Berenson ZZ 3" (76 mm) Center to Center Polished Chrome Pull, 1767-126-P

Berenson ZZ Series 3 Inch Pull For Cabinets

Berenson ZZ Series 3 inch pull gives a cabinet or drawer a traditional handle layout using a 3 inch center to center mounting pattern, so it suits jobs laid out on that standard. The Advantage Plus Two cabinet pull design is described as Mix and Match and Traditional, which supports projects where a consistent classic look is needed across multiple openings. The pull is made from zinc, which provides a solid metal grip point for daily use on doors or drawers. A polished chrome finish adds a bright, reflective surface that coordinates with other chrome decorative hardware on the job. The pull length of 5-1/4 inches gives the hand a longer gripping area around the 3 inch screw spread, which can help on wider drawer fronts. A projection of 1 inch holds the gripping surface away from the cabinet face for finger access.

Key Details Of This Polished Chrome Pull

• The 3 inch center to center dimension sets the screw hole spacing, which matches many common cabinet drilling jigs for straightforward layout on doors and drawers.
• The 5-1/4 inch overall length extends past the mounting points, giving more handle to grab, which can be helpful on wider faces or heavier fronts.
• The 1 inch projection sets the stand-off from the cabinet surface, creating room for fingers between the pull and the face during opening and closing.
• The 1/2 inch width defines the front bar thickness, shaping how the pull feels in the hand along its length during operation.
• The 5/8 inch base diameter at each end gives a defined footprint on the cabinet surface, which affects the visual proportion against rails and stiles.
• The polished chrome finish delivers a smooth, shiny appearance that ties together with other chrome decorative hardware in the same space.
• The zinc material provides a metal body for the pull, giving a firm gripping surface on cabinet doors and drawers.

Mounting And Fit Details For This Cabinet Pull

The 3 inch center to center cabinet pull dimension sets the key fit requirement, aligning with doors or drawers already drilled on a 3 inch pattern. The 8-32 x 1 inch screw size specification defines the threaded connection into the pull, tying it to standard 8-32 cabinet boring. A projection of 1 inch fixes how far the pull stands off the cabinet face, which affects hand clearance during use. The 5/8 inch base diameter at each end shows how much flat surface on the cabinet rail or drawer front is covered by the pull feet. The 1/2 inch width of the handle bar influences how the pull sits visually on narrow or wide rails while still leaving space around it.

Using This Advantage Plus Two Pull In Real Projects

Where This 3 Inch Cabinet Pull Fits Best

The Advantage Plus Two cabinet pull with 3 inch center to center mounting works on cabinets or drawers laid out on that standard spacing, keeping hole locations consistent across a run. Its total length of 5-1/4 inches lets the pull span more of the drawer or door width than the mounting distance alone, which can balance proportions on medium-size fronts. The 1 inch projection sets the handle off the face, which helps provide finger access between the bar and the cabinet surface when a door or drawer is pulled open. The 5/8 inch base diameter at each mounting point defines the contact circle against the cabinet, which can visually frame the pull on face frames or slab fronts. The 1/2 inch width of the front bar shapes how the pull presents on narrow rails, helping it sit within the stile width while still offering a usable grip area.

Details That Support Consistent Cabinet Install Results

The Berenson polished chrome pull 1767-126-P uses a 3 inch center to center pattern, which simplifies repetitive drilling and layout when multiple doors and drawers share the same handle. The 8-32 x 1 inch screw size is a standard cabinet hardware thread, which aligns with common boring and fastening practices on site or in the shop. The zinc material gives the pull a solid metal construction that pairs with the polished chrome finish, resulting in a uniform look across a full installation. The polished chrome finish creates a reflective surface that coordinates with other chrome decorative hardware and moldings from the same space, supporting a unified appearance. The 5-1/4 inch length and 1 inch projection work together to position the grip in front of the cabinet face, which can aid in repeatable hand placement across all openings in a run.

Common Questions About This Berenson Cabinet Pull

Selecting This Pull For 3 Inch Cabinet Layouts

The Berenson ZZ Series 3 inch pull combines a 3 inch center to center drilling pattern with a 5-1/4 inch overall length, matching cabinets laid out on that spacing while extending the grip area. Its zinc construction and polished chrome finish create a metal handle that coordinates with other chrome decorative hardware and moldings. With a 1 inch projection, 1/2 inch width, and 5/8 inch base diameter, the pull sets clear footprint and stand-off dimensions for planning door and drawer fronts. Use these verified details to match your cabinet layouts and visual goals with this Advantage Plus Two cabinet pull.