Knape and Vogt Chrome 1-1/16"D x 10'L Round Closet Rod, Steel - 750 1 120
Description
Knape And Vogt Chrome Closet Rod For Storage Runs
Knape and Vogt chrome closet rod gives you a 1-1/16 inch outside diameter steel tube that carries hanging loads on a round profile that works well with typical closet layouts. The 10 foot length lets you span longer walls in one continuous run, which cuts down on splices and keeps hanging garments aligned. The steel construction provides a rigid hanging surface, so the rod supports everyday closet use in residential or light commercial projects. The chrome finish on the rod creates a smooth metal surface that helps hangers slide along the run, which makes it easier to shift clothing during layout or seasonal changeovers. The Knape and Vogt brand and 750 1 120 part number tie directly to a known closet tubing line, so you can match rods across multiple openings in the same project.
Key Closet Rod Details For Real Projects
- The round closet rod uses a 1-1/16 inch outside diameter, so it presents a substantial hanging surface that works with hangers sized for common tubular closet systems.
- The steel material gives this closet tubing a solid feel under hanging loads, which helps maintain straight lines on longer runs in wardrobe or storage spaces.
- The rod length is specified at 10 feet, allowing long, continuous spans in reach-in or wall-to-wall closets where a single piece simplifies layout and cutting.
- The wall thickness is listed as 0.075 inch, so the tube has a defined gauge that supports typical hanging weight without adding unnecessary bulk.
- The inside diameter of 29/32 inch describes the hollow core size, which matters when you plan cuts or mating with compatible open-end supports from the same system family.
- The chrome finish is specified on the rod, giving a bright metal appearance that aligns with many closet hardware finishes and presents a smooth contact surface for hangers.
Installation Fit Guided By Rod Dimensions
This 10 foot round closet rod is identified as having a 1-1/16 inch outside diameter, which sets the reference for selecting flanges or supports from matching closet hardware series. The 0.075 inch wall thickness defines the tube profile during cutting or drilling, which helps maintain a clean edge when trimming to an exact opening width. With an inside diameter of 29/32 inch, the hollow section stays consistent from end to end, which matters when you expect straight alignment across multiple supports. The 10 foot overall length gives you extra material beyond many standard openings, so you can cut several shorter sections from one piece where project dimensions allow.
Closet Rod Use In Storage Layouts
Where This Steel Closet Rod Fits Best
This steel round closet tubing fits into shelf, closet, and garage organization layouts where a 10 foot span and 1-1/16 inch diameter rod are appropriate for hanging items. The Knape and Vogt closet rod format aligns with the Closet Rods and Flanges product class, so it plays the central role in a hanging system supported by separate hardware pieces from the same category. The chrome finish works visually with many common shelf standards and brackets, which helps build coordinated storage runs in wardrobes, utility rooms, or similar spaces. Because the tube length extends to 10 feet, one rod can serve wider wall sections in a single piece, which is useful when you want a consistent hanging line across a longer reach.
Why These Rod Dimensions Support Consistent Results
The specified 1-1/16 inch outside diameter provides a repeatable size for planning cut lengths and support spacing, so you can standardize openings across a project that uses multiple closet sections. The 0.075 inch wall thickness gives the rod a predictable tube gauge, which matters when you trim ends or deburr cuts to keep hanger travel smooth. With a 29/32 inch inside diameter, the steel tube maintains a uniform hollow profile, helping retain alignment when rods from the same 750 1 120 series are cut and installed side by side. The 10 foot overall length supplies enough stock to handle full-width reach-in applications, and also allows offcuts to be used on shorter sections, supporting efficient material use on multi-closet jobs.
Common Questions About Knape And Vogt Closet Rod
What is the outside diameter of this closet rod?
The closet rod has a 1-1/16 inch outside diameter, which sets the sizing for hangers and matching supports when you design hanging sections in closet layouts.
How long is the Knape and Vogt chrome closet rod?
The Knape and Vogt chrome closet rod is specified at 10 feet in length, so it can span longer walls or be cut into multiple shorter sections for several openings.
What material is used for this round closet tubing?
The round closet tubing is made of steel, providing a solid tube structure that supports typical hanging loads in closet and storage applications.
What is the wall thickness on this steel closet rod?
The steel closet rod has a wall thickness of 0.075 inch, giving a defined tube gauge that balances strength with manageable weight for handling and cutting.
What is the inside diameter of the closet rod?
The closet rod has an inside diameter of 29/32 inch, which defines the hollow core size when planning cuts or working with components sized to the interior.
What finish does this Knape and Vogt closet rod have?
This Knape and Vogt closet rod has a chrome finish, giving a bright metal look and a smooth surface that works well with standard closet hangers.
Selecting This Closet Rod For Your Run
The Knape and Vogt chrome closet rod, identified by part number 750 1 120, gives you a 10 foot steel tube with a 1-1/16 inch outside diameter for building hanging sections in closet and storage projects. The defined wall thickness of 0.075 inch and 29/32 inch inside diameter provide consistent tube geometry, which supports accurate cutting and layout across multiple openings. Use these verified dimensions and the chrome finish profile to match this rod to your planned closet hardware and overall storage design.
