Knape and Vogt 3-1/2" Locking Sleeve -516-60

Knape And Vogt Locking Sleeve For Tite Joints

Knape and Vogt locking sleeve 516-60 is a 3-1/2 inch Tite Joint fastener component designed for building joints in 3/4 inch thick substrate. The sleeve locks onto matching Tite Joint components, helping pull mating panels together so seams stay tight under load. Because it is part of the Tite Joints and Dog Bones product class, it fits into fastener layouts where installers rely on concealed connectors rather than surface-mounted brackets. As a Knape and Vogt fastener from the Tite Joint Fasteners category, it supports repeatable panel-to-panel alignment in cabinet, countertop, or casework runs where a consistent joint line is critical. The 516-60 designation matches the manufacturer part number, which helps installers and shops reorder the same locking sleeve when expanding existing runs or duplicating proven layouts on new projects.

Key Locking Sleeve Details For Trade Use

• The 3-1/2 inch locking sleeve length gives installers a defined engagement span, helping distribute clamping force along the joint so the connection supports typical woodworking loads without relying only on edge screws.
• Design for 3/4 inch thick substrate targets common cabinet and countertop materials, so fabricators can plan joints around standard sheet goods without changing core construction thickness.
• The center-to-center range of 2 inches to 3-1/2 inches allows flexible layout of Tite Joint positions, letting installers position fasteners where structure, clearance, and tooling access line up.
• Placement within the Tite Joint Fasteners category signals that this sleeve serves as a locking component in a multi-part system, which helps shops coordinate drill patterns and assembly steps with matching parts.
• The 516-60 manufacturer part number ties directly to Knape and Vogt documentation, simplifying specification on cut lists, purchase orders, and repeat builds that rely on consistent fastener sourcing.

Locking Sleeve Fit And Joint Layout Planning

This Knape and Vogt 3-1/2 inch locking sleeve works with substrates that are 3/4 inch thick, so layout decisions can follow standard panel builds instead of custom thickness runs. The specified 2 inch to 3-1/2 inch center-to-center range guides drilling jigs and boring patterns, which helps production teams keep fastener rows straight and joints square. Because it sits in the Tite Joint Fasteners family, the sleeve supports concealed joint construction where the clamping action happens inside the material, leaving faces clear for edging, laminates, or finish work. The 516-60 designation aligns the part with Tite Joints and Dog Bones components, enabling installers to pair joints consistently across a run of cabinets or work surfaces.

Using This Locking Sleeve In Woodworking Runs

Where The 516-60 Locking Sleeve Fits Best

The 516-60 locking sleeve sits in the Knape and Vogt Tite Joints and Dog Bones product class, positioning it for use wherever concealed mechanical panel joints are required. Because it is designed for 3/4 inch thick substrate, it matches typical cabinet-grade plywood, particleboard, and similar sheet stock used in casework, countertop build-ups, and fixture panels. The center-to-center range of 2 inches to 3-1/2 inches gives layout flexibility along rails, stretchers, and underside runs where installers want joints spaced to balance support and drilling time. As part of the Tite Joint Fasteners category from Wurth Baer Supply, this sleeve integrates into fastener plans on woodworking projects that rely on internal connectors instead of exposed brackets for joining sections.

Details That Support Repeatable Joint Alignment

The defined 3-1/2 inch locking sleeve format helps fabricators standardize boring depths and drilling fixtures, which in turn supports consistent pull-up of seams along long runs. The 3/4 inch substrate design simplifies jig design, because boring depths and offsets can match a single material thickness across cabinets or countertops. With the center-to-center span specified between 2 inches and 3-1/2 inches, shops can document joint spacing on shop drawings so each installer replicates the same layout sequence on site. The clearly defined manufacturer part number 516-60 aids repeat ordering and inventory labeling, reducing mix-ups between different fastener styles inside the Tite Joints and Dog Bones class. As a Knape and Vogt component distributed by Wurth Baer Supply, it fits into professional workflows where consistent fastener sourcing supports predictable installations.

Common Questions About The 516-60 Locking Sleeve

Selecting This Locking Sleeve For Your Next Run

The Knape and Vogt 3-1/2 inch locking sleeve 516-60 gives installers a defined solution for joints in 3/4 inch thick substrate with 2 inch to 3-1/2 inch center-to-center spacing. As part of the Tite Joint Fasteners lineup at Wurth Baer Supply, it fits professional workflows that depend on concealed connectors and repeatable layouts across cabinets, countertops, and casework sections. When panel joints need mechanical pull-up inside standard sheet goods, this 516-60 locking sleeve matches the dimensions and product class required for consistent Tite Joint assemblies.