Knape and Vogt 3-1/2" Tite-Joint -516/100 ZC

Tite-Joint Fastener For 3/4 Inch Substrates

Tite-Joint fastener Knape and Vogt 3-1/2 inch Tite-Joint -516/100 ZC is a Tite-Joint fastener designed for 3/4 inch thick substrate, so it pulls typical 3/4 inch countertop or panel stock together in a controlled, repeatable way. The 3-1/2 inch reference in the product name ties directly to its reach across the joint, which supports solid engagement when joining standard-width panels. As part of the Tite Joints and Dog Bones product class, this fastener is intended to draw two sections together so the seam stays tight along the joint. The center to center 2 inch to 3-1/2 inch range defines how far apart mating bores can be placed and still allow the mechanism to clamp effectively, which matters when laying out boring patterns across different panel widths. The Knape and Vogt brand gives a clear, consistent identification when matching to shop drawings or replenishing stock for repeat jobs.

Key Tite-Joint Details For Woodworking Jobs

• The design for 3/4 inch thick substrate focuses the clamping action where most cabinet and countertop panels are used, which keeps layout consistent across multiple runs of similar work.
• The center to center 2 inch to 3-1/2 inch capability means the fastener can engage across a useful range of joint spans, giving flexibility in where bores are placed while still allowing a tight pull.
• The 3-1/2 inch Tite-Joint naming aligns with the maximum center distance, which helps installers translate drawings and measurements directly into boring locations on the job.
• The Tite Joints and Dog Bones classification signals that this part is meant to draw panels together along a seam, which supports clean, aligned joints in finished assemblies.
• The Knape and Vogt identification and 516/100 ZC manufacturer part number give an exact reference for reordering or matching project specifications in a shop or field setting.

Center-To-Center Layout And Fastener Fit

The center to center 2 inch to 3-1/2 inch specification defines the working window for hole spacing, so installers can bore within that range and expect the Tite-Joint fastener to engage and clamp across the joint. Because the fastener is designed for 3/4 inch thick substrate, boring depth and positioning can follow typical 3/4 inch panel routines, which keeps set-ups straightforward on common drilling equipment. The Knape and Vogt 3-1/2 inch Tite-Joint -516/100 ZC description ties the dimensional reach of the connector to its part identity, which helps field crews match the correct fastener when aligning multiple panel joints in a run.

Using This Tite-Joint Fastener In Assemblies

Where This 3-1/2 Inch Tite-Joint Fits Best

The Knape and Vogt 3-1/2 inch Tite-Joint -516/100 ZC sits within the Fasteners category under Tite Joint Fasteners, so it is intended for joints where two panel sections are pulled tightly together. Its design for 3/4 inch thick substrate means it aligns naturally with typical cabinet carcass panels, shelves, and many countertop substrates, where 3/4 inch stock dominates. The center to center 2 inch to 3-1/2 inch range allows the connector to serve joints with various widths between boring centers, which supports layouts from relatively tight bores up to wider spans. Because the product class is Tite Joints and Dog Bones, this fastener is positioned for use wherever a hidden mechanism is needed to pull flat panels into a common plane along a seam.

Details That Support Repeatable Tight Joint Results

The Tite-Joint fastener design tied to 3/4 inch thick substrate creates a consistent reference thickness, so jig settings and boring depths can be standardized across many projects using the same stock. The specified 2 inch to 3-1/2 inch center to center range offers a defined window for layout, which helps maintain reliable clamping even when different installers bore at slightly different spacings within that band. The 3-1/2 inch designation in the Knape and Vogt 3-1/2 inch Tite-Joint name anchors the maximum working span in everyday language, making it easier to communicate requirements between design, shop, and field. The manufacturer part number 516/100 ZC provides a precise identifier for this exact configuration, which supports consistent replacement, inventory tracking, and matching of joints across multiple sections in larger installations.

Installer Questions About 516/100 ZC Tite-Joint

Selecting This Tite-Joint For Panel Seams

The Knape and Vogt 3-1/2 inch Tite-Joint -516/100 ZC combines a design for 3/4 inch thick substrate with a 2 inch to 3-1/2 inch center to center working range, so it fits many standard panel joints. Choosing this specific 516/100 ZC Tite-Joint fastener keeps layout, boring, and clamping aligned with repeat cabinet and panel work, supporting consistent seams across projects handled through Wurth Baer Supply.