Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Studio Series stainless steel knob gives cabinets a squared, modern pull point using a 1-1/4 inch square face that matches common door and drawer scales. The zinc die cast construction provides a solid hand feel during everyday use in kitchen, bath, or shop cabinetry. A stainless steel finish ties into stainless appliances and hinges, helping maintain a consistent hardware look across the project. The 1-1/4 inch projection sets a comfortable clearance off the face of the door or drawer front, giving fingers room to grab without hitting the panel. A 1 inch base steps down cleanly from the square face, which helps visually center the knob on narrow rails and stiles. The 1-1/4 inch by 1-1/4 inch layout simplifies layout spacing when repeating this knob across multiple fronts.
The specified 8-32 x 1 inch screw size identifies the thread and length used with this knob, which aligns with standard cabinet door and drawer front boring practices. Using an 8-32 thread allows the knob to mate with widely used cabinet screw tooling, which supports straightforward installation in shop-built or factory-built cabinets. The 1 inch screw length pairs well with typical door and drawer front thicknesses, offering enough thread engagement through the zinc die cast body without excess fastener protruding inside the cabinet. The 1-1/4 inch square face gives a clear visual reference for aligning the knob straight to door edges during mounting. Together, these dimensions help maintain consistent knob height and orientation across a full run of fronts.
The 1-1/4 inch by 1-1/4 inch square size positions this Studio Series knob for use on standard cabinet doors and drawer fronts, because it neither overwhelms narrow frames nor disappears on wider rails. The stainless steel finish supports projects where other stainless components are present, such as hinges or appliance handles, helping tie the hardware package together visually. The zinc die cast construction suits interior cabinet environments, where metal knobs handle frequent contact on doors and drawers in kitchens, baths, and shop furniture. The 1 inch base fits comfortably on most face-frame and frameless fronts, giving installers a defined footprint to center on rails, stiles, or drawer faces. The Belwith Keeler brand and Hickory Hardware Studio Series naming connect this knob to a recognized decorative hardware family for coordinated layouts.
The square 1-1/4 inch face provides clear visual cues for rotation, so installers can align the knob edges parallel to cabinet doors and drawer fronts for a uniform grid. Matching 1-1/4 inch length, width, and projection creates a compact cube-like profile, which helps maintain consistent sightlines when lining multiple knobs across uppers and base cabinets. The specified 8-32 x 1 inch screw size allows the knob to interface with typical cabinet boring jigs designed around 8-32 hardware, supporting repeatable positioning from one front to the next. A 1 inch base centered under the square face helps distribute contact against the door or drawer surface, which supports a stable feel each time the knob is pulled. The stainless steel finish offers a smooth surface that handles repeated gripping while presenting a uniform appearance across all installed knobs.
The Hickory Hardware Studio Series stainless steel knob measures 1-1/4 inch square in length and width, has a 1-1/4 inch projection, and uses a 1 inch base, helping it scale well on standard cabinet doors and drawers.
The P3015-SS knob uses zinc die cast material with a stainless steel finish, giving a solid metal body with a stainless appearance that coordinates with common cabinet hardware.
The 1-1/4 inch projection sets the knob off the cabinet surface enough for fingers to grip cleanly, which supports comfortable opening of doors and drawers without crowding the panel face.
The Belwith Keeler Hickory Hardware Studio Series knob specifies an 8-32 x 1 inch screw size, matching standard cabinet knob threads for typical door and drawer front thicknesses.
The 1 inch base creates a defined footprint beneath the 1-1/4 inch square face, helping center the knob on common stile and rail widths for a balanced appearance.
The Studio Series name ties this knob to the Hickory Hardware Studio Series collection, supporting coordinated decorative hardware choices across a cabinet project.
The Hickory Hardware Studio Series stainless steel knob combines a 1-1/4 inch square profile, 1-1/4 inch projection, and 1 inch base with an 8-32 x 1 inch screw interface, giving installers a clearly defined hardware choice for standard cabinet doors and drawers. The zinc die cast body and stainless steel finish align with typical decorative hardware expectations in kitchens, baths, and shop cabinetry. For projects calling for a square stainless look with consistent dimensions across multiple fronts, this P3015-SS knob from Belwith Keeler provides a straightforward specification to match cabinet layouts.
Sold In: 1 Each
