Knape and Vogt 3-1/2" Draw Bolt -516-1

Knape And Vogt Draw Bolt For Tight Joints

Knape and Vogt draw bolt gives installers a dedicated fastener for pulling Tite Joints together in woodworking and similar work. The bolt is designed for use with 3/4 inch thick substrate, so it targets a common material thickness in cabinet and panel construction. That thickness match helps the bolt engage properly in the joint area, which supports consistent clamping force during assembly. The 3-1/2 inch draw bolt length allows the fastener to work across typical joint widths used with Tite Joints, so panels or components can be pulled together over a practical span. With a center to center range from 2 inches to 3-1/2 inches, the bolt covers different layout dimensions without changing to a different fastener type. That adjustable spacing simplifies planning repeated joints, because the same bolt specification serves several common center distances.

Key Draw Bolt Details For Real-World Use

• The designation 516-1 draw bolt ties directly to the manufacturer part number 516-1, so installers can reorder the exact same fastener when matching existing Tite Joints on future projects.
• Being part of the Tite Joints and Dog Bones product class means this draw bolt is intended to work in that style of joint, which helps keep fastener choices consistent within a project layout.
• Placement in the Fasteners and Tite Joint Fasteners category defines its role as a structural joining fastener, which guides where it fits in the assembly plan compared to decorative or non-clamping hardware.
• Design for 3/4 inch thick substrate focuses the bolt on that material thickness, reducing guesswork when selecting a joint fastener for panels or components built around 3/4 inch stock.
• The stated center to center span from 2 inches to 3-1/2 inches provides a usable range for joint layout, so one bolt specification can cover multiple spacing conditions within typical assemblies.

Installation Layout And Center-To-Center Planning

This 3-1/2 inch draw bolt is designed for 3/4 inch thick substrate, so hole and joint layout can be based around that common material thickness. The 2 inch to 3-1/2 inch center to center specification defines how far apart joint components or boring locations can be while still allowing the bolt to pull parts together. That range helps installers align multiple joints along a run while keeping a single bolt style in the workflow. As a Tite Joint fastener, the bolt is planned as part of a joint system rather than a general-purpose connector, so its dimensions are oriented toward that specific joint geometry.

Using This 516-1 Draw Bolt In Joint Work

Where This Tite Joint Fastener Fits Best

This Knape and Vogt 3-1/2 inch draw bolt fits into projects where 3/4 inch thick substrate is standard, such as many cabinet or panel-based assemblies that rely on Tite Joints. Being in the Tite Joints and Dog Bones product class connects it to joints that rely on internal fasteners to pull mating parts together from the inside. The 2 inch to 3-1/2 inch center to center capability gives flexibility across several joint spacings on a run of panels, so the same fastener can serve different locations without changing part numbers. That consistency can streamline layout templates, boring patterns, and job planning when similar joints repeat.

Details That Support Repeatable Tite Joint Results

The manufacturer part number 516-1 identifies this specific draw bolt, which supports repeatable results by allowing the same fastener specification to be used whenever a 516-1 draw bolt is called out on drawings or cut lists. Its 3-1/2 inch length works within the announced center to center range, creating a defined operating window from 2 inches to 3-1/2 inches that can be built into shop standards. Because the bolt is designed around 3/4 inch thick substrate, installers can base recurring joint setups on that thickness without adjusting to an unknown fastener geometry. As a Tite Joint fastener, it plays a specific role in clamping joint components together from within the material, which supports clean external surfaces where visible hardware is not desired.

Common Knape And Vogt Draw Bolt Questions

Selecting This Draw Bolt For Tite Joints

The Knape and Vogt 516-1 draw bolt gives a defined option when a 3-1/2 inch Tite Joint fastener is needed for 3/4 inch thick substrate. Its 2 inch to 3-1/2 inch center to center range supports several joint spacings under one specification. With a clear manufacturer part number and category placement as a Tite Joint fastener, this bolt aligns directly with Tite Joint and Dog Bone style connection details. For projects using that joint system, choosing this 516-1 draw bolt ties the field install back to a specific, repeatable fastener.