Berenson Advantage Plus Two 3" (76 mm) Center to Center Polished Chrome Pull, 0971-126-P

Berenson Advantage Plus Two Pull For Cabinets

Berenson Advantage Plus Two pull defines this 3 inch center to center polished chrome handle as part of Berenson Corporation's Advantage Series, which gives installers a clear match when repeating hardware across a project. The zinc die cast material provides a solid, consistent base, which supports predictable drilling and fastening in cabinet doors and drawers. The polished chrome finish reflects light cleanly, which helps this pull visually align with other chrome decorative hardware on the same run. A 3 inch center to center dimension sets the precise hole spacing, which simplifies layout when replacing existing 3 inch pulls or drilling new fronts. The overall 3-3/8 inch length keeps the pull proportional to common cabinet rail sizes, which helps it sit comfortably on both doors and smaller drawers. A 1-3/16 inch projection creates usable finger clearance, which matters when gripping the pull on thicker drawer fronts.

Key Details That Support Cabinet Hardware Work

• The pull's 3 inch center to center measurement defines the exact bore spacing, which streamlines jig setup and speeds repeat drilling across multiple cabinet fronts.
• The 3-3/8 inch overall length keeps end-to-end size close to the bore pattern, which helps the pull land neatly on face frames and slab fronts without overhanging edges.
• The 1-3/16 inch projection sets how far the pull stands off the surface, which provides consistent hand clearance and reduces knuckle contact when opening doors or drawers.
• The 1/8 inch width gives the pull a lean front profile, which helps it sit visually light on narrow rails while still presenting a defined gripping edge.
• The 3/8 inch base diameter at each mounting point defines the footprint on the cabinet surface, which helps cover standard 3 inch bore holes with a clean, finished look.
• The 8-32 x 1 inch screw size matches a common cabinet fastener standard, which supports straightforward threading into the zinc die cast pull during installation.

Installation Dimensions For Accurate Pull Placement

This Berenson Advantage Plus Two Series pull uses a 3 inch center to center spacing, which gives installers a fixed measurement for drilling or aligning existing holes. The 3-3/8 inch overall length provides a small reveal beyond the mounting points, which helps position the pull evenly on rail and stile constructions. A projection of 1-3/16 inch determines the stand-off from the cabinet face, which sets consistent reach and clearance for hands. The 3/8 inch base diameter defines the bearing surface against the cabinet, which supports a stable seat when the pull is tightened. With a width of 1/8 inch across the gripping area, the pull presents a slim profile, which can be useful on modern, clean-lined cabinet designs.

Using This Polished Chrome Pull In Cabinet Projects

Where This Polished Chrome Pull Fits Best

This Berenson Advantage Plus Two Series 3 inch center to center polished chrome pull is positioned for use on cabinet doors and drawers where a defined 3 inch bore pattern is required. The polished chrome finish ties directly to other polished chrome decorative hardware, which helps maintain a consistent appearance on full kitchen or bath runs. Its 3-3/8 inch overall length works well on standard residential cabinet fronts, which helps installers balance scale between wall cabinets, base cabinets, and vanities. The zinc die cast construction supports applications across the decorative hardware and moldings category, which keeps the pull aligned with other handles and pulls specified on the project. Being part of the Advantage Series provides an identifiable collection point, which helps designers and buyers coordinate multiple pulls and handles within the same visual family.

Details That Support Repeatable Cabinet Installations

The defined 3 inch center to center dimension on this pull supports repeatable drilling using common cabinet hardware jigs, which can speed production work on larger jobs. A 1-3/16 inch projection gives the pull a known stand-off, which helps installers predict how it will clear door edges and adjacent fronts. The narrow 1/8 inch width along the grip creates a compact profile, which can simplify alignment on narrow rails or tight drawer faces. A 3/8 inch base diameter establishes a consistent contact area at each mounting point, which helps distribute clamping force against the cabinet surface when tightened. The zinc die cast material provides a uniform threaded interface for the 8-32 x 1 inch screw size, which supports reliable fastening when pulling the handle up to the door or drawer front. As a Berenson Corporation handle classified under handles and pulls, the part number 0971-126-P gives installers and buyers a precise identifier, which helps match this exact pull across reorders or phased projects.

Common Installer Questions About This Berenson Pull

Selecting This Pull For 3 Inch Cabinet Layouts

This Berenson Advantage Plus Two pull brings a defined 3 inch center to center spacing, a 3-3/8 inch overall length, and a polished chrome finish together in one zinc die cast handle, which suits many cabinet door and drawer layouts. The combination of 1-3/16 inch projection, 1/8 inch width, and 3/8 inch base diameter creates predictable clearance and bearing surfaces, which supports consistent results across a run of cabinets. For projects that standardize on polished chrome decorative hardware with 3 inch hole spacing, this 0971-126-P pull from Berenson Corporation gives a clearly identified option ready to match that layout.