Knape and Vogt Tite-Joint Drill Guide -516-63

Knape And Vogt Tite-Joint Drill Guide Purpose

Knape and Vogt Tite-Joint Drill Guide is identified as manufacturer part 516-63, so a shop can match it directly to KV516 Tite Joint fasteners when laying out joints that need this specific drill pattern. The drill guide is designed for 3/4 inch thick substrate, which means the geometry of the guide is set up so common cabinet panels, tops, and shelves in that thickness line up correctly during drilling. Because the guide locates holes for Tite Joint fasteners, it supports repeatable joints across multiple panels, which saves layout time on production or batch work. Using a guide matched to the KV516 system helps keep hole location consistent from job to job, which reduces rework when assembling sections tightened by these fasteners. The branded Knape and Vogt design also ties into other KV fastening components, which helps shops keep their fastener drilling method consistent around one standard.

Key Drill Guide Details For Fastener Layout

• The drill guide is designed for 3/4 inch thick substrate, so the guide setup aligns hole placement to the center of panels commonly used in cabinets and furniture, supporting clean Tite Joint engagement without over-thinning material at the joint.
• Its specified center to center range from 2 inches to 3-1/2 inches means the guide handles a spread of joint spacings, allowing installers to set fasteners closer together on shorter runs or wider apart on longer seams while still following the same drilling tool.
• The classification under Tite Joints and Dog Bones defines this drill guide as part of a specific jointing system, helping shops organize tooling that belongs with KV Tite Joint fasteners for faster setup and fewer layout mistakes.
• The web description notes it is the drill guide for KV516, so users working with that Tite Joint configuration can select this part to maintain the manufacturer-intended hole pattern and fastener alignment during production.

Drill Guide Fit On 3/4 Inch Substrates

The drill guide is designed for 3/4 inch thick substrate, which aligns the guide to one of the most common panel thicknesses in cabinet and casework construction, so drilling operations follow familiar stock sizes. With this fixed thickness intent, the guide geometry positions the Tite Joint bores relative to panel faces in a predictable way, helping keep the fastener seated properly when two sections draw together. The center to center 2 inch to 3-1/2 inch range gives room to adjust fastener spacing while still operating within a layout the guide was built to support. Because the guide is tied to the KV516 Tite Joint system, shops using that fastener style can base their drilling workflow on a single, repeatable setup for joints built from 3/4 inch materials.

Using This Drill Guide In Tite Joint Work

Where This KV516 Drill Guide Fits Best

The drill guide is listed under Fasteners in the Tite Joints and Dog Bones product class, so it fits workflows where panels are pulled tight using the KV Tite Joint style rather than general-purpose fasteners. Being designed for 3/4 inch thick substrate focuses its use on cabinet cases, countertops, panels, and shelves built around that standard thickness, so crews working in those ranges can keep one dedicated drill guide on the bench. The center to center 2 inch to 3-1/2 inch capability provides flexibility along seams, giving users options to tighten short joints with closer spacing or support longer stretches with wider spacing, all while using one matched layout tool for KV516 joints.

How Verified Dimensions Support Repeatable Joints

Because the guide is matched to the KV516 Tite Joint fasteners, each drilled location reflects the geometry intended by the manufacturer, which helps resulting joints pull together square when tightened. The design for 3/4 inch thick substrate fixes the relationship between the guide and panel faces, so once an operator dials in a drilling routine, that routine can be repeated across many components without changing technique for the same thickness. The center to center range from 2 inches to 3-1/2 inches lets fabricators establish standard spacing patterns that fit their projects, then reuse those patterns across jobs while still staying inside the dimensional limits of the guide. This alignment between fastener type, drill guide, and material thickness supports consistent joint appearance and predictable clamping behavior on assemblies that use Tite Joint fasteners as part of their structure.

Common Questions About The KV516 Drill Guide

Selecting This Drill Guide For KV516 Joints

The Knape and Vogt Tite-Joint Drill Guide 516-63 ties directly to the KV516 Tite Joint system, which suits shops that want their drilling layout aligned with a defined fastener pattern. Its design for 3/4 inch thick substrate and center to center 2 inch to 3-1/2 inch range supports consistent panel joints in that material and spacing window. For operations building casework or panel assemblies around KV Tite Joint fasteners, this drill guide gives a dedicated layout tool that reflects the same dimensions described for the KV516 configuration.