
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt tightening rod is a dedicated component in the Tite Joint fasteners family that pulls two 3/4 inch thick substrates tightly together. This design creates strong joints between panels, which matters when aligning tops, shelves, or work surfaces where a flush, solid seam is important. The tightening rod carries the pulling load inside the joint, so installers can draw parts together from a concealed location, helping maintain a clean surface. As part of Tite Joints and Dog Bones, it works within that system to create repeatable, consistent joints across multiple panels. The 516-62 identification ties it directly to the KV516 series, which helps maintain consistency across jobs when matching other Tite Joint fasteners. Sold through Wurth Baer Supply, it fits into a fastener line geared toward woodworking and cabinet-related work.
The Knape and Vogt tightening rod with a 2 inch to 3-1/2 inch center to center specification gives installers a defined layout window for drilling and assembly. By working within this band, the Tite Joint fasteners can pull two 3/4 inch thick substrates together effectively, supporting tight seams on typical woodworking projects. The center-to-center guidance simplifies planning for repetitive drilling operations, since crews can set jigs or stops around that range and return to the same settings on multiple panels. That helps keep joints consistent across a run of tops or casework. Tying the rod to the KV516 designation also keeps part selection straightforward in the shop when matching rods to other Tite Joint components.
The Knape and Vogt tightening rod is described for 3/4 inch thick substrate, aligning with common sheet goods used in woodworking, casework, and similar projects. This thickness detail guides where the rod is best applied: panel joints built from 3/4 inch material, such as many countertops, shelves, and cabinet assemblies. In these applications, the rod works as part of the Tite Joint fasteners group, so it plays a central role wherever that system is specified. The 2 inch to 3-1/2 inch center to center range further shapes typical layouts, making the rod particularly relevant on joints where that spacing can be maintained along the seam.
The 2 inch to 3-1/2 inch center to center dimension on the KV516 tightening rod defines the working span between Tite Joint components, which affects how evenly force is distributed across a joint. Staying within that range enables the rod to pull 3/4 inch thick substrates together with predictable clamping, helping joints seat flush along their length. This clarity on spacing also supports repeatable jig and template setups in production environments, where the same hole pattern is used across multiple parts. The 516-62 part number connection to the KV516 designation allows shops to standardize on a known rod layout, reducing guesswork when matching rods to existing drilling patterns in ongoing work.
The Knape and Vogt tightening rod is designed for 3/4 inch thick substrate, aligning with common panel thicknesses so joints can be pulled tight without overcomplicating layout choices.
The 2 inch to 3-1/2 inch center to center range sets the spacing between Tite Joint components, guiding where holes are drilled so the rod can apply effective clamping force along the joint.
The 516-62 designation identifies this specific tightening rod within the KV516 group, helping shops reorder the same component and align it with existing Tite Joint fasteners.
The tightening rod functions as a pulling element within the Tite Joint fasteners system, drawing 3/4 inch thick substrates together to create tight, mechanically fastened panel joints.
The 3/4 inch substrate detail matches many standard sheet goods, so the KV516 tightening rod can be applied confidently to typical cabinet and countertop panels built from that thickness.
As part of Tite Joints and Dog Bones, the tightening rod is typically used wherever that system is specified for joining 3/4 inch thick panels in woodworking or related projects.
The Knape and Vogt tightening rod with 516-62 designation gives tradespeople a defined solution for pulling together 3/4 inch thick substrates within a 2 inch to 3-1/2 inch center to center layout. That combination of thickness focus and spacing range aligns with many cabinet, shelving, and work-surface joints built around Tite Joint fasteners. For shops already using Tite Joints and Dog Bones, matching the KV516 tightening rod to existing patterns supports consistent, repeatable assembly on both small and large runs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV516-1 Mfr# 516-1 | Knape and Vogt 3-1/2" Draw Bolt -516-1 | ||||
Sold in: 100 Each | KV516-100 Mfr# 516/100 ZC | Knape and Vogt 3-1/2" Tite-Joint -516/100 ZC | ||||
Sold in: 25 Each | KV516-25 Mfr# 516/25 ZC | Knape and Vogt 3-1/2" Tite-Joint -516/25 ZC | ||||
Sold in: 1 Each | KV516-60 Mfr# 516-60 | Knape and Vogt 3-1/2" Locking Sleeve -516-60 | ||||
Sold in: 1 Each | KV516-63 Mfr# 516-63 | Knape and Vogt Tite-Joint Drill Guide -516-63 | ||||
Sold in: 1 Each | KV516-64 Mfr# 516-64 | Knape and Vogt Tite-Joint Drill Bit -516-64 | ||||
Sold in: 1 Each | KV516-80 Mfr# 516-80 100 | Knape and Vogt 3-1/2" Tightening Assembly -516-80 100 |