Knape and Vogt Chrome 1-1/16"D x 12'L Round Closet Rod, Steel - 750 1 144
Description
Knape And Vogt Chrome Closet Rod For Long Runs
Knape and Vogt chrome closet rod gives you a 12 foot steel run for continuous hanging space, so longer walls or multi-opening closets can be spanned with a single piece instead of stitching short sections together. The 1-1/16 inch outer diameter creates a substantial rod profile that works with round closet tubing components in many shop layouts that use this diameter standard. A chrome finish on the tubing provides a bright, finished look, which helps closet and storage installs present as complete and consistent with other chrome components. The wall thickness of 0.075 inch means the steel tube has a defined cross section, so cuts and drilled locations can be planned with that thickness in mind during fabrication. An inside diameter of 29/32 inch gives you a clear reference when matching this closet tubing with interior-fit plugs, supports, or other components that are built around the inner bore.
Key Closet Tubing Details For Project Planning
- The 12 foot length lets installers span wide closets or storage areas with one continuous steel tube, reducing joint points that otherwise need extra alignment work during layout.
- The 1-1/16 inch outer diameter sets a clear sizing reference, so mating closet flanges and other round tubing hardware designed around this diameter can be selected and laid out accurately.
- The 0.075 inch wall thickness defines how much material is available at cuts or drilled locations, which helps during layout of set screws, hangers, or notches that must stay within the tube wall.
- The 29/32 inch inside diameter provides a precise inner bore size, which matters when using internal supports or inserts designed to fit inside steel tubing at a known clearance.
- The chrome finish on the round closet rod creates a clean appearance that aligns with other chrome storage components, supporting visually consistent closet and organization builds.
Closet Rod Dimensions That Guide Installation Layout
The 12 foot overall length gives a fixed span to work from when positioning closet supports along walls or inside cabinetry, so mounting locations can be laid out with clear start and end points. With a 1-1/16 inch outer diameter, this steel closet rod defines how far it projects from the mounting centerline, which affects clearance to doors, shelves, and adjacent hanging zones. The 0.075 inch wall thickness means there is enough defined material for work such as drilling through the steel rod, helping installers plan any through-holes or set points around that specific thickness. A 29/32 inch inside diameter provides a predictable cavity for internal-fit parts, supporting layouts where inserts or interior sleeves need to sit within the tubing at a known clearance.
Using This Steel Closet Rod In Real Projects
Where This Chrome Closet Rod Fits Best
This Knape and Vogt chrome 1-1/16 inch diameter closet rod is positioned for shelf, closet, and garage organization layouts that use steel round tubing as the hanging member. The 12 foot length helps in long reach-in closets or continuous wall storage runs where a single piece reduces time spent aligning multiple shorter sections. Because the tubing sits in the Closet Rods and Flanges product class, it matches projects that build around round closet tubing and coordinating flanges for mounting. The chrome finish supports closet interiors or open storage where exposed hardware needs a finished look that coordinates with other chrome components in a space. For woodshops and installers building custom closet systems, the known 1-1/16 inch outer diameter works with layouts based on that standard size across rods and related fittings.
Details That Support Repeatable Closet Rod Results
The steel construction combined with a 0.075 inch wall thickness defines a repeatable tube profile, so each cut segment from the 12 foot piece shares the same cross section for consistent fit in flanges and brackets. The 29/32 inch inside diameter provides a reliable constant for internal-fit components, meaning inserts or interior supports that match this bore will seat similarly along the entire length. The 12 foot span lets installers cut multiple shorter rods from a single length while retaining the same 1-1/16 inch diameter and wall, which streamlines repeat closet sections in multi-unit or multi-room projects. Being a Knape and Vogt part identified as 750 1 144 gives fabricators and shop teams a specific reference when reordering or matching rods to existing installations that already use this exact tubing. Locating this product under Shelf, Closet and Garage Organization helps project planners align this closet rod within broader storage systems built from related components.
Common Questions About Knape And Vogt Closet Rods
What are the main dimensions of this Knape and Vogt chrome closet rod?
This Knape and Vogt chrome closet rod has a 12 foot length, a 1-1/16 inch outer diameter, a 0.075 inch wall thickness, and a 29/32 inch inside diameter, giving installers clear measurements for planning cuts and supports.
How does the 1-1/16 inch outer diameter affect closet hardware choice?
The 1-1/16 inch outer diameter sets the rod size, so flanges and other round closet tubing components designed around this diameter can be selected to match and support the rod consistently.
Why is the 0.075 inch wall thickness important for installation work?
The 0.075 inch wall thickness tells installers how much steel is present at drill points or cut ends, which helps when planning holes or fastener locations within the tube wall.
What does the 29/32 inch inside diameter mean in practice?
The 29/32 inch inside diameter defines the inner bore, so internal supports, plugs, or inserts sized for that opening can be used with consistent fit along the steel tubing.
How does the 12 foot length help with closet and garage organization runs?
The 12 foot length allows long spans in closets or garage storage, reducing joints between sections and simplifying layout for continuous hanging or support runs along walls.
What is the role of the chrome finish on this steel closet rod?
The chrome finish provides a bright, finished surface that visually matches other chrome storage components, supporting uniform appearance in closet or organization installations.
Choose This Rod For Defined Closet Tubing Dimensions
The Knape and Vogt chrome 1-1/16 inch diameter, 12 foot steel closet rod gives installers fixed dimensions that simplify closet and storage planning. With clearly defined outer and inner diameters plus a 0.075 inch wall, each cut piece behaves predictably in flanges or supports. Using this closet tubing within Shelf, Closet and Garage Organization layouts aligns hanging runs with a known standard size. For projects that need dependable rod geometry across multiple openings or rooms, this steel tubing keeps measurements consistent from one install to the next.
