KV 1-5/16" x 72" Round Closet Rod, Chrome, 750 5 72

Knape And Vogt Chrome Closet Rod For Hanging

Knape and Vogt chrome closet rod gives installers a 6 foot steel hanging solution with a 1-5/16 inch outer diameter, so standard closet layouts can be spanned with a single, continuous length for a clean, uniform run. The rod is made of steel, providing a rigid bar that supports typical hanging loads in residential and light commercial closets without relying on composite tubing. The chrome finish on the surface creates a smooth contact point for hangers, which helps garments slide along the rod instead of catching on rough material during daily use. With its round tubing form, this closet rod works naturally with flanges and supports designed around 1-5/16 inch outer diameter tubing, streamlining hardware selection on straightforward hanging projects.

Key Chrome Closet Rod Details For Projects

• The 6 foot length gives closet installers a single span for many reach-in openings, reducing on-site cutting when wall-to-wall dimensions match or are close to this standard size.
• The 1-5/16 inch outer diameter matches common closet tubing hardware dimensions, which helps rods sit securely in appropriately sized flanges and supports for consistent alignment.
• The steel construction provides a solid, tubular bar that resists bending under typical wardrobe loads, supporting everyday use in bedroom, hall, or storage closets.
• The chrome finish creates a bright, smooth surface that allows hangers to move along the rod with less friction, helping users adjust clothing positions easily.
• The inside diameter of 1-5/32 inch and wall thickness of 0.087 inch define the tubing profile, which gives a balance of strength and manageable weight for handling and cutting.

Closet Rod Fit, Sizing, And Installation Use

This 1-5/16 inch outer diameter closet rod works within closet designs that specify that tubing size, supporting straightforward alignment with compatible flanges and center supports sized for that dimension. The 6 foot length lets installers bridge typical closet spans without joints, which simplifies leveling because there is only one piece to position between end supports. With a wall thickness of 0.087 inch and an inside diameter of 1-5/32 inch, the tubing offers a robust yet workable profile, allowing field cuts when shorter sections are needed while still maintaining a strong cross-section for hanging loads. The chrome finish also presents a smooth, hard surface that is ready to be mounted into matching closet hardware for day-to-day wardrobe use.

Using This Knape And Vogt Rod In Closets

Where This Steel Closet Tubing Performs Well

This Knape and Vogt 750 5 72 steel closet rod fits closet layouts that call for a 6 foot run and a 1-5/16 inch outer diameter, covering many standard reach-in openings in bedrooms and storage areas. The chrome finish suits open or enclosed closets where a clean, reflective rod is visible, giving a finished look that pairs with typical chrome closet hardware. Because the tubing is made of steel with a 0.087 inch wall, it supports everyday hanging of shirts, jackets, and similar garments, which is important in bedrooms or hall closets that see regular use. The round profile also works in basic organizer systems that rely on round tubing, making it a straightforward component wherever a simple hanging bar is required.

Details That Support Straightforward Rod Results

The 1-5/16 inch outer diameter of this chrome finish closet tubing provides a precise interface with end flanges and supports built for that size, helping keep the rod seated properly so hangers track smoothly along the bar. The 6 foot length simplifies layout work because installers can reference a known span when planning support positions, reducing measuring complexity on standard closet widths. The inside diameter of 1-5/32 inch and wall thickness of 0.087 inch define the steel tube geometry, which affects how the rod responds when loaded and how it feels during cutting or drilling adjustments. With its steel construction and chrome surface working together, the closet rod provides a rigid, low-friction hanging line that supports consistent day-to-day garment access.

Common Knape And Vogt Closet Rod Questions

Select This Chrome Rod For Sized Closet Runs

The Knape and Vogt chrome closet rod with 1-5/16 inch outer diameter and 6 foot length provides a defined, steel hanging bar for closet organization projects. Use this round tubing where chrome finish, standard closet sizing, and steel construction all support the planned hanging run.