Features

• Turbo thread reduces driving torque and moves through panel materials efficiently during production assembly.
• Washer head distributes clamping force over a broad bearing surface, making it well suited for through-panel connections and soft substrates.
• Combination drive accepts a #2 Phillips or a #2 square bit in the same recess, keeping the screw compatible with common bit sets.
• Sharp point self-starts in softwood, plywood, and engineered panels without a pilot hole.
• Lubricated finish lowers installation friction for faster, cleaner driving in high-volume shop environments.
• 250 per jar gives cabinet shops and installers a practical quantity for ongoing assembly work without overstocking.

Where 2-Inch Penetration Makes the Difference

At 2 inches, this screw reaches into joined panels with enough thread engagement to hold cabinetry joints under real service loads. That extra reach compared to shorter assembly screws makes this length the right call when you are fastening cabinet backs into thicker carcass walls, securing blocking inside a box, or pulling together a stacked assembly where both panels have some thickness. The washer head keeps the joint tight at the surface without pulling through, and the turbo thread keeps driving torque manageable even when the screw is working deeper into the material.

Lubrication and the Combo Drive in a Production Context

The lubricated finish is a practical detail for shops running volume. It reduces the friction load on each drive cycle, which means less torque on the tool, less risk of stripping the recess, and a bit that lasts longer through a production run. The combination drive recess is designed for both Phillips and square bits. Square drive provides better torque transfer and is designed to hold the screw on a correctly sized bit for one-handed placement. Phillips compatibility means any technician in the shop can pick up the screw and drive it with what is already in the tool. The two capabilities in one recess reduce bit changes on mixed crews.

The Right Fit for Cabinet Shops and Finish Installers

This screw works wherever a #8 assembly fastener is needed and a 2-inch length is appropriate for the joint. For cabinet shops, that covers box assembly, back panel attachment, and interior blocking. For finish installers, it works for securing cabinet components to each other or to backing material during installation. The sharp point self-starts in plywood, melamine-faced particleboard, and softwood without pre-drilling, which keeps the workflow moving when you are driving dozens or hundreds of screws in a session. The 250-count jar format is a practical size for both bench assembly and job-site installs.

Common Questions

Keep Assembly Moving with the Right 2-Inch Fastener

When the joint calls for 2 inches of penetration and a surface-bearing head, this Würth washer head assembly screw delivers the thread engagement, drive flexibility, and lubricated finish that keep cabinet production and finish installation on pace.