Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
5/16 hose assembly 25 ft describes an air hose assembly from C.A. Technologies that uses a 5/16 inch hose size and 25 foot length, which gives spray operators a defined reach between air source and spray gun position. The air hose portion has a working pressure of 200 psi, so it supports typical compressed air demands in spray equipment setups without being overstressed in normal operation. The hose operates in a temperature range from -20 to +190 degrees F, which keeps the assembly usable in a wide range of shop or jobsite temperatures where air lines feed spray guns. A smooth red synthetic rubber casing on the air hose provides an identifiable outer surface that stays easier to route along walls or floors while protecting the internal textile reinforcement. The textile reinforced construction strengthens the air hose wall so it holds pressure while staying flexible for positioning during spraying.
This C.A. Technologies air hose assembly length of 25 feet gives a set distance to route between compressor or air source and the spray gun station, which helps plan hose runs along walls, ceilings, or across shop floors. The smooth red synthetic rubber casing on the air hose lets the line slide more easily around corners or over supports during installation, which can reduce drag when an operator repositions the spray gun while working. The oil resistant casing supports routing the hose through areas where lubricants or overspray may contact the exterior, so the cover continues to protect the textile reinforcement underneath. On the fluid side, the smooth black synthetic rubber casing rated as RMA B ORS offers a defined protective cover for the fluid hose, which helps maintain the integrity of the braided high strength synthetic yarn reinforcement during normal routing.
This air hose assembly is classified under spray equipment and spray guns, which places it in applications where compressed air powers spray guns or related tools. The 5/16 inch hose size combined with a 200 psi working pressure rating on the air hose positions it for air delivery duties that fall within that pressure band, so it suits many shop air and spray gun feeds that do not exceed this level. The -20 to +190 degrees F temperature range on the air hose allows the line to operate in unconditioned or partially heated spaces where temperatures can vary, so the hose remains serviceable as ambient conditions shift during the year. The oil resistant smooth red synthetic rubber casing is well suited to environments where air hoses encounter oil mist, lubricants, or overspray, so the exterior cover continues shielding the textile reinforcement from direct exposure. For the fluid path, a temperature range of 0 to 190 degrees F positions the fluid hose for coatings that typically move through the hose near ambient temperatures, so the tube and reinforcement remain within their designed band during spraying.
The textile reinforced construction of the air hose helps maintain internal shape when pressurized up to 200 psi, which supports steadier airflow to spray guns and can contribute to more consistent atomization where pressure stability matters. The smooth red synthetic rubber casing also aids hose visibility along floors or walls, so operators can trace air lines more quickly during setup or adjustments and keep routing organized around other hoses and electrical cords. Oil resistance in both the air hose casing and the smooth black synthetic rubber casing on the fluid hose means that external contact with typical shop oils and solvents is less likely to affect the covers, which helps preserve reinforcement and hose performance over time in standard spray environments. The fluid hose tube made from nylon 11 is specified as silicone-free, which helps maintain coating system cleanliness where silicone contamination would interfere with coating appearance or performance. A 750 psi working pressure on the fluid hose supports higher fluid pressures found in many spray systems, so the reinforced structure provides a margin within that rating to handle typical operating loads.
The air hose portion has a 200 psi working pressure rating, so it handles typical compressed air demands for many spray equipment setups within that pressure band.
The air hose operates from -20 to +190 degrees F, which keeps it functional in cooler or warmer shop and jobsite conditions where spray guns are used.
The air hose uses textile reinforcement in its wall, which supports pressure containment up to 200 psi while allowing flexibility for routing and handling.
The fluid hose uses a nylon 11 silicone-free tube, braided high strength synthetic yarn reinforcement, and a smooth black synthetic rubber casing with 750 psi working pressure.
The nylon 11 silicone-free tube provides a fluid path without silicone from the tube material, which matters where coatings are sensitive to surface contaminants.
The fluid hose is rated from 0 to 190 degrees F, which suits many coating materials that move through the hose at or near ambient temperatures during spraying.
The 5/16 inch hose assembly with 25 foot length from C.A. Technologies combines textile reinforced air hose at 200 psi working pressure with an oil resistant smooth red synthetic rubber casing, which supports dependable air delivery in spray environments. Its -20 to +190 degrees F air hose temperature range and oil resistant cover suit varied shop conditions where spray guns operate. The paired fluid hose using a nylon 11 silicone-free tube, braided high strength synthetic yarn reinforcement, and 750 psi working pressure extends the assemblys role into coating transfer. Use the verified working pressures and temperature ranges to match this assembly to spray equipment needs that fit within these ratings.
Sold In: 1 Each